|
Sealed Heavy-Duty ATO Fuse Holder - 30A - 12AWG
Sealed In-line ATO and MINI fuse holders are designed to allow easy installation of fusing into potentially wet or dirty environments outside of the cab. Use with ATO fuses 1-30A or MINI fuses 2-30A. Comes with twin 8” red GXL wire leads for easy in-line installation.
Features & Benefits:
Rated IP67 with sealed cover for moisture & dust resistance
Includes two 8” Red GXL wire leads for easy in-line installation
Specifications:
Max Voltage: 32V DC
Available Fuse Rating: 1-30A
Ingress Protection: IP67
Operating Temp: -40° to 85° C
Applications:
Local circuit protection outside of the cab
External accessory lighting
|
8.32 |
|
|
Sealed Heavy-Duty Mini Fuse Holder - 30A - 12AWG
Sealed In-line ATO and MINI fuse holders are designed to allow easy installation of fusing into potentially wet or dirty environments outside of the cab. Use with ATO fuses 1-30A or MINI fuses 2-30A. Comes with twin 8” red GXL wire leads for easy in-line installation.
Features & Benefits:
Rated IP67 with sealed cover for moisture & dust resistance
Includes two 8” Red GXL wire leads for easy in-line installation
Specifications:
Max Voltage: 32V DC
Available Fuse Rating: 1-30A
Ingress Protection: IP67
Operating Temp: -40° to 85° C
Applications:
Local circuit protection outside of the cab
External accessory lighting
|
8.32 |
|
|
Inline MAXI Blade Style Fuse Holder with Cover
Supplied with two 5” leads - 6 gauge wire for up to 60A MAXI®/FK3 Fuse applications, this In-line Fuse Holder also provides a protective cover for harsh under-the-hood environments. The mounting hole also permits easy bulkhead installation.
Features:
Fuse Style/Series: MAXI
Fuse Type: Maxi
Mounting Method: In-Line
Current Rating (Continuous) in Amps: 60
Voltage Rating (Max): 32
|
17.14 |
|
|
Heavy Duty In-Line Fuse Holder
Accepts 12-18 AWG wire
30A Maximum fuse amperage
Fuse sold seperately
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
3.18 |
|
|
Heavy Duty Toggle Switch DPST On-Off 4-Screw
Cole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.
|
10.81 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.
|
18.29 |
|
|
Heavy Duty Adjustable Rod Holders
Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.
|
17.33 |
|
|
Heavy-Duty Adjustable Rod Holder with Combo Mount - White
This rod holder is designed for use with baitcasting and spinning reels.
Features:
An ergonomic design and easy-to-find rapid-release latch
Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings
Specifications:
Color: White
*Sold as an Individual
|
18.29 |
|
|
Jabsco 18690-0010 Heavy Duty Macerator Pump 115V 3" Ports
Pump Body:
Plastic, Self-Priming Flexible Impeller with Stainless Steel Wearplates.
Port Size:
Inlet – 3" Slip on Hose
Outlet – 1" ID Hose Barb
Flow:
14 GPM
Macerator:
Cast Bronze Cutter Plate reduces particle size to 1/8" maximum.
Impeller:
Nitrile
Shaft Seal:
Lip Type
Motor:
115 Vac, AC Induction Type Single Phase, 60 Hz Thermal Overload Protection.
APPLICATIONS
The Jabsco 18690-0010 AC macerator pump unit is the ideal answer to waste handling problems for marine, recreational vehicle and domestic uses. The macerator section grinds waste down to a particle size of 1/8" maximum so it can be pumped easily through a 1" hose discharge line. The pump is self-priming, permitting the unit to be mounted above or below the tank in a convenient location. For optimal efficiency, locate pump as close to waste source as practical. Empties a 30 gallon holding tank in only 3 minutes. The 18690-0010 waste pump will macerate and pump all waste and tissue normally found in marine waste systems.
|
1079.81 |
|
|
12 V Heavy Duty Tab Actuator - 6' Cable
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Stainless Steel - 12 gauge
Lower Mounting Bracket - Standard
*Sold as an Individual
|
234.85 |
|
|
12 V Heavy Duty Tab Actuator - 23' Cable
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Upper Mounting Bracket - Bolt, nut and washer
Lower Mounting Bracket - Bolt, nut, spacer and washer
*Sold as an Individual
|
251.33 |
|
|
12 V Heavy Duty Tab Actuator - 6' Cable for Everglades Boats
Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator. The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket. Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out. The actuator incorporates a standard or low profile transom mounting bracket.
Compatible With:
Everglades Boats
Features:
Stainless Steel upper mounting bracket
Reinforced actuator upper mounting boss
Upper ram seal location cannot be damaged due to fouled ram or barnacle growth
Utilizes internal pressure equalization system
Internal brake system prevents unwanted tab movement when under way or backing down
Quiet operation
All actuators fully load tested to push 1000 lbs of force
Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water
Technical Specifications:
Actuator DC Voltage - 12 V
Actuator Stroke Length - 2.25" (57 mm)
Actuator Cable Length - 6' (1.8 M)
Actuator Vertical Height - 11.875" (302 mm)
Connectors - Deutsch style
*Sold as an Individual
|
233.20 |
|
|
COLE HERSEE
Littelfuse acquired Cole Hersee to offer customers a more extensive portfolio of products in the commercial vehicle market. Cole Hersee is a pioneer and leader in the development of heavy-duty electrical products for the vehicle industry, and have earned a reputation for quality and value.
|
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
6 ATO Standard Series Fuse Block with Ground Bus
6 ATO ST Fuse Block provides a cost-effective, consolidated circuit protection solution. These products are designed to accept standard ATO fuses and ensure safe power distribution throughout an application. These products are RoHS compliant.
Features:
Carded blister packaging for simple retail display
Snap-on insulating cover (included) with label recesses & spare fuse holder
Screw termination
Integrated negative busbar
Includes sheet of circuit identification labels
Centralizes wiring to a convenient location
The insulating cover provides circuitry protection
Continuous current rating of 100A
Current rating max per circuit: 30A Max
Applications:
Centralized distribution for accessory circuits
Ideal solution for DIY projects
*Fuses not included
|
47.94 |
|