BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.

BURKS 320CS6M, TURBINE PUMP 230/460V 3PH 2HP Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.   Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us

BURKS 320CS7M, TURBINE PUMP 230/460v 3PH 2HP All BRONZE Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.   Please Contact us for a shipping quote http://www.clrmarine.com/Contact_Us

BURKS 350CS9M-FE, TURBINE PUMP 230/460v 3PH 5HP Turbine Pump and Motor unit. Bronze Fitted Cast Iron Construction.  Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet. OEM version with FE Franklin Electric Motor.

BURKS 09812F, MOTOR 3PH 3HP ODP CS

BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP Bronze Fitted Cast Iron Construction.   Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches

BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4 Inches.   UNSPSC Code: 40150000

BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.81 Inches.   UNSPSC Code: 40150000

BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP BURKS Model: GNB6-1-1/2-6.25 Burks Frame Mounted End Suction GNB Series Pump Bronze Fitted, 6.25" Bronze Impeller 2" Suction & 1 1/2" Discharge Carbon / Ceramic / SS Buna-N Shaft Seal Maximum Temperature of 225°F (107°C) Application: Waste Treatment and Plating   Ships Via Truck please us the Contact Us page to get a Freight Quote.

BURKS 315G5-1 1/4, Centrifugal Pump 3PH 1 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.75 Inches.

BURKS 315GA5-1 1/4, Centrifugal Pump 230/460v 3PH 1 1/2HP BF All BRONZE Construction. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.56 Inches.

BURKS 35G5-1 1/4, Centrifugal Pump 3PH 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.63 Inches.   UNSPSC Code: 40150000  

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us

BURKS 35GA5-1 1/4, CENT PUMP 3PH 1/2HP 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.44 Inches.   UNSPSC Code: 40150000

Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.   March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 53 GPM 180 LPM Max Head 60 FT 12.3 M Power .75 HP .559 KW Electrical 1PH 115/230V or 3PH 230/460V 50/60HZ     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing) Motor Options Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof