 |
Flotec FP217-811 Control Box for 3/4HP Pumps
For use with Flotec Submersible Sump Pump, Model FP3222
Controls the start and run functions
|
144.69 |
|
 |
Flotec FP003415S Brush Kit For F360AC
Flotec Brush Kit for Flotec FP0F360AC Cyclone Pump and Simer M-40, M40 Pump. Fits Pumps with Square Front Covers Only.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
52.92 |
|
 |
Roper Pump 3622GHBFORV 3" Gear Pump Bronze Bearings Rv
ships via Truck
|
2386.80 |
|
 |
Flotec FP3492-01 Control Box
|
234.78 |
|
 |
Flotec FP0012-6U Discharge Hose
SUMP PUMP DISCHARGE HOSE
Flotec- Discharge Hose 1-1/4” x 24' with Cuff and Clamp.
This was part # FP150-24
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
20.30 |
|
| |
Flotec FP217-810 Control Box for 1/2HP Pumps
|
140.14 |
|
 |
Flotec FPP4322-08 Overhaul Kit
Use with pump model FP4322 convertible jet pump
Includes impeller, diffuser, and all seals and gaskets to overhaul pump
Restores like-new performance
|
103.74 |
|
 |
Flotec N101-30P Diffuser Assy, 3/4Hp
|
30.24 |
|
 |
Flotec FP4122 Well Pump 3/4Hp 115/230V
Flotec Shallow Well Jet Pump, Cast Iron Construction, 3/4HP 115/230V, 1-1/4”NPT Suction x 1” NPT Discharge Ports, up to 14.4GPM at 40psi, Pressure Switch Set to 30psi On / 50psi Off, up to 25 Foot Water Depth
|
720.00 |
|
 |
Flotec FP0020 Float Switch
Flotec Replacement Float Switch Only for Pedestal Sump Pumps, Internally Mounted in the Motor
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
46.31 |
|
 |
Flotec FP2112 Submersible Well Pump 4"
Flotec Submersible Well Pump, for 5" or Larger Wells, Stainless Steel Pump and Motor Housing, 7GPM Series, 2 Wire, 1/2HP 230V, 1-1/4”NPT Port, Water Filled Submersible Motor, Built-in Check Valve, No Control Box Required
|
512.29 |
|
 |
FPP1520 Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4012-08 Only.
Includes Seal and Gasket Kit, Impeller, Seal Plate Insert, and Diffuser
This Kit Does Not Fit The FP4012-10 Pump.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
69.16 |
|
 |
FP4022 Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4022-08 Only.
Includes Seal and Gasket Kit, Impeller, Seal Plate Insert, and Diffuser.
This Kit Does Not Fit The FP4022-10 Pump.
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
69.16 |
|
| |
Flotec FP4012-10MK Overhaul Kit
Flotec- Overhaul Kit for Flotec FP4012-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring.
This Kit Does Not Fit The FP4012-08 Pump. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
196.09 |
|
| |
Flotec FP401215H-10MK Overhaul Kit
Flotec- Overhaul Kit for Flotec FP401215H-10, Includes Seal Plate, Seal Plate O-Ring, Seal, Impeller, Priming Baffle, Nozzle/Diffuser Assembly, Nozzle O-Ring.
This Kit Does Not Fit The FP401215H-08 Pump. Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same.
|
196.09 |
|
