|
SikaForce®-315 Black 25ml Cartridge
SikaForce®-315 is a 2-component polyurethane adhesive with very good adhesion properties. It is specifically designed for bonding small plastic and metal components.
Features:
Good adhesion to a wide variety of substrates
Fast curing
No running or dripping
Usage:
SikaForce®-315 is suitable for bonding small plastic and metal components such as moldings, clips, and rearview mirror tabs.
This product is suitable for experienced professional users only.
Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Applications:
Surface Preparation
Lightly abrade metal and plastic substrates. Clean and de-grease the surfaces before applying adhesive. Additional surface treatment depends on the specific nature of the substrates. The above information is offered for general guidance only. Advice on specific applications will be given on request.
Application
SikaForce®-315 can be dispensed from the dual mini syringes without the need for an applicator gun. In order to achieve a proper mixing, Mixer Tips (provided with product or sold separately) are required.
Extrude adhesive without mixer to equalize the filling levels, attach the mixer and dispose of the first few cm of the bead.
SikaForce®-315 has to be processed between 10 °C and 30 °C (product, ambient, and substrate temperature).
Removal
Uncured SikaForce®-315 may be removed from tools and equipment with Sika® Remover-208 or other suitable solvents. Once cured, the material can only be removed mechanically.
Hands and exposed skin shall be washed immediately using a suitable industrial hand cleaner. Do not use solvents on skin.
|
20.39 |
|
|
Sikaflex® 295 UV - Black - 10oz Tube with Nozzle
Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).
Features:
Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Areas of Application
Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Product Benefits:
Excellent application properties
Resistant to aging and weathering
Suitable for organic glasses
Approved for the OEM market
Wheelmark approved
Surface Preparation:
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application:
Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.
Tooling & Finishing
Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.
Removal
Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.
Overpainting
Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.
|
18.79 |
|
|
Sikaflex® 295 UV - Black - 3oz Tube
Features:
UV resistant – no cracking or chalking
Salt water resistant
Good gap filling properties
Fast tack-free time
Paintable and sandable
Bonds and seals in one step
Non-yellowing
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.47 |
|
|
Sikaflex® 291 LOT - Black - 3oz Tube with Nozzle
Sikaflex®-291 LOT is a 1-component, marine-grade polyurethane elastomeric adhesive, and sealant. It is a moisture-cured, non-sag system designed with a long open time for jobs that require more time.
Features:
Use above and below the waterline
Resists saltwater
Paintable and sandable
Usage:
General all-purpose, high strength marine sealant, which may be used for light-duty bonding with long open time capability for humid climates or jobs requiring more time that remains permanently elastic.
Advantages:
Use above and below the waterline
Resists saltwater
Paintable and sandable
Excellent bond
NSF approved for potable water
USDA approved for incidental food contact
|
10.08 |
|
|
Shurflo 94-315-34, 60 Psi Bypass Valve Kit
|
30.94 |
|
|
SHURflo 94-315-35, 60 Psi Bypass Valve Kit
|
62.62 |
|
|
SeaLand 307231505 Bulkhead Mounting Bracket
SeaLand's 90° Mounting Bracket allows pumps to be installed in tight, spaces or away from standing water. Holes are pre-drilled for SeaLand T-Series and S-Series pumps. Made of heavy gauge stainless steel also includes Pump Noise Isolation Kit.
|
214.23 |
|
|
Wiper Arm Deluxe Stainless Steel - Black - Single - 10"-14"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
29.76 |
|
|
Trolling Motor Propeller Cover- 3-Blade Cover - 10"- Black
Extend the life of your boat cover by protecting it from wear and tear caused by sharp edges on your trolling motor prop. Made from heavy-duty marine grade vinyl.
One-year warranty
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
22.21 |
|
|
Value Fit LED 4 Cube Flood Light - Black
Features:
4 High Intensity LEDs
Compact Size
Die-Cast Aluminum Housing
Stainless Steel Bracket
Calculated/Raw Lumens: 1080lm
Measured Lumens: 700
12W, 10-30 VDC
Dimensions: 3.2"W x 2.9"H x 3.2"D/80 x 75 x 80mm
|
42.53 |
|
|
Value Fit Mini 6 LED Flood Light Bar - Black
Features:
6 High Intensity LEDs
Die-Cast Aluminum Housing
Adjustable Stainless Steel Bracket
Calculated/Raw Lumens: 1080lm
Measured Lumens: 800, 18W
10-30 VDC
Dimensions: 6.3"W x 1.8"H x 2.5"D/160 x 45 x 88mm
|
31.90 |
|
|
Value Fit Sport Series 12 LED Flood Light Bar - 8" - Black
Features:
12 High Intensity LEDs
Die-Cast Aluminum Housing
Stainless Steel Bracket
Calculated/Raw Lumens: 2640lm
Measured Lumens: 1700
36W, 10-30 VDC
Dimensions: 8.2"W x 3"H x 3.5"D/208 x 75 x 88mm
|
107.84 |
|
|
HydroMax Rain Pants - 3X-Large - Black
Features:
Ultra Lightweight
Waterproof
Breathable
Windproof
Stretchable
Elastic waist
Leg zipper with adjustable cuff
Stuff sack included
|
52.80 |
|
|
Underdog Foam Flotation PFD - Red/Black - Medium
This PFD is for your best friend. The cape-style design has four adjustment points to ensure a secure fit on every dog. Constructed to support the pup's natural swim angle and provide maximum mobility, most of the buoyancy is under their neck and chest.
USCG-approved fabrics, including durable Cordura on the belly and neck panels, make this an ideal choice for keeping your pet safe and comfortable on the water. 3D mesh on the back keeps things breathable and cool, and reflective panels enhance visibility in low-light conditions. A reinforced carry handle and leash attachment point make the Underdog an excellent flotation device for the four-legged.
Features:
Cordura reinforcement on the belly and neck adds abrasion resistance
3D mesh on the back offers breathability
Four (4) points of adjustment for fitting different breeds
Reinforced web carry handle
Attachment point for a leash
Reflective panels for enhanced visibility in low-light conditions
Technical Specifications:
Color - Red/Black
Size - Medium
Chest Size - 24' - 30" (61 - 76 cm)
Weight - 24 - 60 lb (10.9 - 27.2 kg)
*Sold as a Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
83.99 |
|
|
MP Pump 31518 Gasket 032X6 Grafoil Ghr
|
64.06 |
|