|
Standard 9" x 12" Single - 12 Gauge Replacement Blade
Gauge:12
Anode: No
Back Plate: No
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
109.91 |
|
|
Edgemount 9" x 12" Single - 12 Gauge Replacement Blade
Gauge:12
Anode: No
Back Plate: No
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
117.58 |
|
|
9" x 12" Standard Trim Tab Kit w/Standard Integrated Switch Kit- 12V
Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
Kit includes:
Self-contained sealed keypad
Control box
36" Pigtail
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Standard Tactile
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
782.92 |
|
|
9" x 12" Standard Trim Tab Kit w/LED Integrated Switch Kit- 12V
Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
Kit includes:
Self-contained sealed keypad
Control box
36" Pigtail
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: LED Indicator
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
925.24 |
|
|
9" x 12" Edge Mount Trim Tab Kit without Switch Kit -12V
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads & Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
621.73 |
|
|
9" x 12" Standard Trim Tab Kit w/Double Rocker Switch - 12V
Lenco Electric Complete Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Standard Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Lenco Trim Tab Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
Kit includes:
Self-contained sealed keypad
Control box
36" Pigtail
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Double Rocker
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
668.16 |
|
|
9" x 12" Standard Mount Trim Tab Kit without Switch Kit- 12V
Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Hinge Height: 2"
Minimum Transom Height: 14"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
579.13 |
|
|
Edge Mount Trim Tab Kit w/Standard Tactile Switch Kit
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Suggested Boat Length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Kit Contents
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads & Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner's / installation manual
All necessary stainless steel mounting hardware
Specifications:
Blades: 12 Gauge Stainless Steel
Finish:Smooth
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Standard Tactile Switch Kit
With Built-In Retractor For Single Actuator Systems / 12-Volt
Lenco Trim Tab Standard Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. The standard tactile switch is built to all the same exacting standards as the indicator switches.
Kit Contents
Key Pad
Control Box
36" Power Pigtail
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
825.52 |
|
|
Edge Mount Trim Tab Kit w/LED Indicator Switch Kit
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Suggested Boat Length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Kit Contents
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads & Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner's / installation manual
All necessary stainless steel mounting hardware
Specifications:
Blades: 12 Gauge Stainless Steel
Finish:Smooth
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
LED Indicator Switch Kit
With Built-In Retractor & Self-Check Features For Single Actuator Systems / 12 & 24-Volt
Lenco Waterproof Trim Tab Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.
The standard tactile switch is built to all the same exacting standards as the indicator switches.
Kit Contents
Self-contained sealed Key Pad
Control box
36" Power Pigtail.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
967.84 |
|
|
LPG (Propane) Low Pressure Valve for 9" x 12" Grills
This low pressure control valve is designed to convert your Magma grill from a Type 1 control valve/regulator and 1-lb propane fuel canister to any pre-regulated, low pressure, on-board LPG (propane) system.
Stainless steel and brass control valve connects to the systems low pressure side of the regulator.
*Must be used with Magma Connection Kit
Compatible With:
Magma 9" x 12" Rectangular grills
*Sold as an Individual
|
33.76 |
|
|
Padded Grill and Accessory Carrying/Storage Case for 9" x 12" Grills
Conveniently store and transport your grill and accessories in Magma's luggage quality Padded Storage and Carrying Case that is designed to store all of your grilling gear in one space saving location.
This case is outfitted with a large storage compartment, to fit Magma and most rectangular grills with a 9”x12” grilling surface, and a separate internal pocket for storing a serving shelf and/or grilling utensils. The external storage compartment is large enough for carrying up to (3) 1lb. propane canisters and includes an internal mesh pocket for storing the grill’s control valve/regulator, LED grill light, and other small accessories.
Constructed from heavy duty polyester nylon, this case has thick internal padding for maximum protection, reinforced stitching, heavy duty zippers, convenient carrying handles, and shoulder strap. With the same quality and craftsmanship you've come to expect, this is a must have addition for every grilling enthusiast.
Once again Magma has just what you've been looking for.
Compatible With:
Magma Rectangular Grills with a 9” x 12” Grilling Surface
Features:
100% Heavy Duty Polyester Nylon Construction with Thick Padding for Maximum Protection
Heavy Duty Carrying Handles and Shoulder Strap
Reinforced Stitching and Heavy Duty Zipper
Large Main Compartment for Grill
Main Compartments Internal Pocket Stores Serving Shelf and/or Grilling Utensils
Large External Compartment Stores up to (3) Disposable 1-lb. Fuel Canisters
External Compartment Includes Internal Mesh Pocket for Storing Control/Valve Regulator, LED Grill Light, and Other Small Accessories
*Sold as an Individual
|
65.99 |
|
|
9" x 12" Electro-Polished Standard Trim Tab Kit
12 Volt
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades areconstructed of 12-gauge 304 Electro-Polished stainless steel with a 5/8" flared trailing edge & 1/8" diameter stainless steel hinge pin.
Kits include:
(2) 12-gauge stainless steel Electro-Polished blades
(2) 15054-001 actuator with 6' leads and Deutsch connectors
(2) 30133-103 20' actuator extension wiring harnesses
(2) 15085-001 upper mounting brackets with gland seal
(2) 50014-001 lower mounting brackets
Lenco owner's/installation manual
Stainless steel mounting hardware
Specifications:
Boat Length:16' - 25'
L" x W":9" x 12"
Hinge Height:2"
Minimun Transom Height:14"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
609.90 |
|
|
Rectangular Grill Cover - 9" x 12" - Jet Black
These grill covers are designed specifically to fit any Magma rectangular grill with a 9” X 12” grilling surface and are available in boating’s most popular colors.
Constructed from breathable solution-dyed acrylic fabric that is water and fade-resistant. The material is guaranteed with a 5-year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals. The convenient drawstring and cam-lock assembly keep it secured while underway or in windy conditions.
Compatible With:
Magma rectangular grill with a 9” X 12” grilling surface
*Sold as an Individual
|
47.26 |
|
|
Rectangular Grill Cover - 9" x 12" - Pacific Blue
These grill covers are designed specifically to fit any Magma rectangular grill with a 9” X 12” grilling surface and are available in boating’s most popular colors.
Constructed from breathable solution-dyed acrylic fabric that is water and fade-resistant. The material is guaranteed with a 5-year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals. The convenient drawstring and cam-lock assembly keep it secured while underway or in windy conditions.
Compatible With:
Magma rectangular grill with a 9” X 12” grilling surface
*Sold as an Individual
|
47.26 |
|
|
9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V
Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades
Kit Contents:
2 each of 12-gauge stainless steel Electro-Polished trim tab blades
2 each of #15054-001 actuators with 6' lead and Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (#116) upper mounting bracket with gland seal
2 each of #50014-001 (#119) lower mounting bracket
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 26'
Length of Tab: 9"
Width of Tab: 12"
Minimum Transom Height: 13.5"
Blades: 12 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
690.76 |
|