Sealed Heavy-Duty Mini Fuse Holder - 30A - 12AWG Sealed In-line ATO and MINI fuse holders are designed to allow easy installation of fusing into potentially wet or dirty environments outside of the cab. Use with ATO fuses 1-30A or MINI fuses 2-30A. Comes with twin 8” red GXL wire leads for easy in-line installation. Features & Benefits: Rated IP67 with sealed cover for moisture & dust resistance Includes two 8” Red GXL wire leads for easy in-line installation Specifications: Max Voltage: 32V DC Available Fuse Rating: 1-30A Ingress Protection: IP67 Operating Temp: -40° to 85° C Applications: Local circuit protection outside of the cab External accessory lighting

Sealed Heavy-Duty ATO Fuse Holder - 30A - 12AWG Sealed In-line ATO and MINI fuse holders are designed to allow easy installation of fusing into potentially wet or dirty environments outside of the cab. Use with ATO fuses 1-30A or MINI fuses 2-30A. Comes with twin 8” red GXL wire leads for easy in-line installation. Features & Benefits: Rated IP67 with sealed cover for moisture & dust resistance Includes two 8” Red GXL wire leads for easy in-line installation Specifications: Max Voltage: 32V DC Available Fuse Rating: 1-30A Ingress Protection: IP67 Operating Temp: -40° to 85° C Applications: Local circuit protection outside of the cab External accessory lighting

Inline MAXI Blade Style Fuse Holder with Cover Supplied with two 5” leads - 6 gauge wire for up to 60A MAXI®/FK3 Fuse applications, this In-line Fuse Holder also provides a protective cover for harsh under-the-hood environments. The mounting hole also permits easy bulkhead installation. Features: Fuse Style/Series: MAXI Fuse Type: Maxi Mounting Method: In-Line Current Rating (Continuous) in Amps: 60 Voltage Rating (Max): 32

Heavy Duty In-Line Fuse Holder Accepts 12-18 AWG wire 30A Maximum fuse amperage Fuse sold seperately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Heavy Duty Toggle Switch DPST On-Off 4-Screw Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.

Heavy-Duty Adjustable Rod Holder with Combo Mount - White  This rod holder is designed for use with baitcasting and spinning reels. Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings Specifications: Color: White *Sold as an Individual

ATM Mini Style Inline LED Fuse Holder - Up to 30A This Sea-Dog LED inline mini fuse holder is meant for ATM mini-style fuses. Features: LED indicator that lights up when the fuse is blown Designed to accept ATM mini automotive-style spade terminal fuses For use with Sea-Dog ATM Mini Style Fuses 445002-445030 (sold separately). 12 gauge, 6” AWM wire lead Constructed of injection-molded PVC. IP67 waterproof rating Specifications: Max Amps: 30 Fuse Holder Length: 1-9/16 in. Fuse Holder Width: 15/16 in.

6 ATO Standard Series Fuse Block with Ground Bus 6 ATO ST Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. These products are RoHS compliant.  Features: Carded blister packaging for simple retail display Snap-on insulating cover (included) with label recesses & spare fuse holder Screw termination Integrated negative busbar Includes sheet of circuit identification labels Centralizes wiring to a convenient location The insulating cover provides circuitry protection Continuous current rating of 100A Current rating max per circuit: 30A Max Applications: Centralized distribution for accessory circuits Ideal solution for DIY projects *Fuses not included

12 ATO Standard Series Fuse Block with Ground Bus 12 ATO ST Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. These products are RoHS compliant.  Features: Carded blister packaging for simple retail display Snap-on insulating cover (included) with label recesses & spare fuse holder Screw termination Integrated negative busbar Includes sheet of circuit identification labels Centralizes wiring to a convenient location The insulating cover provides circuitry protection Continuous current rating of 100A Current rating max per circuit: 30A Max Applications: Centralized distribution for accessory circuits Ideal solution for DIY projects *Fuses not included

ATO/ATC Style Inline LED Fuse Holder - Up to 30A This Sea-Dog LED inline mini fuse holder is meant for ATO/ATC style fuses. Features: LED indicator which lights up when the fuse is blown Designed to accept ATO/ATC automotive-style spade terminal fuses For use with Sea-Dog ATO or ATC Style Fuses 445101-445130, 445190, 445156, and 445157 (sold separately) 12 gauge 6” AWM wire lead IP67 waterproof rating Specifications: Max Amps: 30 Fuse Holder Length: 1-1/4 in. Fuse Holder Width: 1 in.

COLE HERSEE Littelfuse acquired Cole Hersee to offer customers a more extensive portfolio of products in the commercial vehicle market. Cole Hersee is a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value. 

MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution. Features: Carded blister packaging for simple retail display Compatible with MIDI bolt-down fuses up to 200A (sold separately) The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block Slots molded into the base enable secure tie-wrap mounting Zinc-plated steel M5 studs and hex nuts Bolt-down fuse holder base features M4 mounting holes UL 94 V-0 flammability rating Applications: Battery and alternator Connections *Fuses not included

MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply. Features: Blister packaging promotes the easy retail display Base style 2 with mounting brackets and M6 holes is designed for outboard mounting M5 threaded studs, split washers, and hex nuts for simple fuse installation Protective cover openings at the ends accommodate heavy-duty cables Applications: High-Current Circuit Protection *Fuses not included