|
BURKS 350G6-1 1/2, Centrifugal Pump 230/460v 3PH 5HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet. Impeller Diameter is 5.88 Inches.
UNSPSC Code: 40150000
|
3253.35 |
|
|
BURKS 350CS9M-FE, TURBINE PUMP 230/460v 3PH 5HP
Turbine Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
OEM version with FE Franklin Electric Motor.
|
4474.65 |
|
|
BURKS 320CS6M, TURBINE PUMP 230/460V 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us
|
3085.16 |
|
|
BURKS 320CS7M, TURBINE PUMP 230/460v 3PH 2HP
All BRONZE Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us
|
3085.16 |
|
|
BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP
BURKS Model: GNB6-1-1/2-6.25
Burks Frame Mounted End Suction GNB Series Pump
Bronze Fitted, 6.25" Bronze Impeller
2" Suction & 1 1/2" Discharge
Carbon / Ceramic / SS Buna-N Shaft Seal
Maximum Temperature of 225°F (107°C)
Application: Waste Treatment and Plating
Ships Via Truck please us the Contact Us page to get a Freight Quote.
|
3273.19 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1242.90 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1054.80 |
|
|
Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 1 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
57.5 FT
12 M
Power
1 HP
.745 KW
Electrical
1Ph 115/230V or 3Ph 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof
|
3654.41 |
|
|
BURKS 315CS6M TURBINE PUMP 230/460 Volts 1.5HP
All BRONZE Construction.
Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
Self-Priming Pump
Compact and Space-saving size
No coupling so this eliminates misalignment problems
Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C).
Bronze impeller with Monel blades – therefore the only moving part
Bronze raceway with cast-in vortex pockets – will not vapor lock
#303 Stainless Steel pump shaft
Easy to service as a result
Especially relevant, Every pump factory tested
Motor Information
4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.
CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.
High Temperature
For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications.
For High Temp Models please use the Contact Us page, also use the Contact Us page for a Shipping Quote.
|
2882.48 |
|
|
Laing SM-909-NT-14, Mag-Drive Centrifugal Pump
Laing Mag-Drive Centrifugal Pump Plastic, 7GPM at 4' Head, 14' Head Max, 230V 60HZ 1/50HP 65Watts, 3/4”MNPT Ports
|
205.92 |
|
|
BURKS 350CS8M, TURBINE PUMP 230/460v 5HP 3PH
Bronze Fitted Cast Iron Construction.
Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
4474.65 |
|
|
March 0155-0174-1000 Motor 3Ph 1Hp 230/460V Tefc
|
725.00 |
|
|
BURKS 09812F, MOTOR 3PH 3HP ODP CS
|
2064.48 |
|
|
BURKS 37CT7M, Turbine Pump 3PH 3/4HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
Turbine Pump and Motor unit.
UNSPSC Code: 40150000
|
2010.60 |
|
|
March 0155-0022-1000 Motor Only
Totally Enclosed Fan Cooled Electric Motor 3Ph 208/230/460V 50/60HZ 3/4HP 56Fr for all March 7 Series Pumps
|
645.00 |
|