|
13-1/8" x 36" Electric Seat Slide
Perfect for seats 41" to 54" wide, this 13-1/8" X 36" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information.
Features:
Ideal for seats 41" to 54"
Features 5" of travel distance (stroke length)
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
1211.90 |
|
|
13-1/8" x 24" Electric Seat Slide
Perfect for seats and benches 29" to 40" wide, this 13-1/8" X 24" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions. Contact your TACO Sales or Customer Service Representative for more information.
Features:
Ideal for seats 29" to 40"
Features 5" of travel distance (stroke length)
Water-resistant IP66 rating
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight, and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
875.99 |
|
|
13-1/8" x 10" Electric Seat Slide
Perfect for seats 23" to 28" wide, this 13-1/8" X 10" electric seat slide travels up to 5" and can be stopped anywhere between its fully extended and retracted positions.
Features:
Ideal for seats 23" to 28"
Features 5" of travel distance (stroke length)
Water-resistant IP66 rating
Meets H31 testing standards for seat applications
Precision-machined 6000-series aluminum chassis
Rail/Linear Glide systems are self-lubricating, dirt-resistant, quiet, corrosion-free, lightweight and shock resistant
Low profile with secure fit with universal mounting bolt pattern on both pedestal and box applications
Quite an operation ≤ 58dB
Electric actuator
Self-locking at any given position (at rated loads)
No racking in any direction due to precision tolerances in the track/glide system
All electric seat slides and components are acid-etched clear anodized
Made in the USA
3-year limited warranty
Specifications:
12V DC 9 AMP Max current
Max load 3500N
Push and pull force of 1500N
IP66 Rated
Speed 13.5 mm/Sec @ 1500N
|
681.89 |
|
|
11-1/8" x 36" Manual Seat Slide
Designed for helm chairs and benches 41" to 54" wide, this newly designed slide features a travel distance of up to 3-5/8" with five adjustable positions. Its high-strength polymer glides create a smooth, rattle-free design. Quickly and easily adjust seats using the front-mounted activation paddle handle, which is always accessible in all five positions.
Features:
Meets ABYC H31 testing standards
Precision-machined 6000-series aluminum chassis
Double pin positive side lock
High-strength polymer glides provide self-lubricated, rattle-free, smooth operation
Features five adjustable, equally spaced positions with 3-5/8” of travel
Secure fit with universal mounting bolt pattern on box applications
Front activation paddle that slides with the seat for ease of use
Ideal for seats 41" to 54” wide
Ideal seat length/depth is 12" to 14"
Made in the USA
3-year limited warranty
|
662.80 |
|
|
11-1/8" x 24" Manual Seat Slide
This universal, low-profile design provides frictionless operation and is easily adaptable for a multitude of marine applications. Its high-strength polymer glides provide the smooth movement with a durable locking action. It comes with a front-mounted activation lever, which is easily accessible in all five positions when seated.
Features:
Meets ABYC H31 testing standards
Precision-machined 6000-series aluminum chassis
Double pin positive side lock
High-strength polymer glides provide self-lubricated, rattle-free, smooth operation
Features five adjustable, equally spaced positions with 3-5/8” of travel
Secure fit with universal mounting bolt pattern on box applications
Front activation paddle that slides with the seat for ease of use
Ideal for seats 29" to 40” wide
Ideal seat length/depth is 12" to 14"
Made in the USA
3-year limited warranty
|
596.09 |
|
|
ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8"
ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight.
They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate.
Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
An aluminum counter flange and a mosquito screen are available for these hatches.
Features:
External Dimensions - 13 1/8" x 13 1/8"
Cut Out Dimensions - 10 1/4" x 10 1/4"
Number of Handles - 1
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
285.84 |
|
|
A5 - 27-1/2" x 36" - Double Layer - Black
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
96.97 |
|
|
A5 - 27-1/2" x 36" - Double Layer - Navy
The A-Series are double layered making them softer, more durable & reversible.
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.
They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements.
|
96.97 |
|
|
Teak Flag Pole 1-1/4" x 36"
Boaters appreciate teak's traditional beauty because of its intricate grain
patterns and color variations. The high oil content of the wood keeps it
from deteriorating or warping in the harsh marine environment of sun, wind,
and water. Teak's natural oils and Silica (sand) make it impervious to
insects and wood rot. To maintain the lasting beauty of teak, it should be
cleaned using a good teak cleaner and oiled periodically with a quality teak
oil.
Features:
Made from the finest grade A, kiln-dried teakwood
No deteriorating or warping
|
38.35 |
|
|
Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim
|
3440.34 |
|
|
Solid Braid Polyester Cord Hank - 1/8" x 50' - White
Utility Cordage
Features:
Solid braid polyester cord
Mildew and rot resistant
Excellent for many quick tie and flag halyard applications
|
2.33 |
|
|
BURKS 350GA6-2-5 1/8, PUMP AND MOTOR
UNSPSC Code: 40150000
|
3792.41 |
|
|
JABSCO SP1402-06 WOODRUFF KEY 1/8 X 5/8 ST
|
19.66 |
|
|
Cupboard Bolt - 2-1/8" x 1-1/2"
Features:
Chrome Plated Zinc Alloy
Black Polymer Slide and Knob
|
23.90 |
|
|
Stainless Steel Louvered Vent - 9-1/8" x 4-5/8"
Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.
|
16.32 |
|