|
A-Series Buoy - 11" x 15" Diameter - A-1 - Grey
The A Series is the product that launched the Polyform story. This all-purpose buoy, with the signature "blue ropehold" has proven itself in the most adverse conditions. Making gear used in heavy seas is no easy task. That's why more fishermen use Polyform A Series than all other buoys combined. You name it — ocean, sea, river, or lake — and the A Series has been there. Put your trust in Polyform's most versatile and well-known product.
Features:
Even wall thickness for maximum strength and durability
Polyform's unique vinyl valve system
Redesigned rope hold for A-1 through A-7 for improved strength and durability
Dual valve inflation/deflation system for sizes A-5, A-6, and A-7
Excellent choice for a rafting fender
Offered in a wide range of brilliant, high-visibility colors
Specifications:
Diameter: 11" x 15"
Fender Eye Diameter: 1"
Recommended Line Diameter: 1/2"
*Note Polyform does not recommend using a spliced fender line for our HTM boat fenders, in general, we recommend a 1/2" diameter line without a splice for our hole through the middle fenders.
|
48.31 |
|
|
11" x 15" Flush Hatch White - ASA Material - Acrylonitrile Styrene Acrylate
Features:
1/2” Closed Height
Weather-tight Seal
Opens full 180 degrees
Nothing to Snag Lines
One-Hand Operation
Mounts Vertical or Horizontal
UV Stabilized Material
Invisible Fasteners
Color: White
Non-Skid Diamond Pattern Surface
|
125.68 |
|
|
3 Blade stainless propeller for 40, 50HP Johnson 4-stroke and 35-65 horsepower Suzuki. All with 13 tooth spline and thru hub exhaust. 3-1/4" gear case.
|
249.99 |
|
|
A-1 Buoy 11" Diameter - Red
The A-Series is the product that launched the Polyform story. This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions.
Marking gear used in heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined. You name it, ocean, sea, or river, and the A-Series has been there.
Put your trust in Polyform's most versatile and well-known product.
Features:
Even wall thickness for maximum thickness
Heavy duty reinforced ropeholds
Polyform's unique vinyl valve system
Dual valve inflation/deflation system
Excellent choice for a rafting fender
One (1) piece design
Technical Specifications:
Size - 11" x 15" (27.9 x 38.1cm)
Eye Diameter - 1" (2.5cm)
Circumference - 34.6" (87.8cm)
Volume - 3.5 gallons (13.2L)
Boat Size - 15 - 30 (4.6 - 9.1M)
*Sold as an Individual
|
46.01 |
|
|
F-6 Twin Eye Fender 11" x 42" - Black
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 42" (27.9 x 106.7cm)
Eye Diameter - 1" (2.54cm)
Circumference - 34.6" (87.8cm)
Volume - 15.1 gallons (57.2L)
Boat Size - 35' - 50' (18.29 - 21.34M)
Weight - 10.15lbs
*Sold as an Individual
|
179.69 |
|
|
BP-11 Poly Basket - 3.1 x 15.4"
Replacement Poly Baskets are made of corrosion-resistant polyethylene and have an improved handle design for easier use. Designed to fit a range of pipe sizes, these spare poly baskets measure between 5.2 and 18.3 inches in length, and from 1.9 to 3.1 inches in diameter.
Fits:
ARG-2500
SA-2500
932-2500
|
65.33 |
|
|
BS-11 Stainless Steel Basket - 3.1" x 15.4"
GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design.
Fits:
ARG-2500
SA-2500
932-2500
|
73.33 |
|
|
On-Board Precision Charger MK-345 PCL 3 Bank x 15 AMP LI Optimized Charger
Longer run times. Shorter charge times. That's the precision difference that keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12-volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by the bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby.
Features:
Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge
Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge
Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what
Battery Equalization: Cleans and protects your battery (flooded lead-acid only) every time you plugin. Also activates a more rigorous, complete cleaning at the push of a button
Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12-volt lithium (LiFePO4) batteries from standby automatically.
LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications, and full charge
Automatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe, and precise charge
Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant
3-Year Warranty: All battery chargers come with a full 3-year replacement warranty
Specifications:
Product Dimensions: 9.25 in x 11 in x 3 in
Product Weight: 14.5 lb
Charger Style: On-Board
Output per Bank: 15 amps
Wattage: 700W
Charge Time: 3-5 hours
Power Source: On-Shore AC
Battery Type: 12v Lithium LiFePO4, 12v AGM, 12v Flooded Lead Acid
12v Lithium-Ion (LiFePO4) Optimized: Yes
Waterproof: Yes
Digital Control: Yes
Automatic Temperature Compensation: Yes
Battery Equalization: Yes
Battery Type Selection: Yes
LED Display: Yes
Saltwater Compatible: Yes
Battery Connection: Ring Terminal
Warranty: 3-Year Warranty
|
350.99 |
|
|
G-6 Twin Eye Fender 11" x 30" - Black with Adapter
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 30" (27.9 x 76.2cm)
Eye Diameter - .875" (2.2cm)
Circumference - 34.6" (87.8cm)
Volume - 8.5 gallons (32.2L)
Boat Size - 35' - 40' (10.7 - 12.2M)
Weight - 6.7lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
88.31 |
|
|
G-6 Twin Eye Fender 11" x 30" - Blue with Adapter
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 30" (27.9 x 76.2cm)
Eye Diameter - .875" (2.2cm)
Circumference - 34.6" (87.8cm)
Volume - 8.5 gallons (32.2L)
Boat Size - 35' - 40' (10.7 - 12.2M)
Weight - 6.7lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
88.31 |
|
|
G-6 Twin Eye Fender 11" x 30" - Black
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 30" (27.9 x 76.2cm)
Eye Diameter - .875" (2.2cm)
Circumference - 34.6" (87.8cm)
Volume - 8.5 gallons (32.2L)
Boat Size - 35' - 40' (10.7 - 12.2M)
Weight - 6.7lbs
*Sold as an Individual
|
87.76 |
|
|
G-6 Twin Eye Fender 11" x 30" - Blue
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 11" x 30" (27.9 x 76.2cm)
Eye Diameter - .875" (2.2cm)
Circumference - 34.6" (87.8cm)
Volume - 8.5 gallons (32.2L)
Boat Size - 35' - 40' (10.7 - 12.2M)
Weight - 6.7lbs
*Sold as an Individual
|
87.76 |
|
|
On-Board Precision Charger MK-460 PCL 4 Bank x 15 AMP LI Optimized Charger
Longer run times. Shorter charge times. That's the precision difference that keeps anglers on the water longer and puts more fish in the boat. Now, the next generation of this legendary line of chargers has been optimized for 12-volt lithium (LiFePO4) batteries. Precision chargers feature battery-type selection by the bank, which now includes charge curves specially formulated for the high demands of lithium batteries, and can even wake these battery types from standby.
Features:
Battery Type Selection: Each charging bank can be selected to your specific battery type (Lithium (LiFePO4) AGM or flooded lead acid) to guarantee a safe, protected charge
Automatic Temperature Compensation: Precision chargers sense and adjust to ambient temperature fluctuations to ensure a fast, accurate charge
Low-Line Voltage Compensation: When outlets don't put out the 120 volts they are supposed to, Precision Chargers compensate to deliver a fast, consistent charge no matter what
Battery Equalization: Cleans and protects your battery (flooded lead-acid only) every time you plugin. Also activates a more rigorous, complete cleaning at the push of a button
Digital Control: Microprocessor-based design delivers a faster, more precise charge every time. Precision chargers can even wake dead 12-volt lithium (LiFePO4) batteries from standby automatically.
LED Indicator Lights: Inform of charge stage, maintenance mode status, error notifications, and full charge
Automatic Multi-Stage Charging: Controls the voltage and current your battery gets throughout the charging cycle, ensuring a fast, safe and precise charge
Waterproof Construction: All on-board chargers are built to be waterproof, shock-resistant and vibration-resistant
3-Year Warranty: All battery chargers come with a full 3-year replacement warranty
Specifications:
Product Dimensions: 9.5 in x 3 in x 14.5 in
Product Weight: 18.5 lb
Charger Style: On-Board
Output per Bank: 15 amps
Wattage: 900W
Charge Time: 3-5 hours
Power Source: On-Shore AC
Battery Type: 12v Lithium LiFePO4, 12v AGM, 12v Flooded Lead Acid
12v Lithium-Ion (LiFePO4) Optimized: Yes
Waterproof: Yes
Digital Control: Yes
Automatic Temperature Compensation: Yes
Battery Equalization: Yes
Battery Type Selection: Yes
LED Display: Yes
Saltwater Compatible: Yes
Battery Connection: Ring Terminal
Warranty: Three-Year Warranty
|
421.19 |
|
|
Hustler® - Right Hand - Aluminum Propeller - LE-1515- 3-Blade - 15.25" x 15 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
98.41 |
|
|
Hustler® - Right Hand - Aluminum Propeller - LE-1515- 4-Blade - 15" x 15 Pitch
The Prop that put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.
These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.
The Hustler 4 blade series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older aluminum designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
110.57 |
|