GMR™ 2534 xHD3 4' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 28.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 2536 xHD3 6' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 30.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 434 xHD3 4' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor  New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1234 xHD3 4' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1236 xHD3 6' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 436 xHD3 6' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 54 - 4' Open Array Radar High-powered Open-Array Radar 4’, 50W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles. High-power 50W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install and Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 54 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 124 - 4' Open Array Radar Open-array Radar with Industry-leading 120 W Solid-state Output Power Features: 4’, 120 W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings Featuring 120W of power, GMR Fantom 126 is our most powerful 6’ solid-state radar. It uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 96 nautical miles. High-power 120W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 96 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install & Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box: GMR Fantom 126 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 56 - 6' Open Array Radar High-powered Open-Array Radar 6’, 50W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles. High-power 50W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install and Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 56 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR Fantom™ 126 - 6' Open Array Radar  Open-array Radar with Industry-leading 120 W Solid-state Output Power Features: 6’, 120W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings Featuring 120W of power, GMR Fantom 126 is our most powerful 6’ solid-state radar. It uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 96 nautical miles. High-power 120W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 96 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install & Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 126 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GMR 18 xHD3 18" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 18" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 18 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" x 9.8" (508 mm x 248 mm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GMR 24 xHD3 24" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 24" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 24 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 25.4" x 9.8" (64.5 cm x 24.9 cm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 3.7° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

DRS25AX 25kW UHD Digital Radar with Pedestal, 15M Cable & 4' Open Array 25kW UHD Digital Radar for TZtouch, TZtouch2 and TZtouch3. DRS25AX "X-Class", a whole new class of Radar! Pushing the boundaries of what is possible with conventional Radar technology, DRS25AX "X-Class" marks yet another leap forward for Furuno. Improved in almost all aspects, DRS25AX "X-Class" Radar features improved short range detection, as well as an impressive long range detection of up to 96 nautical miles. The redesigned pedestal unit is 20% lighter than previous models and features an updated motor for significantly lower noise levels. Combined with an updated smart-connector cable, installation and maintenance is simpler than ever before. Fast Target Tracking™ function adopted from our commercial Radar FAR3000, is also available on the DRS25AX "X-Class." Target course and speed vectors are displayed instantly with the press of a button. Target vectors increase situational awareness and can increase overall safety on your vessel. Features: 25kW Power Output Enhanced target detection, both short and long range Minimum detection range of just 20 m Fast Target Tracking™ Bird Mode Pedestal unit 20% lighter than previous unit, updated with new, low noise motor No PSU required, decreasing total costs Easy installation without the need to open pedestal unit Smart-connector cable 4' Open Array 15M Cable Compatible with NavNet TZtouch, NavNet TZtouch2 and TZtouch3 (not compatible with NavNet 3D or earlier NavNet models) The DRS25AX is a 24V system; a converter will be required for use with 12V power systems This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

APT6002 Aluminum PowerTower® Open Array Radar Mount - 6" Aft Leaning Scanstrut Aluminium PowerTower® has been designed and engineered to install your Open Array on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  Compatible with: Garmin - GMR Fantom 254, 256, 54, 4, 6 radars Humminbird - RH 44 radar JRC - JMA 2343 / 5104 (Radome: NKE-2042) radar Koden - 12kW [RB717A], 25kW [RB717A], 4kW [ RB716A], 6kW [ RB716A], 6kW [RB717A] radars Lowrance - LRA 4000, 5000 radars Navman - 8000 Series (8084/8120) 4' radars Nobeltec - 4kW / 6kW radars Northstar - M series/8000i (4' and 6') radars Seiwa - SWR-10 (3.5' and 4.5') radars Simrad -GB40 / NX40/45 / NSE8/12, DX64S radars Sitex - MDS -10 (4' and 5'), RADARpc - 3.5 or 4.5 radars Techmarine - T-74.05 and T-74.06 radars Features: Designed to fit the most up to date open array radars from Garmin, Raymarine, Simrad, and Furuno Pre-drilled mounting holes allow the open array to fasten straight to the PowerTower® Constructed from the best marine-grade aluminum Paint finishes comply with our unique 4 step marine paint system Technical Specifications: Radar Type - Open Array Material - Aluminum  Height - 6.9" (158mm) Mounting Type - Aft leaning - 25° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

Direct Mount Adapter Plate for Simrad HALO™ Open Array Radar Seaview's Simrad HALO™ adapter plate is a great solution when replacing an existing Simrad Broadband 3G™, Broadband 4G™, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned above and the Simrad HALO™ open array.