|
Dome Top Only for HD7 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's HD7 includes mounting hardware
|
1189.27 |
|
|
Dome Top Only for TV3 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV3 includes mounting hardware
|
351.00 |
|
|
Dome Top Only for TV5 with Mounting Hardware
Features:
Top Half Only
Specifically for KVH's TV5 includes mounting hardware
|
801.46 |
|
|
WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°
Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Mounts between PowerTower® mount and base of radar.
Compatible with:
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - AS 21RD4KW, HB 2124 CHIRP radars
Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-12 radar
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A rugged, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine Grade Polymer
Dimensions (L x W ) - 11.10" x 9.09"
Angle - 4°
In the Box:
Wedge
Base seal
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
X52 Tilt Mechanism w/Mounting Hardware
Tilt range of 48° and five locking positions - suitable on tilt mount helms
X52 tilt mechanism fits Ultraflex tilt mount rotary and rack and pinion steering helms as well as Ultraflex tilt mount hydraulic pumps except SilverSteer™ and MasterDrive™ steering systems
|
171.68 |
|
|
TV1 Dome Top with Labels & Mounting Hardware *Base Not Included
Replacement dome top for KVH TV1 (does not include base).
|
341.36 |
|
|
Starlink Adapter Plate for 24" KVH Domes with Starlink Stainless Steel 1"-14 Threaded Adapter & Stainless Steel Fixed Base
Features:
316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate
The ¼” aluminum plate is powder-coated white and fits inside an empty KVH 24” dome
|
288.00 |
|
|
12.5" Dual Mount for Most Radar Domes - Top for Sat Domes - Top Plate Required
Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*
|
1008.00 |
|
|
22.5" Dual Mount for Up To 4.5' Open Array Radar - Top for Sat Domes - Top Plate Required
Install your satdome, camera or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. Oval hollow mast section allows for easy cable management.
Compact Design
Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must.
Eliminate Interference
A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for cleaner installation.
Universal
The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or a open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.
Modular Top Plate
The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them. *Top Plate Sold Separately*
|
1488.00 |
|
|
Aurora LED Dome Light - White & Red Output - Flush Mount
LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming.
Features:
Dual-color with dimming
Built-in bezel switch
Completely sealed, IP67 Compliant
Easy 2-wire hook up
3-year warranty
|
97.96 |
|
|
Aurora LED Dome Light - White & Blue Output - Flush Mount
LED replacement for the ubiquitous dome light provides bright, wide even light. The Aurora LED Dome Light has clean look, an intuitive and reliable switch, and a notable level of quality. Includes IP67 immersion protection with multiple color output options and dimming.
Features:
Dual-color with dimming
Built-in bezel switch
Completely sealed, IP67 Compliant
Easy 2-wire hook up
3-year warranty
|
97.96 |
|
|
Flared Top Saddle f/Small T-Cleat & C-Cleat
Features:
Used to keep the uncleated line within close proximity to the cleat, facilitating recleating
Suits small C-Cleat and T-Cleat
Grade 316 stainless steel
|
4.75 |
|
|
TP325 Top Plate f/Converting Merriman/Yacht Specialties Steering Systems to 12" Wide 1.25" Diameter AngelGuard
12" Top Plates are used for upgrading from an existing 1" diameter pedestal guard to a 1.25" StraightGuard or AngleGuard. Specifically designed for Converting Merriman or Yacht Specialties steering systems.
12" Top Plates Include:
316 Stainless Steel
Mirror Polished Finish
Precision Laser Cut
|
191.99 |
|
|
Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
|
124.22 |
|
|
SAS-300 Class B AIS System - Display Only for Use with Existing AIS
The SAS-300 is a complete Class B AIS system designed for simple to use management, control and display of all AIS targets within VHF range. AIS data can be received from all types of Class B or Class A transponders, and can be displayed either on a "radar" type display, with chart overlay or without. The vivid graphics and the simple menu structure on the 6.5 inch, high resolution displays make the unit easy to use. The data is easy to access and the information easy to analyze, enabling the user to quickly move from screen to screen and gain access to the information specifically required.
Features:
Complete information from all AIS vessels
Radar Style Display
Heads Up, North Up, and True Motion Chart Orientations
Plot targets on detailed C-Map Charts
Bright 6.5" TFT LCD Display
5 track memories totaling 50,000 pts
Programmable CPA and TCPA alarms
Display vessels by selectable color and icon
Filter vessels by type of transmission
Built in Class B AIS Transceiver
Transceiver easily programmed via keypad
Transmitter easily silenced via keypad
Tracks the movement of up to 5 vessels with 50,000 point track history and optional live details on individual vessels
Monitors position, speed and heading of vessels on a background chart or on detailed C-Map cartography (optional)
Allows variable parameters to be set for CPA and TCPA alarms
Listing of all vessels with name, MMSI, range and bearing, with full details on each vessel, and instant GOTO function
Ability to display different types of vessels by color, and different types of transmission by icon shapes
Displays the Following Information:
Class A vessels
Class B vessels
Base Stations
Aids to Navigation
AIS SARTs
Search & Rescue
*Display ONLYThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
803.99 |
|