|
Prop kits containing thrust washer, spacer, nut and cotter pin.
|
47.59 |
|
|
Prop kits containing thrust washer, spacer, washer and nut. Complete kit contents depends upon application.
|
39.59 |
|
|
Fits: OMC 85-140 HP late-model V4. Replaces: O.M.C. 385529, 389954, 585051, 585057, 586283. Small 10-tooth drive gear. Uses DV372* replacement drive gear, DVK72* 2-piece drive kit( fits current-model starters), SR372 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
180.12 |
|
|
Fits: OMC 1985-Up, 120-140 HP V4. Replaces: OMC. 393570, 585060, 586285. 10-tooth drive gear. Uses*DV386 replacement drive gear, *DVK86 2-piece drive kit (fits current-model starters), SR386 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!
|
186.39 |
|
|
Prop kits containing thrust washer, spacer, washer and nut. Complete kit contents depends upon application.
|
36.99 |
|
|
Prop installation hardware, sold 1 piece per package.
|
6.79 |
|
|
Prop installation hardware, sold 1 piece per package.
|
7.69 |
|
|
Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.
|
77.79 |
|
|
D-Series Pro Dually Spot Surface Mount Pair - Midnight Edition
It is all about stealth with RIGID's Midnight Diffused Lens. Available in SR-Q, SR-M, and D-Series, these lights feature blacked-out hardware, blacked-out spot optics, and a blacked-out Diffused Lens. The Midnight Optics along with the smoked diffused lens enable RIGID to virtually disappear during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition PRO now offers more light output than ever before. Own The Night with RIGID's D-Series Midnight Edition original LED pod lights.
Features:
Translucent Black Enamel on our Patented Hybrid Spot Optics
All Black Assembly Hardware
Special Black Polymer Coated Circuit Board
50,000 Plus Hour Lifespan
9-36 V DC
Durable UV Resistant Powder Coat
High-Grade Aluminum Alloy
Integrated Thermal Management System
Impact Resistant Polycarbonate Lens
Over/Under Voltage Protection
RFI/EMI Protection
Reverse Polarity Protection
RoHS Compliant
IP68 Compliant - Dust/Water Ingress
Operating Temp -40 Deg F To +145 Deg F
SAE J575 Compliant - Shock/Vibration
Limited Lifetime Warranty
Off Road Use Only
Whats Included?
Mounting Hardware
Black Powdercoat, U-Shape Bracket (Excludes FM)
Harness w/Switch
Deutsch Connector
|
177.67 |
|
|
Prop installation hardware, sold 1 piece per package.
|
7.79 |
|
|
Prop installation hardware, sold 1 piece per package.
|
6.89 |
|
|
Prop installation hardware, sold 1 piece per package.
|
30.89 |
|
|
Prop installation hardware, sold 1 piece per package.
|
49.59 |
|
|
Prop installation hardware, sold 1 piece per package.
|
28.59 |
|
|
Smart Tab Trim Tabs 9 X 8 f/12-16' Boats w/40-80 HP
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATED
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
116.16 |
|