Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH & 12V This is a complete kit (includes a bilge pump) to install a manual bilge pump with a 3/4" I.D. hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.  Kit Includes: Attwood Tsunami Mk2 500 GPH Pump Washer / Non-Return Valve 90-degree Outlet Straight Outlet 3/4" x 5' Pump Hose 3/4" Thru-hull fitting 2-way on/off switch with bezel plate Snap-It hose clamps Wire Kit Installation Kit Easy Installation & Service GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Caution: Bilge pump switches are not external ignition protected

Tsunami Mk2 T500 Aerator - 12V - Straight Inlet Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range. Features: 3-1/2 in. x 3/4 in. thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications: Flow Gallon/Hour: 500

Tsunami Mk2 T500 Aerator - 12V - 3/4" NPT Inlet Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range. Features: 7/8 in. x 3/4 in. seacock Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications: Flow Gallon/Hour: 500

Tsunami Mk2 T500 Aerator - 12V - 90-Degree Inlet Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range. Features: 3-1/2 in. x 3/4 in. thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications: Flow Gallon/Hour: 500

Tsunami Mk2 T500 Aerator Kit This aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged. Kit Includes: Aerator spray head SS wire mesh strainer  Pump Straight outlet fitting  Hose  Two hose clamps Specifications: Pump Model: T500 Flow Gal/HR: 500 Amp Fuse: 3 Outlet Hose Inner Diameter: 3/4” (19mm) Two hose clamps

Aqua Void Automatic 500 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: High-flow impeller design Quick-change motor connection Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Smaller profile than pumps with switches Straight or 90-degree dura port discharge ports with an included check valve Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Clip-in basket Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Automatically monitors the presence of water through low-amp draw impeller spin The common body allows interchangeable motor cartridge replacement to the same or different size For tighter fit in smaller spaces Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow Corrosion-resistant and extended life Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires 100 days of service before critical battery draw down* Automatically monitors the presence of water through low-amp draw impeller spin Ease of installation & maintenance Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)

Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 500 GPH This replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump. Features: 500GPH auto replacement motor for Aqua Void Auto Bilge pumps only Simple, two-handed twist and pull operation to remove and replace the motor cartridge No tools required Specifications: Pump Size: 500 GPH

Replacement Strainer Base Replacement Strainer Base f/Rule Mate Bilge Pumps w/FLow Rate 1500-2000gph WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 500 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 3 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 4 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 1200 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 5 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 1" and 1-1/8" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 800 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 3/4" and 1" *Must be used with appropriate Tsunami outlet

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24V The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump. Easy Installation & Service  GPH (Gallons Per Hour): 1200 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 1" and 1-1/8" *Must be used with appropriate Tsunami outlet

Tsunami Mk2 T800 Aerator - 12V - Straight Inlet Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range. Features: 3-1/2 in. x 3/4 in. thru-hull Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications: Flow Gallon/Hour: 800

Tsunami Mk2 T800 Aerator 12V 3/4" NPT Inlet Keep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range. Features: 7/8 in. x 3/4 in. seacock Flexible installation with both 90 and straight inlets and outlets Full backward compatibility with previous Tsunami models Faster, smarter installation with no sealant or tools is required Specifications: Flow Gallon/Hour: 800