|
Bluetooth Dongle - Audio Receiver
The BT-TWO allows "Connect & Play" integration to your audio device by BT A2DP, with the ability to be a stand-alone source. The BT-TWO does not interfere with hands-free systems!
The ideal application is to be used as a stereo head unit replacement and in combination with an amplifier via RCA connectors.
Features:
Works w/Android and Apple OS
Waterproof IP65 Rated
Stereo Male RCA Output
BT 4.0 (higher sound quality, faster speed, longer range)
Remote Trigger Output
Low Current Draw - 20mA
In-line Fuse Protection
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.54 |
|
|
Bluetooth Dongle
Have a stereo without Bluetooth, but want to upgrade to Bluetooth without paying for a brand new stereo? Look no further than this small BT module. Connect the RCA outputs from the MIL-BTREC module into the RCA aux input from your stereo, and wire to 12V power and 12V ground.
Features:
Connects to any stereo with an RCA auxiliary input
Allows you to stream audio from your smartphone to your radio
Requires both power and ground
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
32.68 |
|
|
Marine Bluetooth Dongle (Audio only)
Designed to enable Bluetooth audio streaming from a compatible Apple, Android, Windows, BlackBerry or other Bluetooth compatible media device directly to any Fusion marine stereo (with AUX input). The MS-BT100 supports live audio streaming and is accessed through the auxiliary input audio source on your stereo. Whether you have an iPhone, Android or Windows smartphone you can enjoy your favorite audio tracks through Fusion's award winning marine entertainment systems.
Features:
Live Audio Streaming: Apple, Android, Windows, BlackBerry or other Bluetooth compatible device streaming
Media Device Control: Navigate your music library while you're on the move directly from your smartphone
Simple installation: Connect the RCA connectors to the AUX input on your Fusion marine stereo. +12V Power and ground connection required
Designed with the marine environment in mind, the MS-BT100 boasts International IP65 water resistant rating to protect against the harsh marine environment
The MS-BT100 has an effective range of 33 ft around your vessel, so whether you're on the deck or at the helm enjoy uninterrupted audio streaming
1 Year Limited Consumer Warranty: For peace of mind
Functionality:
If you're on the move or relaxing on the deck, simply reach into your pocket for direct Media Device Control of the audio experience from your compatible device
Simply connect the MS-BT100 to the Auxiliary input RCA connectors on your marine stereo and connect the power to the amplifier power output for instant Bluetooth functionality
*Compatible with any Bluetooth enabled Fusion Marine Stereo.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.86 |
|
|
Golf Cart Package with 6.5" Black Speakers, Amplifier, Amp Kit & Bluetooth Remote
Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.
If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver. This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth.
The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers. These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course. You can get the complete sound you crave on-demand with these speakers.
Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system. This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package.
We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit. DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.
Features:
Bluetooth connectivity via Android and iPhone
High-quality sound
Easy to install and use
Small equipment footprint
Waterproof speakers for complete protection and longevity
Technical Specifications:
Speaker Maximum Power - 180W
Speaker RMS Power - 60W
Speaker Dimensions (Diameter x Depth) - 7.16" x 3.8" (18.2 x 9.7 cm)
Amplifier Power - 1800W
Amplifier Channels - Two (2)
Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm)
Bluetooth Wire Length - 4' (1.22 M)
Bluetooth Audio Receiver - AUX input and USB port
Bluetooth Dimensions (L x Depth x H) - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)
In the Box:
1 x Pair of MP6 6.5" Speakers - Black
1 x SELECT 2 Channel Amplifier
1 x BTRC-SQ Audio Receiver
1 x AMPKIT8 Installation Kit
*Sold as an Individual
|
399.36 |
|
|
Golf Cart Package with 6.5" White Speakers, Amplifier, Amp Kit & Bluetooth Remote
Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.
If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver. This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth.
The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers. These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course. You can get the complete sound you crave on-demand with these speakers.
Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system. This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package.
We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit. DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.
Features:
Bluetooth connectivity via Android and iPhone
High-quality sound
Easy to install and use
Small equipment footprint
Waterproof speakers for complete protection and longevity
Technical Specifications:
Speaker Maximum Power - 180W
Speaker RMS Power - 60W
Speaker Dimensions (Diameter x Depth) - 7.16" x 3.8" (18.2 x 9.7 cm)
Amplifier Power - 1800W
Amplifier Channels - Two (2)
Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm)
Bluetooth Wire Length - 4' (1.22 M)
Bluetooth Audio Receiver - AUX input and USB port
Bluetooth Dimensions (L x Depth x H) - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)
In the Box:
1 x Pair of MP6 6.5" Speakers - White
1 x SELECT 2 Channel Amplifier
1 x BTRC-SQ Audio Receiver
1 x AMPKIT8 Installation Kit
*Sold as an Individual
|
399.36 |
|
|
Golf Cart Package w/4" Black Speakers, Amplifier, Amp Kit & Bluetooth Remote
Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.
If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver. This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth.
The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers. These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course. You can get the complete sound you crave on-demand with these speakers.
Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system. This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package.
We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit. DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.
Features:
Bluetooth connectivity via Android and iPhone
High-quality sound
Easy to install and use
Small equipment footprint
Waterproof speakers for complete protection and longevity
Technical Specifications:
Speaker Maximum Power - 150W
Speaker RMS Power - 50W
Speaker Dimensions (Diameter x Depth) - 5.43" x 3.03" (13.8 x 7.69 cm)
Amplifier Power - 1800W
Amplifier Channels - Two (2)
Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm)
Bluetooth Wire Length - 4' (1.22 M)
Bluetooth Audio Receiver - AUX input and USB port
Bluetooth Dimensions (L x Depth x H) - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)
In the Box:
1 x Pair of MP6 4" Speakers - Black
1 x SELECT 2 Channel Amplifier
1 x BTRC-SQ Audio Receiver
1 x AMPKIT8 Installation Kit
*Sold as an Individual
|
381.36 |
|
|
Golf Cart Package w/4" White Speakers, Amplifier, Amp Kit & Bluetooth Remote
Upgrade your golf cart to capture the sound of music while on the front 9 of any course or just cruising around.
If streaming music is on your mind, then this DS18 Bluetooth package will add connectivity to your golf cart with the user-friendly BTRC-SQ Bluetooth Audio Receiver. This unit will send out signals to your amplifiers and give you control over the music being played via Bluetooth.
The MP6 2-Way Marine Speaker is the newest arrival to the MP series of marine speakers. These speakers come in 2-way configurations and have an IPX5 Waterproof Rating so this product is built to endure all the elements out on the course. You can get the complete sound you crave on-demand with these speakers.
Also included is the SELECT 2 Channel amplifier, a compact and powerful (1800 Watts Max) amplifier that’s perfect for any golf cart audio system. This amplifier is designed for people who want a very small audio footprint, while also having the benefits of a huge amplifier putting out lots of power in a small package.
We’ll make sure you have everything you need to easily hook up your amplifier with an installation kit. DS18 kits are made with true gauge wire, heavy-duty hardware, fusing, and signal cables for long-lasting installations.
Features:
Bluetooth connectivity via Android and iPhone
High-quality sound
Easy to install and use
Small equipment footprint
Waterproof speakers for complete protection and longevity
Technical Specifications:
Speaker Maximum Power - 150W
Speaker RMS Power - 50W
Speaker Dimensions (Diameter x Depth) - 5.43" x 3.03" (13.8 x 7.69 cm)
Amplifier Power - 1800W
Amplifier Channels - Two (2)
Amplifier Dimensions (L x W x D) - 7.4" x 5.83" x 1.87" (18.8 x 14.8 x 4.75 cm)
Bluetooth Wire Length - 4' (1.22 M)
Bluetooth Audio Receiver - AUX input and USB port
Bluetooth Dimensions (L x Depth x H) - 3.81" x 1.47" x 2.19" (9.7 x 3.74 x 5.58 cm)
In the Box:
1 x Pair of MP6 4" Speakers - White
1 x SELECT 2 Channel Amplifier
1 x BTRC-SQ Audio Receiver
1 x AMPKIT8 Installation Kit
*Sold as an Individual
|
381.36 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
SmartSolar MPPT Solar Charge Controller - 250V - 70AMP - UL Approved
A solar charger gathers energy from the solar panels and stores it in the batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
Feature Highlights Common to All Models:
Ultra-fast Maximum Power Point Tracking (MPPT).
Advanced Maximum Power Point Detection in case of partial shading conditions.
Outstanding conversion efficiency.
Natural convection cooling.
Automatic battery voltage recognition.
Flexible charge algorithm.
Over temperature protection and power derating when the temperature is high.
Sizing Options:
Suitable for a variety of battery voltages. Most models connect to 12, 24, and 48V batteries, some only connect to 12 and 24V batteries, or only to 48V batteries.
Charge currents rating from 10A up to 100A.
Maximum PV array Voc voltages ranging from 75V up to 250V.
Multiple chargers can be used in parallel, for large systems we recommend using the models with a VE.Can communication port.
PV Terminal Options:
TR - one positive and one negative screw terminal.
MC4 - 3 pairs of paralleled MC4 connectors.
Bluetooth Options:
SmartSolar models have Bluetooth.
BlueSolar models do not have Bluetooth. They can be retrofitted to have Bluetooth by connecting the VE.Direct Bluetooth Smart dongle. Advantage: the product is not Bluetooth accessible when the dongle is not connected. Note that on the SmartSolar models, Bluetooth can be disabled.
Display Options:
VictronConnect Application. Connects via Bluetooth or via the VE.Direct - USB interface
MPPT Control. Connects to all models via a VE.Direct cable
SmartSolar Control Display. Plugs directly into the housing of the larger models
GX device
VRM website (GX monitoring device needed)
Communication Ports:
VE.Direct - all models
VE.Direct and VE.Can - limited models. VE.Can is especially suitable for systems with multiple solar chargers. All units are simply “daisy chained” to each other with a single RJ45 cable between each unit and also between the last unit in the chain and the GX monitoring device.
Temperature Sensor Options:
Internally (all models).
Externally via the Smart Battery Sense (only SmartSolar models).
Load Output Options:
Physical output - On the 10, 15 and 20A models.
Virtual output - via VE.Direct TX digital output cable and the BatteryProtect or a solid-state relay.
Remotely Enabling and Disabling the Charger:
All larger units feature the Victron standard remote on/off terminals. All models that don’t feature an onboard Remote on/off terminal can be remotely controlled by using the VE.Direct non-inverting remote on/off cable – ASS030550310. Note that this prohibits using the VE.Direct port for anything else.
Firmware Update Options:
Local updates via the VictronConnect Application (via Bluetooth or USB-VE.Direct interface)
Remote updates via the VRM website and a GX device
Optional Accessories:
VictronConnect Application (free download)
Wire boxes, to cover and protect the terminals. See table on page 2 for wire box types
Control and display panels: MPPT control or SmartSolar control)
GX monitoring device (CCGX, Venus GX, Octo GX, or Cerbo GX)
Data cables: VE.Direct cable, RJ45 Cable (VE.Can models only), USB-VE.Direct interface
External control cables: TX cable, non-inverting cable
Bluetooth dongle (for non-smart models)
Specifications:
Load Output: No
Battery Voltage: 12/24/36/48V
Optional Display: MPPT ctrl & SmartSolar ctrl
Bluetooth: Built-in
Com. Port: VE.Direct
Remote On-Off: Yes
Programable Relay: Yes
Wire Box: L
Please contact your dealer for any returns, repairs or support issues related to this product.
|
574.26 |
|
|
Rocker Switch Bluetooth Receiver & Controller
DS18’s Bluetooth Rocker Switch Audio Streamer makes controlling your Marine, Powersports, and Motorcycle Sound Systems EXTREMELY easy!
Installation is just as easy with the integration of DS18’s Universal Rocker Switch Mount! Install the RKS-BT into your Boat’s Rocker Switch Panel for easy access and instant power! Bluetooth v5.0 makes the RKS-BT discoverable from up to 130 ft. away!
Switch between your audio sources with the press of a button. The blue back-lit silicon buttons make for easy viewing during those relaxing boat rides at night!
The RKS-BT also allows you to turn on your amplifier with the push of a button letting it double as a stand-alone receiver and head unit!
Requires a 21.5 mm x 36 mm hole cut for installation!
Features:
Universal Rocker Switch Mount
IPX6 Water Resistance Rating
Built-in Wireless BT Audio Receiver
Bluetooth v5.0
Easy-to-use blue back-lit silicon buttons
5 mm Auxiliary Audio Input
Stereo 2.5v Pre-out RCA
Remote output to control external amplifier
Integrated Power Wiring Harness
Overload & Power Protection Circuitry
Technical Specifications:
Frequency Response - 20Hz-20KHz
Signal to Noise Ratio - >80dB
Voltage Operation - DC 10-15V
Fuse Size - 2 Amp
Wireless Range - >130 ft (conditions may vary)
Waterproof Rating - IPX6
Measurements - 1.1" (L) x 2" (H) x 2.8" (D)
Mounting Depth - 2.3"
In the Box:
(1) Rocker Switch Wireless BT Control Unit
(1) 3.5 mm Audio Connection Cable
*Sold as an Individual
|
107.94 |
|
|
VE. Direct Bluetooth Smart Dongle
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data.
The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
47.94 |
|
|
MRX100 2 Zone Marine Head Unit with TFT LCD Screen - 4x50 Watts Max
DS18’s MRX100 Marine Head Unit is designed to do it all and then some! The same beautiful compact design, upgraded to be even more powerful and durable to endure the toughest beating any marine, golf cart, and off-road head unit will go through.
The experts at DS18 upgraded this powerful receiver with: higher-range Bluetooth connectivity, substantial material changes for extended longevity, and lower operating voltage for power consumption efficiency.
The MRX100 also allows classic users to browse over 37 preset radio stations without needing a device to be connected to it. However, if users wish to connect a device, upgraded Bluetooth connection features and USB and AUX input make it so they can connect to any device they want to.
If there’s a rear camera attached to the vehicle, users can also utilize this product to view the rear camera directly helping them maneuver the vehicle to which they’ve attached it.
The MRX100 is guaranteed to bring crystal clear audio quality with unchecked control over how the audio sounds (via a variety of sound settings) at all volumes in your boat, off-road, golf cart, or any vehicle that will be tested by the elements frequently.
Features:
V5 Bluetooth pairing functions so you can play music direct from your phone or any BT source with a longer operating range.
Gorilla Glass Screen for added fortitude and longevity in every element
ID3 Tag Display that helps ensures users know exactly what they are listening to at all times
It comes with precise sound settings options that let you control the bass, treble, balance, fade, EQ, loudness, and Subwoofer crossover with ease.
There is an easy to read LCD display with RGB keys so you can use the color that's easiest to read, to set your mood of the day, or color scheme!
37 Radio Presets (18 FM / 12 AM / 7 WB) for easy access.
The USB can transfer music along with charging your chosen device at the rate of 2.1 A.
The IPX6 waterproof rating will give you the confidence to use your marine head unit anywhere and everywhere.
Users can also utilize this product to view their vehicle's rear camera directly
Voltmeter and Low Voltage Alert to help maintain and optimize all equipment controlled by and connected to this unit
The MRX100 is made to deliver 4 x 18 watts RMS @ 4-Ohms and 4 x 25 watts RMS @ 2-Ohms
Enjoy all your favorite AM/FM stations with our wideband AM/FM receiver that is also selectable under source controls.
Technical Specifications:
Operating Voltage - 10.5 -16 Volts
Backlight - LED
Power Output RMS - 4 x 18W @ 4 ohms (14.4v) / 4 x 25W @ 2 ohms (14.4v)
Frequency Response - 20Hz to 20KHz
Output Impedance - 500 ohms
Remote Control - Wired 3.5mm Jack Input (Compatible with MXRC)
In the Box:
Main unit
Screws x 2PCS
U bracket
Power/Speaker Harness
Hex Head Screws x 2PCS
Instruction Manual
*Sold as an Individual
|
359.94 |
|
|
SmartShunt 1000AMP/50MV Bluetooth Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
VictronConnect
VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
221.34 |
|
|
SmartShunt 2000AMP/50MV Bluetooth Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
VictronConnect
VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
300.90 |
|
|
SmartShunt 500AMP/50MV Bluetooth Smart Battery Shunt
The Smart Battery Shunt
The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor.
VictronConnect
VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
133.62 |
|