NMEA 2000 Starter Kit - Single Unit From boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking on your Humminbird control head. The NMEA 2000 Starter Kit - Single provides the essential components to build a single device NMEA 2000 network.  Features: Compatible with: HELIX G4N models and all SOLIX models. Compatible Humminbird Legacy models (must also use (1) AS ETH NMEA2K and (1) AS EC QDE) : HELIX 7 G2N/G3N, all HELIX 8, all HELIX 9, all HELIX 10, all HELIX 12 Update bullet #3 : Kit includes: (1) 1 meter power cable and T -connector, (1) male terminator, (1) female terminator, (1) T-connector, (1) 2 meter (6.5ft) drop cable 1-Year Limited Warranty

NMEA 2000 Starter Kit - Dual Unit From boat performance to weather and water conditions, make sense of it all with NMEA 2000 networking on your Humminbird control head. The NMEA 2000 Starter Kit - Dual provides the essential components to build a dual device NMEA 2000 network. Features: Compatible with: HELIX G4N models and all SOLIX models Compatible Humminbird Legacy models (must also use (1) AS ETH NMEA2K and (1) AS EC QDE) : HELIX 7 G2N/G3N, all HELIX 8, all HELIX 9, all HELIX 10, all HELIX 12 Kit includes: (1) 1 meter power cable and T-connector, (1) male terminator, (1) female terminator, (1) T-connector, (2) 2 meter (6.5ft) drop cables 1-Year Limited Warranty

NMEA 2000 starter kit includes: Do you need to build a basic NMEA 2000 network? Look no further than our NMEA 2000 starter kit. This kit includes an NMEA 2000 drop cable (2 m), NMEA 2000 backbone cable (6 m), NMEA 2000 power cable (2 m), two NMEA 2000 T-connectors, NMEA 2000 male terminator and NMEA 2000 female terminator. Features: NMEA 2000 drop cable (2M) NMEA 2000 backbone cable (6M) NMEA 2000 T-connector and terminator kit NMEA 2000 power cable with T-connector kit WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Maretron NMEA 2000 Starter Kit Building a New NMEA 2000 Network onboard? Save when buying this Maretron NMEA 2000 Starter Kit. Everything you need for a basic NMEA 2000 Bus/Network or to start a complex one. Please see the ACCESSORIES tab above if additional equipment is needed The Kit Includes: One Micro/Mid Powertap Tee CF-SPWR05-CF Two Micro Tee CM-CF-CF Two Micro Terminators TR-CM One 3 meter Cordset CM-CG1-CF-03.0

NMEA 2000 Starter Kit 1 Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability. Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (1) Micro Tees (CM-CF-CF) (1) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Male Terminators (TR-CM) *Sold as a Kit

NMEA 2000 Starter Kit 2  Maretron's deluxe starter kit provides all the necessary cables and connectors necessary to connect two products together on an NMEA 2000® network.   Contacts are gold-plated brass and couplings are nickel-plated brass for durability and reliability. Included in the Box: (1) 5-Meter Micro Powertap Cable (CF-SPWR05-CF) (1) 10-Meter Micro Trunk/Backbone Cable (CM-CG1-CF-10.0) (2) Micro Tees (CM-CF-CF) (2) 2-Meter Micro Drop Cables (CM-CG1-CF-02.0) (2) Micro Terminators (TR-CM) *Sold as a Kit

NMEA 2000 Starter Cable Kit Nearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together. With Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future. There are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price. By utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately. Features: Everything you need in one box Smart 4-Way T-Piece “Backbone” 1M (3') Power Cable with in-line fuse 1M (3') “Drop Cable” Pair of removable network terminators Allows three devices to be connected Standard “Micro C” connectors make it very easy for future network expansion Metal connectors and reduced T-Piece connections, improve reliability

NMEA 2000 Single Device Starter Kit Ancor's NMEA 2000 Starter Kits include all components needed to create a single device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each) item# 270105 and 270106 One single tee connector, item# 270101 One 2 meter drop cable, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network. Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense. The equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if needed. The Micro power cord provides a unique solution to quickly power your network that is easy to install, taking ‘Plug & Play’ to the next level. The NMEA 2000 Starter Kit 3 contains: A2K-MPC-1: NMEA 2000 Micro power cable, 3m UL certified cable A2K-TER-F: NMEA 2000 micro terminator female – to terminate one end of the network A2K-TER-M: NMEA 2000 micro terminator male – to terminate one end of the network A2K-4WT: Multi Drop T

NMEA 2000 T-Connector - 1-Way Extension Block As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed. *Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit). Features: NMEA 2000 Single T-Piece Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68

NMEA 2000 Dual Device Starter Kit Ancor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each), item# 270105 and 270106 One dual tee connector, item# 270103 Two 2 meter drop cables, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000 T-Connector - 6 Ports As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use this 4-way T-piece to add another four additional devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. Also, The 4x lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed. *Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit). Features: NMEA 2000 4 x T-pieces Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68

NMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension cable (N2KEXT-2RD), and one 15 ft extension cable (N2KEXT-15RD), and a power node (N2K-PWR-RD). For use with all Red network devices. Compatible With: GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, LCX-112C, LCX-113C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF

NMEA 2000 Compatibility Kit  This NMEA 2000 Kit allows Polk's Ultra Marine Certified P1 and PA4A to be seamlessly added to your boat's onboard NMEA 2000 network, enabling control and two-way communication from your boat's Garmin and Raymarine Chartplotter/Fish Finder Multi-Function Display (MFD) device. Control functions include source selection, playback functions, volume up/down and more.  Two-way communication between the Polk P1 and PA4A and your MFD also allows the display of source selection, song/track/album title (no album art), radio frequency and more to display on the MFD interface.  Comaptable With:  Polk PA4A receiver Polk P1 Marine receivers  In the Box: NMEA2000 interface module 12" NMEA 2000 cable 11" Y-adapter cable *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000 Sailing Kit with OceanLink® GPS Speedometer, Wind Sensor, Wind Angle & Wind Speed Gauge Includes: OceanLink® GPS Speedometer Wind Sensor Wind Angle Wind Speed Gauge This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.