|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
52.99 |
|
|
Sierra Nissan & Tohatsu fuel fittings.
|
21.49 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
52.99 |
|
|
IG030 Ignition Pack for Nissan/Tohatsu Outboard Engines
This ARCO ignition pack is designed for specific Nissan/Tohatsu outboard engines.
Fits:
2002 along with Prior M and NS Model 15D2, 18E, E2, 9.9D, D2; 2003 15D2, 18E2, 9.9D2
Replaces:
TOHATSU Ignition Pack 3G2060602M
TOHATSU Ignition Pack 3G2060603M
SIERRA Ignition Pack 18-5134
CDI Ignition Pack 119-3202
Warranty Information
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration.
|
30.32 |
|
|
Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)
TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.
|
26.48 |
|
|
Mercury 8, 9.9 (2005-Present), Johnson Evinrude 9.8 (2013-Present) & Nissan/Tohatsu 8, 9.8 with Remote TH
TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.
|
26.48 |
|
|
Suggested for high horsepower engines (115HP and up). Built for extreme use. May be used in either freshwater or saltwater on stainless propellers.
|
69.99 |
|
|
Recommended for low to high horsepower under regular use. May be used in freshwater and occasionally in saltwater. Use with aluminum and stainless propellers.
|
54.99 |
|
|
M-Q2 Series Drive/Down Diffused Spreader Light - Single
The Q-Series PRO is designed and built to withstand the harshest working environments imaginable. Constructed of the toughest and most durable materials available, including a double-pass TIG-welded stainless steel bracket with vibration isolator, the Q-Series PRO provides reliable, powerful LED light and is tough enough to withstand mining, agriculture, construction, and the oil and gas industries. The rugged construction also makes it well suited to extreme environments. If the application is severe, the Q-Series PRO is the ultimate lighting solution.
RIGID’s Q-Series PRO lights are also available with a durable white finish. Though suitable for marine applications, RIGID’s white lighting products are perfect for use anywhere an alternative to black is desired. The distinctive white is a durable UV-resistant powder coated finish with an additional chromate conversion coating for superior corrosion resistance. They feature the same legendary lighting technology and superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.
Features:
GORE® Pressure Equalizing Vent
Unbreakable Polycarbonate Lens
Durable UV 3800 Polyester Powdercoat
IP68 Certified
MIL810-STDG Vibration Certified
ROHS Compliant
Over/Under Voltage Protection
Operating Temp -40º F +145º F
Sealed Deutsch Connector
50,000+ Hour Lifespan
Electrically Protected Against RFI/EMC Interference
Integrated Thermal Management System
Specifications:
Watts: 195
Amp Draw: 13.9
LED's: 24
Raw Lumens: 19008
Lux @ 10m: 445.87
Beam Distance: 211.2 m
Peak Beam Intensity: 44,587 cd
|
540.00 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Grey - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
184.74 |
|
|
A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket - Black/Red - Adult
The Onyx A/M-24 Series All Clear Automatic/Manual Inflatable Life Jacket's low profile design provides you with comfort on the water while also keeping you safe and giving you peace of mind.
Features:
Convertible to Manual Only inflation mode (pull-cord and oral inflator tube)
All-Clear viewing window for an at-a glance look to make sure the vest is properly armed and ready to use (Green indicates you are properly armed, while Red shows you need to re-arm)
Lightweight low-profile design
Soft extended neoprene neckline for all day comfort
Quickburst® zipper for easier repacking
Inflation handle clips to life jacket to prevent snags
Durable nylon oxford fabric outer cover resists tears and punctures
Reflective material for increased visibility
Supplied with owner's manual and "Think Safe" booklet
Technical Specifications:
Chest Size - 30"-65"
Material - Nylon ripstop and oxford fabrics
|
167.99 |
|
|
Harness Extension 1M f/E/M/SR Series
This Add-a-Light Extension gives you an additional 1 meter of length to allow for more versatility and installation options. It features 16 AWG wire and a Deutsch connector. This harness extension is designed to be used with E-Series or SR-Series light bars that are 20" or longer.
Features:
16 AWG Wire
Deutsch Connector
Inline Fuse Holder
|
33.74 |
|
|
3 Blade stainless propeller for Mercury 40 horsepower and Nissan/Tohatsu 35-50 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case, Japan origin Tohatsu.
|
249.99 |
|
|
3 Blade stainless propeller for Mercury 40 horsepower and Nissan/Tohatsu 35-50 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case, Japan origin Tohatsu.
|
249.99 |
|
|
3 Blade stainless propeller for Mercury 40 horsepower and Nissan/Tohatsu 35-50 horsepower engines with 13 tooth spline and thru hub exhaust. 3-1/4" gear case, Japan origin Tohatsu.
|
249.99 |
|