Internal RF Cables for S6HD Internal RF Cable Set for Intellian s6HD. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Elevation Limit Switch for i6, s6HD & i9 Elevation Limit Switch Cable for Intellian i6/ i6P/i6PE/i6W/s6HD/i9P/i9W. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RG-11 RF Cable for with right angle connector 50' length 75Ω Belden SNS11AS Connectors One end terminated and one loose connector supplied When determining cable lengths, remember to account for service loops (usually 14" at each end)

External GPS Antenna with 8" Cable for Cortex M1 & 10M Coax Cable External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision, or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks. Features: Small SMA connector for easy installation Pre-wired 200mm (8”) RF cable for easy servicing Two mounting configurations (deck or under deck) UV stable housing provides good color stability Specifications: UV stable plastic with a zinc-plated alloy base Dimensions: 60mm x 19mm Loom: 200mm Color: White Mounting: Bulkhead, pole, deck, and underdeck mounting

Extension Cable f/500 Series VHF/AIS Antennas - 10' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Extension Cable f/500 Series VHF/AIS Antennas - 20' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

HDMI Cable f/GPSMAP 8400/8600 Connect your GPSMAP 8400 or 8600 series chartplotter to an high definition external video source, up to 1080p. The water resistant and secure connection allows you to watch a full HD video feed with audio right on your chartplotter’s screen. The GPSMAP 8400/8600 supports watching videos in full or split screen from popular devices connected with this 15-foot HDMI cable to the HDCP-compliant HDMI input port. This also allows mobile device connectivity for mirroring or streaming audio and video from HDMI-connected devices, including mobile phones and tablets connected via external adapters or dongles. Audio playback on stereos typically requires NMEA audio cable. You can also output full HD from your chartplotter screen and associated audio to an additional monitor or TV through HDMI¹. If using with a computer to gain touch control access, use with a USB cable (sold separately). Connect to DVI-D devices with standard DVI-to-HDMI adapters or cables (sold separately). ¹This will not allow display of HDCP-protected content on remote display WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Current Transducer w/Cable f/DCM100 - 200 Amp The Maretron LEMHTA200-S is a current transducer for the Maretron DCM100. Features 200 amps Includes cable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Power Cable f/echo™ Series Supply power to your echo series fishfinder with this 6 ft. (1.8 m), 4-pin cable. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4M Transducer Extension Cable f/CHIRP & DownVision™ Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100.

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-Fish Use Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers.

Handset Extension Cable f/Ray60/70 - 10M Raymarine's 10M cable is used to extend the handset that is included with Raymarine's Ray60 and Ray70 VHF Radios.

10m Scanner Cable f/3G & 4G Radar 3G/4G Scanner connection cable - 10 m (33 ft)

Video Cable F-Type to BNC - 25' 25' Cable - F-Type on one end, BNC on the other end For use with MD-Series

Video Cable F-Type to BNC - 50' 50' Cable - F-Type on one end, BNC on the other end For use with MD-Series