|
6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base Plate
Get the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provide extra security and improved aesthetics.
Small Base Footprint
This mount is the perfect solution for installations where space is limited.
|
360.00 |
|
|
5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space-Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
360.00 |
|
|
12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space-Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
427.20 |
|
|
12" Modular Mount Vertical 8" Round Base Plate - Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
278.40 |
|
|
18" Modular Mount Vertical 8" Round Base Plate - Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
312.00 |
|
|
RAM Mount Strap Mount w/Arm & Round Base
The RAM-B-108U consists of a 1" diameter rubber ball connected at a right angle to a v-shaped base, double socket arm and 2.5" base that contains the universal AMPs hole pattern. The base will accomodate rails from 1.0" to a maximum of 2.1" in diameter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Rail Dimensions:
1.0" to a maximum of 2.1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Included in Kit:
(1) QTY 6" long metal strap
(1) QTY 8" long metal strap
(1) QTY 5.5" rubber strip that supports the metal straps to avoiding scratching or marking of the rail
Mounting Instructions:
To mount the base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108U is an alternative mounting base for Beechcraft airplanes with a "throw over yoke".
Note:
The "U" in the part number reflects product packaged in poly bag.
|
36.26 |
|
|
5" Modular Mount Vertical 8" Round Base Plate - Top Plate Required
This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
Modular Top Plate
A Seaview Modular Top Plate is required to mount a radar, satellite dome, camera or search light, and is sold separately.
Modular Design
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
|
259.20 |
|
|
Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2
The Seaview ADABLANK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.
King Starboard
Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean-looking installation.
|
182.40 |
|
|
Modular Plate to Fit Searchlights & Thermal Cameras on Seaview Mounts Ending in M1 or M2 - Black
The Seaview ADABLANKBLK is a universal modular top plate for mounting a searchlight or thermal camera for Seaview Modular Mounts ending in M1 or M2.
King Starboard
Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The result is a clean-looking installation.
|
201.60 |
|
|
PM5-FMT-8
Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provides extra security and improved aesthetics.
Small Base Fotprint
This mount is the perfect solution for installations where space is limited.
|
374.40 |
|
|
5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round Base
Get the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provides extra security and improved aesthetics.
Small Base Foot Print
This mount is the perfect solution for installations where space is limited.
|
374.40 |
|
|
PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8"
Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.
Extra Security
No visible bolts on the camera mounting plate provides extra security and improved aesthetics.
Small Base Foot Print
This mount is the perfect solution for installations where space is limited.
|
398.40 |
|
|
5.5" Thermal Camera Mount Aft Leaning for M100 & M200 Series
Get the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority.
Features:
5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras
Elevates electronics for optimum performance and allows for flexibility in installation
Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management
Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation
Compatible Units:
FLIR M132
FLIR M232
Specifications:
Orientation: Aft-leaning
Material: Marine-grade aluminum
Finish: Powder coated white
|
360.00 |
|
|
5.5" Thermal Camera Mount for FLIR M300 Series Cameras
Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space Saving Design
The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.
|
379.20 |
|
|
12" Light Post with 2.75" Round Base Plate
Seaview's light posts come in various height options to clear any obstructions as needed. These powder-coated aluminum light posts are 1.25" in diameter with a 2.75" round base plate.
You must then pick a Seaview light bar top. The most common is our LED combination masthead all-round light LTBLED12, but there are many other options to choose from.
|
76.80 |
|