|
JABSCO 30180-0003 Pump 1 1/2" Ports 23 GPM 115VAC
Body: Bronze
Impeller: Nitrile
Shaft: 316 Stainless Steel Impeller Sleeve Over Motor Shaft
Shaft Seal: Lip Type
Motor: 1/3 HP Capacitor type 115v with 8" cord
Built In Dry Running Capability (up to 30 minutes) After Initial Priming
MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.
INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Hydro-static Pressure Testing; Sump Pumping.
FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.
HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and Gardens; Remove Water from Low Areas; Recharge Water Softeners.
PLUMBING: Empty Clogged Drains, Empty Sumps, Sinks and Tubs; Pump Out Water Closets.
FARM: Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.
<
CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.
|
512.38 |
|
|
Jabsco 18940-0010 Engine Cooling Pump 1 1/4" Ports
Pump Body: Bronze
Port Size: 1 1/4" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Pulley: 6 1/2" diameter "A" belt
This Jabsco alternator mounted engine driven water pump has been used on a wide range of engines including Chrysler, Lehman, and Powerhouse Marine. Engineered for marine applications and a long service life, the body is cast bronze and features a stainless steel shaft. Impeller access is available by removing the front portion of the pump body. Hose barbs are cast into the pump body so that tail pieces are not required for installation. Pump is driven by a 6 1/2" pulley that is compatible with type A belts.
Key Features
Flange mounted engine driven flexible impeller water pump
Self-priming at slow RPMs
Includes 6 1/2" pulley compatible with type A belts
Corrosion resistant bronze pump body
Stainless steel shaft for superior corrosion resistance
Compatible engines
Chrysler: replaces Sherwood model G5
LM 318
LM 340
LM 360
LM 383
LM 400
LM 440
Lehman 302, 351 cu. in.
Powerhouse Marine 302, 351 cu. in.
|
1103.84 |
|
|
Jabsco 18330-0000 Electric Clutch Pump 12V with 2" Ports
This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.
Pump Body: Bronze
Port Size: 2" NPT
Flow: 83 GPM at 10 feet of Head, 1750 RPM
Impeller: Nitrile
Shaft Seal: Mechanical, Carbon-Ceramic
Shaft: Brass
Pulley: 7" Diameter
Used for
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine, brine.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
18330-0000 is Jabsco Electric Clutch Pump 12V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco 18330 Series Electric Clutch Pump
FEATURES
Pump Body:
Bronze
Port Size:
2" NPT
Flow:
83 GPM at 10 feet of Head, 1750 RPM
Impeller:
Nitrile
Shaft Seal:
Mechanical, Carbon-Ceramic
Shaft:
Brass
Pulley:
7" Diameter
APPLICATIONS
SELF PRIMING PEDESTAL MOUNT ELECTRIC CLUTCH PUMP
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals,pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine. brine. etc.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations and emergency pumping.
18330-0001 is Jabsco Electric Clutch Pump 24V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco Pump 11870-0011 with 12V Clutch
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. This version is specific to those great ice resurfacing machines seen at all hockey games.
Electric: 12V
Ports: 1 1/4"
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
|
2202.68 |
|
|
Jabsco 30812-0012 Pump 12V 3Gpm 60Psi
|
135.46 |
|
|
Jabsco Pump 12V 1B Clutch
FEATURES
Pump Body:
Bronze
Port Size:
11860-Series, 1" NPT Internal
11870-Series, 1-1/4" NPT Internal
Electric:
12V, 24V or 32V
Pulley:
Single B groove or Double A groove
Impeller:
Nitrile
Shaft Seal:
Mechanical Carbon-Ceramic, Face Type
Shaft:
Stainless Steel
Bearings:
Shielded Ball Bearings
APPLICATIONS / CHARACTERISTICS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump.
INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco- Electric Clutch Pump 12V, 1" NPT Ports, 1 Groove "B" Belt Pulley
|
896.28 |
|
|
Jabsco 3255-0000, 2/3 Cam
Jabsco Raw Water Pump Cam fits many Jabsco pumps
|
81.85 |
|
|
Jabsco 490-0001, Brass Cam
Jabsco Raw Water Pump Cam fits many Jabsco pumps
|
44.89 |
|
|
Jabsco 11818-0003 Pump Head Only
Use this pump head as a replacement for your 11810 series pump.
|
434.23 |
|
|
Jabsco 50080 50200 Series Clutch Pump
Pump Body:
Bronze
Port Size:
50080 Series: 1" BSP
50200-2011 Series: 1 1/2" BSP
Flow:
50080 Series: Nominal 80 Liters/min (17.8 gallons/min) at 1500rpm
50200-2011 Series: Nominal 200 Litres/min (44.5 gallons/min) at 1500rpm
Impeller:
Neoprene or Nitrile
Shaft Seal:
50080 Series: Lip Type
50200-2011 Series: Mechanical Carbon/Ceramic
Shaft:
316 Stainless Steel
Pulley:
Anodized Aluminum. 178mm (7") 'A' or 'B' section.
APPLICATIONS
Electric Clutch Pedestal Mount Pump. British Standard Pipe Threads.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).
Jabsco Clutch Pump 50200-2011, 1-1/2" British Standard Pipe Threads, Neoprene Impeller, 12V, 2 Groove "A" Belt Pulley
|
1495.39 |
|
|
Jabsco 30642-1000 90 Degree 3/4" Port
|
6.18 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Jabsco 18830-0000 Pump For Chris Craft -
FEATURES
Pump Body:
Bronze
Port Size:
1" ID Hose
Impeller:
Neoprene
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
Stainless Steel
Pulley:
6 1/2" diameter "A" belt (on some versions)
APPLICATIONS / CHARACTERISTICS
Marine Engine Cooling.
Jabsco Engine Cooling Pump For Chris Craft 305 327 350 CID
|
771.84 |
|
|
Jabsco 18400-0050 Pump Bronze 3/4" Sp
FEATURES
Pump Body:
Bronze, Flange Mount
Port Size:
3/4" NPT
Flow:
Nominal 22 Litres/min (5.8 US gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Lip Type
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Marine Engine Cooling. Onan MDJ-C MDJ-F
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain.
Jabsco Engine Cooling Pump 3/4"NPT Onan 132-0147 MDJF 15KW
|
744.47 |
|