|
Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.85 gpm / 10.8 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pumps 2SF22ES Direct Drive Plunger Pump
Pump Features:
• UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
• Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
• Ultimate portability, less than 11 pounds, less than 10" long
• Regulating unloader is standard on each pump to assure system pressure control and pump protection
Specifications:
• Triplex plunger pump
• Direct drive with electric flange
• Maximum volume: 2.0 GPM
• Maximum discharge pressure: 1200 PSI
• Maximum inlet pressure: 75 PSI
• Maximum pump speed: 3450 RPM
• Minimum horsepower requirements: 1.6 BHP
• Bore: .708" (18mm)
• Stroke: .122" (3.1mm)
• Crankcase capacity: 11 oz. use CAT pump hydraulic oil
• Inlet port: 3/8" FPT
• Discharge ports: Dual 3/8" FPT
• By-pass port: 1/4" FPT
• Dimensions: 9.13" x 6.65" x 6.50"
|
606.00 |
|
|
|
18.00 |
|
|
Cat Pumps Kit O'ring Buna 31708
|
19.75 |
|
|
Cat Pumps Crankcase Oil 2.5 Gallons
Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6105-2.5 contains 1 2.5 gallon container.
|
101.83 |
|
|
Cat Pump 2SF10ES Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.
Technical Specifications
Max Flow: 1 gpm / 3.8 lpm
Max Pressure: 2000
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(M)
RPM: 3450
Drive Type(s): Direct
Material: Brass
|
606.00 |
|
|
Cat Pump 1K303 Submersible Pumps
1K Series – Submersible Sump Pumps Stainless steel submersible sump pumps offer solutions to pumping semi-dirty water or fresh water with suspended solids up to 3/8".
Flow Range Up to 88 gpm Pressure Range (up to 24 PSI) 55 ft. Head RPM 3450 rpm Discharge Fitting 1-1/4", 1-1/2" NPT(F) Horsepower 1/3, 1/2, 3/4, 1, 1-1/2 HP Operation Manual or Automatic Maximum Temperature Continuous 122°F Intermittent 140°F Maximum Solids Diameter 3/8"
|
1267.20 |
|
|
Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump Kit Seal Blue Dot Nbr
|
49.59 |
|
|
Cat Pump Kit Valve Dm Nbr W/S Valves
|
69.72 |
|
|
Cat Pump Kit Valve Qvm Fld Nbr
|
207.87 |
|
|
Cat Pump Kit Fill & Gauge
Large T Valve Opens to allow precharges reading. Gas regulator valve opens to allow increase in precharge( to 50% of system pressure for 6000 series)(70% for 7000 series). Small T valve bleeds off pressure in gauging assembly before removing from accumulator.
30940 includes Pressure Gauge 6099
Max PSI 3500
Gauge to Accumulator Connection (NPT) 1/8"
Hose Length 96"
30940 used with Prrrrr-O Lators 6010-6015, 6029-6031
|
475.56 |
|
|
|
529.75 |
|
|
Cat Pump 2SF22ELS DIRECT DRIVE PLUNGER PUMP
This is a Cat Pump triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a Brass manifolds, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o'rings. This is a hollow-shafted pump designed to bolt directly to a c-face electric motor, providing easy, compact installation.
Technical Specifications
Max Flow: 2.2
Min Pressure: 100
Max Pressure: 2000
Inlet Port Size: 3/8"NPT(F)
Discharge Port Size: 3/8"NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: Brass (BB)
|
615.75 |
|
|
Cat Pump 31770 Kit,Seal Nbr B 1540,1540E
|
301.67 |
|