Rigid Vinyl Flex-Core Rub Rail 2" x 7/8" - Black 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Lightweight Easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Black Length: (feet) 60' Insert: S11-4511 required Drilled and countersunk for #8 screw on 8-inch centers

Rigid Vinyl Flex-Core Rub Rail 2" x 7/8" - Frosty White 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Lightweight Easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty White Length: (feet) 60' Insert: S11-4511 required Drilled and countersunk for #8 screw on 8-inch centers

Rigid Vinyl Flex-Core Rub Rail 1.58" x .635" - Frosty White 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Ideal for boats up to 40 feet long Lightweight, easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty white Length: (feet) 60' Insert: S11-4511 required (sold separately) Drilled and countersunk for #8 screw on 8-inch centers

Large SuproFlex Rub Rail 2.5" x 1" - Black SuproFlex is a lightweight, ultra-flexible rub rail that saves you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s patented Flex Chrome Insert, which can also be customized to any builder’s color preference. SuproFlex Rub Rail is ideal for any boat up to 65’. Add the ultimate coverage to the cap/hull joint of your boat with the SuproFlex Rub Rail. This co-extruded, ultra-flexible vinyl profile features a longer leg for superior hull protection. Available now to boat builders! SuproFlex Rub Rail is lightweight and super flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s Flex Chrome Insert, which can also be customized to any builder’s color preference. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Insert color can be customized to the builder's preference OEM only Made in the USA 5-year limited warranty

Flex Vinyl Rub Rail Kit - Black with Black Insert - 70' - 1-7/8" x 1-1/16" Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.. Features: Black with Black Insert Vinyl Rub Rail Kit 1-7/8" x 1-1/16" 70'

242 Rail Mount Adapter - 7/8"-1" - Black Fits 7/8" and 1" diameter round rail, and 1" square rail. For all Scotty post mount rod holders. Works with No. 241 side/deck mounts (not included). Includes: Stainless Steel Fasteners WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

242 Rail Mount Adapter - 7/8"-1" - White Fits 7/8" and 1" diameter round rail, and 1" square rail. For all Scotty post mount rod holders. Works with No. 241 side/deck mounts (not included). Includes: Stainless Steel Fasteners WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GP1900 SailPod Uncut (Usable Face = 12.5"W x 7.8"H) (31.8cm W x 1 9.8cm H) for 9.5" Wide Guard SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.

PP4900 PowerPod Uncut (Usable Face = 12.5"W x 7.8"H (31.75cm W x 19.8cm H) PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. Structural Rigidity The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong! Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.  Nickel Chrome Plated Stainless Steel NavPod uses all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! Commitment to Quality We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

G-1 Twin Eye Fender 3.5" x 12.8" - Black Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual

Bow Shackle - 5/16" Pin - 1-1/16"L x 7/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

PED4900 PedestalPod Uncut (Usable Face = 12.5"W x 7.8"H) (31.75cm W x 19.8cm H) - Carbon Black PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft. PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor. PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets. NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.

RAM® X-Grip®Wheelchair Leg Rail Mount for 7"-8" Tablets Designed for use with the seat and leg rails on popular wheelchair brands, this kit includes a small RAM® Tough-Claw™ clamp base connected to an 18” RAM® Flex-Rod™ and medium double socket arm. The RAM® Tough-Claw™ can be clamped to 0.625" - 1.5" diameter rails. Attach the included RAM® X-Grip® tablet mount for use with 7”-8” tablets. The spring-loaded RAM® X-Grip®provides a perfect fit for your tablet and can be easily adjusted to the ideal position.  Specifications: Cradle Dimensions: Minimum Width = 2.5" (Minimum Height = 7") Maximum Width = 5.75" (Minimum Height = 4") Depth = 0.875" Overall Length: 26" Ball Size: B Size 1" Rubber Ball Material: Powder Coated Marine Grade Aluminum and High-Strength Composite

G-5 Twin Eye Fender 8.8" x 26.8" - Black with Adapter Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs In the Box: Fender Inflation Adapter  *Sold as a Kit

G-5 Twin Eye Fender 8.8" x 26.8" - Black Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.  Utility boat fenders with Polyform dependability. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1cm) Eye Diameter - .75" (1.9cm) Circumference - 27.7" (70.2cm) Volume - 5.1 gallons (19.3L) Boat Size - 25' - 35' (7.6 - 10.7M) Weight - 4.45lbs *Sold as an Individual