5.5" Thermal Camera Mount Aft Leaning for M100 & M200 Series Get the most out of your FLIR M100 and M200 Series Thermal Camera with Seaview's Aft-Leaning Camera Mount. Measuring 5.5" tall, the Seaview Aft-Leaning Camera Mount provides flexibility in any installation, especially when saving space is a top priority.  Features: 5.5" Tall, Aft-Leaning Mount compatible with FLIR M100 and M200 Series Thermal Cameras Elevates electronics for optimum performance and allows for flexibility in installation Hollow, oval heavy-duty mast section supports mounted electronics and allows for convenient cable/wiring management Pre-drilled, 7" x 7" base footprint allows for a simple and easy installation Compatible Units: FLIR M132 FLIR M232 Specifications: Orientation: Aft-leaning Material: Marine-grade aluminum Finish: Powder coated white

5" Thermal Camera Mount f/FLIR M100 & M200 - 8" Round Base Get the most out of your FLIR M100 or M200 camera with the Seaview PM5-FMH-8 camera mount. This mount will raise your camera 5.5" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

5.5" Thermal Camera Mount for FLIR M300 Series Cameras Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″. Cable Management  A hollow oval mast section provides plenty of room for cable management. Space Saving Design The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue.

PM5FM38 Thermal Camera Mount for FLIR M300 Series Vertical 8" Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.63" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.  Extra Security  No visible bolts on the camera mounting plate provides extra security and improved aesthetics.  Small Base Foot Print This mount is the perfect solution for installations where space is limited.

5" Vertical Camera Mount for Sionyx - Black Get the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

PM5-FMT-8 Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your cameras view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provides extra security and improved aesthetics. Small Base Fotprint This mount is the perfect solution for installations where space is limited.

5" Vertical Camera Mount for Sionyx Get the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct the view of your camera. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation. Extra Security No visible bolts on the camera mounting plate provide extra security and improved aesthetics. Small Base Foot Print This mount is the perfect solution for installations where space is limited.

12" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″. Cable Management A hollow oval mast section provides plenty of room for cable management. Space-Saving Design The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. 

Light Bar for M100 & M200 FLIR for M2 Mounts Only - Must Pick LTB Top A 2” diameter Light Bar designed to work with FLIR M100/M200 Series. Contact Seaview directly to make sure this light bar is right for your boat. Not intended for fast ocean going boats. Will not work with 24” satdomes. This will clear 20” satdomes or smaller

5.25" AFT Leaning Mount for Searchlights & Thermal Cameras with 7" x 7" Base Plate Seaview 5" and 12" tall aft leaning mounts for thermal cameras and searchlights. Powder-coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″. Cable Management A hollow oval mast section provides plenty of room for cable management. Space-Saving Design The small 7"x 7" base footprint makes this a great solution to an installation where space is an issue. 

6.38" Vertical Searchlight & Thermal Camera Mount with 8" Round Base Plate Get the most out of your thermal camera or searchlight with a Seaview vertical mount. This mount will raise your camera 5.5" - 5.75" clearing anything that will obstruct your camera's view. The 8" diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allow for simple and easy installation.  Extra Security No visible bolts on the camera mounting plate provide extra security and improved aesthetics.  Small Base Footprint This mount is the perfect solution for installations where space is limited.

1.5" Thermal Camera Top Down Riser Mounts Vertical or Upside Down for FLIR MD-Series & Raymarine T-200 Ever wanted to hand your FLIR M-Series or Raymarine T-Series upside down? Well now you can with the Seaview Top Down Riser. Made from Kingstarboard a durable weather resistant marine grade polymer. Unique Design This unique design allows you to mount your FLIR MD Series or Raymarine T200 upside down. High Strength  Made from white ABS glass filled plastic. This helps prevent the plastic from cracking in severe conditions. Ribbing is added for increased strength.

Bail Mount w/Knobs f/GPSMAP® 7x2 Series Surface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Camera Mast Mount f/FLIR M100/M200 The ingenious Camera Mast Mount solves the problem of finding a level mounting surface to install cameras onto your powerboat, commercial vessel, RIB or sailboat wheelhouse. designed specifically for the FLIR M100 / M200 range ensuring the perfect fit for your camera. Scanstrut Mast Mounts are the first choice for boat owners the world over. The range has been extended so we now offer an option for installing Infrared red cameras onto the yachts mast. Features: The only aft raked camera mounts on the market Compact mounting profile to ensure a neat installation Scanstrut renowned design and build quality Partnership with Raymarine to create the optimum mounts for the M100/M200 series Compact mounting feet to ensure a neat & effective installation   Very Compact Mounting - Camera fits safely and snugly against the mast Universal Fit and Secure Install - Adjustable mounting feet which fit any mast size. The four swivel feet use a 12 point fixing using high quality monel rivets Safety Wire Kit -  Independently attaches the camera to mast in case an accident damages the installation

12" Aft Leaning Camera Mount Get the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5" tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install. Cable Management A hollow oval mast section provides plenty of room for cable management. Space Saving Design The small 7"x 7" base foot print makes this a great solution to an installation where space is an issue. Fits: Raymarine - T200,T300,T400 Flir - MD324, MD625, M625S, M625CS, M612L, M617CS, M618CS Comnav - Explorer V2, V3