|
3 Blade stainless propeller for 25-30 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case, Japan origin.
|
193.99 |
|
|
2301 150AMP Common BusBar 10 x #8-32 Screw Terminal
Features:
Stud design provides direct terminal to bus contact for low resistant connection
Stainless steel studs and screws allow high torquing for excellent electrical contact
Tin-plated copper bus for maximum conductivity and resistance to corrosion
UL 94-VO rated (self extinguishing) base material resists high heat
Raised bus provides easy access to multiple wires on a single screw
UL 94-VO rated base material resists high heat
Captive star type lock washers for anti-rotation and eliminate handling of small, easily dropped parts
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.44 |
|
|
2300 150AMP Common BusBar 10 x #8-32 Screw Terminal with Cover
Features:
Stud design provides direct terminal to bus contact for low resistant connection
Stainless steel studs and screws allow high torquing for excellent electrical contact
Tin-plated copper bus for maximum conductivity and resistance to corrosion
UL 94-VO rated (self extinguishing) base material resists high heat
Press on insulating cover attaches to studs and allows unobstructed wire access
Raised bus provides easy access to multiple wires on a single screw
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.93 |
|
|
2702 DualBus 100AMP Common BusBar 10 x 8-32 Screw Terminal
Features:
Combines negative and positive buses on one block
Tin-Plated Copper CDA 110 / UNS 11000
UL 94-V0 Rated, Glass Reinforced Thermoplastics
#8-32 Screw
10 per bus
Maximum Voltage: 300V AC / 48V DC
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.76 |
|
|
10" x 8" Trim Tab Set
Features:
Wiring - Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull, and insulation, making installation easy.
Solenoids - They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating drift back. Barb-type hose fittings provide tight, secure connections.
Motor - A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.
Brackets - Swivel-type brackets allow cylinders to be mounted and adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.
Pump - Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.
Motor Cover - 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.
Cylinders - Impact-resistant, fiberglass-reinforced nylon cylinders eliminate expansion and resist ultra-violet rays. Two expanding type seals, plus O-ring, eliminate high and low-pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevent hose blow-off and breakage. A stainless steel spring retracts the cylinder when the boat is not in motion.
Trim Tabs - 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.
Hose - Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim. Stainless steel clamps hold the hose to barb fitting at the solenoid.
Rocker Type Controls - Mounted on the dash they are easy to operate. One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.
|
531.82 |
|
|
10' x 8' Inflatable Deck - Drop Stitch
Features:
Large platform for up to 5 people
Heavy-duty construction, stable and durable
High-pressure, quick-release valve
6 docking hooks and 8 carry handles
Includes pump and backpack
Perfect for boats and kayaks
Ideal for watersports, fishing, or relaxing
Specifications:
Inflated size: 10' x 8'/6" thick (305cm x 244cm), 26G PVC
Weight capacity: 1400lbs
Ages: 15 and up
|
516.28 |
|
|
10' x 8' Inflatable Dock
The 10' x 8' dock is constructed to comfortably fit up to 8 people, making it the perfect size to party, play, relax, or unwind on the water. Throw on your chairs and cooler, and you have yourself your own private island.
The inflatable dock was invented with one goal in mind: to create a floating “home base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up.
The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless.
Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel.
PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments.
Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks.
Features:
Ties up to anything, anywhere
Accommodates chairs, coolers, and more
Doubles as a portable water sports launch pad
Modular design for easy connection
Equipped with high-pressure Halkey Roberts (HR) valve
Additional 80 square feet of floating real estate
Pet-friendly PVC material
Equipped with (6) D-Rings to attach necessary tools
Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock
Allows access to hard-to-reach spots you couldn't before
Technical Specifications:
Folded size - 29" x 18" x 10"
Inflated size - 10' (L) x 8' (W) x 6" (H)
Recommended pressure - 10 PSI
Weight - 48 lbs
In the Box:
Floating dock
Pump
Carry bag
Repair kit
|
574.92 |
|
|
10' x 8' Convertible Slide Dock
Inflatable 10' x 8' dock with a built-in slide. Converts from slide to a flat dock accommodating up to 8 people with minimal tossing, turning, or tipping. Built-in step system measuring 28" that attaches uses adjustable straps.
Features:
6-8 person capacity
Built-in slide
Non-slip traction pads for extra grip
Collapsible slide for flat dock functionality
28" supports for slide with built-in step
Nylon looping system for support steps
8 super-strong, reinforced grab handles
4 stainless-steel D rings
3 high-pressure HR valves for quick inflate/deflate
Technical Specifications:
Recommended pressure - 10 PSI
Folded Size - 31" x 24" x 10"
Weight - 76 lbs
In the Box:
Slide Dock
Pump with gauge
Duffle-style carry bag
Repair kit
|
715.90 |
|
|
10' x 8' Luxe Dock with Traction Pad and Ladder
The 10' x 8' dock is constructed to comfortably fit up to 8 people with minimal tossing, turning, or tipping. The faux-wood traction pad for luxury look & feel. Dock is constructed with an 8" core providing additional buoyancy & stability.
The inflatable dock was invented with one goal in mind: to create a floating “home-base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up.
The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless.
Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel.
PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments.
Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks.
Features:
Ties up to anything, anywhere
Accommodates chairs, coolers, and more
Doubles as a portable water sports launch pad
Modular design for easy connection
Equipped with high-pressure Halkey Roberts (HR) valve
Additional 80 square feet of floating real estate
Pet-friendly PVC material
Rope style ladder
Faux-wood ultra-cushioned, non-slip traction pad material that creates a luxury look and feel.
Equipped with (6) D-Rings to attach necessary tools
Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock
Allows access to hard-to-reach spots you couldn't before
Technical Specifications:
Folded size - 33" x 26" x 11"
Inflated size - 10' (L) x 8' (W) x 8" (H)
Recommended pressure - 10 PSI
Weight - 68 lbs
In the Box:
Floating dock
Pump
Carry bag
Ladder
Repair kit
|
804.41 |
|
|
10' x 8' Rec Mesh Dock with Removable Insert
Inflatable 10' x 8' rectangular dock with removable inset dock offering a mesh hangout area. Utilize one side of the dock to lounge with chairs, coolers, and more while also enjoying the mesh in-water seating area. The mesh center is removable. 5' x 4' inset dock when removed can be tied up to create additional dock space holding coolers, watersports gear, and more. The dock is constructed with an 8" core providing additional buoyancy & stability. Fits up to 8 people with minimal tossing, turning, or tipping. Portable & compact when folded for easy storage.
Features:
Super-rigid, high-pressure, drop-stitch construction
Comfortably supports standing and sitting adults
Portable and compact for easy storage
5' x 4' removable mesh hangout area
The removable insert dock can be used as a separate dock when removed
Thick 8" core for buoyancy and stability
8 super-strong, reinforced grab handles
4 stainless steel D-rings
1 high-pressure HR valve for quick inflate/deflate
Technical Specifications:
Recommended pressure - 10 PSI
Folded Size - 30" x 17" x 8"
Weight - 65lbs
In the Box:
Rec mesh dock
Pump with gauge
Duffle-style carry bag
Repair kit
|
788.33 |
|
|
150 Ampere Common Busbar 20 x 8-32 Screw Terminal with Cover
PN: 2312
Stud design provides direct terminal to bus contact for low resistant connection
Stainless steel studs and screws allow high torquing for excellent electrical contact
Tin-plated copper bus for maximum conductivity and resistance to corrosion
UL 94-VO rated (self extinguishing) base material resists high heat
Press on insulating cover attaches to studs and allows unobstructed wire access
Raised bus provides easy access to multiple wires on a single screw
Continuous Amperage
130 Amperes AC
150 Amperes DC
Maximum Voltage Rating
300 Volts AC
48 Volts DC
Bus Material
Tin-Plated Copper CDA 110/UNS11000
Base Material
Glass Reinforced Polycarbonate
Cover Material
Polycarbonate
Studs
Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal
Screws
Stainless steel, #8-32 screw terminal, torque 18 in-lbs, accepts #8 (M4) ring terminal
Weight
0.58Lb
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
28.73 |
|
|
M-Series 10" Cradle Mount - White
This cradle mount is specifically designed to be used with our M-Series LED light bars. It is made right here in the USA out of high quality stainless steel, coated for corrosion resistance, and powder-coated white to match RIGID Industries marine lighting components.
Features:
Includes All Necessary Hardware
Limited Lifetime Warranty
Made in the USA
|
29.83 |
|
|
Oberdorfer 11722 "M" Bracket (10562-5/8)
|
382.72 |
|
|
3 Blade aluminum propeller for 9.9-25 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case.
|
79.99 |
|
|
3 Blade aluminum propeller for 9.9-25 horsepower engines with 10 tooth spline and thru hub exhaust. 3" gear case.
|
79.99 |
|