Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMT The RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Features: Open access to all electronic ports including audio port, speaker/mic and mini USB Roller design for super smooth placement and removal of the GPS Custom pocket for factory dock Lifetime warranty Made in the U.S.A. Material: High Strength Composite Note: *The RAM-HOL-GA54U was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.

Locking Case for the Garmin dezl™760LMT, nuvi® 2797LMT & RV 760LMT The RAM-HOL-GA61LU consists of a high strength composite locking case and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Locking Case Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Custom pocket for factory dock 3. Rugged construction deters theft and protects vulnerable areas of device 4. Secures at 4 corners with provided hardware 5. Will not obstruct GPS signal 6. Secure USB power connection with wire retention 7. Lifetime warranty 8. Made in the U.S.A. Specifications: Material: High Strength Composite Note: *The RAM-HOL-GA61LU was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle. The "U" in the part number reflects product packaged in poly bag. Weight: 0.45 lbs. Special Information: Designed for use with third party EOBR equipment and recording hours of service in compliance with CSA (compliance, safety, accountability) initiative. To learn more visit the Federal Motor Carrier Safety Administration (FMCSA) website. For more information about Garmin Commercial Solutions and PND-based Mobile Resource Management (MRM) Solutions, visit the Garmin website.

RAM Cradle Holder for the Garmin dezl 560LMT & 560LT This RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic and mini USB Patent pending roller design for super smooth placement and removal of the GPS Custom pocket for factory dock Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700 The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.   Features: Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible Locks the device in place so it cannot be removed without the use of tools Made of high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8-32 x 5/8" Machine Screws (2) #8-32 Nylock Nuts (2) 4" Cable Ties Specifications: Hole Pattern: 2-Hole AMPS: 1.912" Materials: High Strength Composite Weight: 0.35lbs

This RAM high strength composite cradle is designed to hold the following devices: Garmin nuvi 200w Garmin nuvi 205w Garmin nuvi 250w Garmin nuvi 255w Garmin nuvi 260w Garmin nuvi 265wt Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder for Garmin Montana® Series This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 220 Garmin GPS 60 Garmin GPSMAP 60 Garmin GPSMAP 60C Garmin GPSMAP 60CS Garmin GPSMAP 60CSx Garmin GPSMAP 60Cx Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. *The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.

RAM Cradle Holder f/Garmin nüvi 50 & 50 LM Part #: RAM-HOL-GA50U This RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 50 Garmin nüvi 50LM Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMT This RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 2557LMT Garmin nüvi 2577LT Garmin nüvi 2597LMT Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Roller design for super smooth placement and removal of the GPS 3. High strength materials ensure product longevity 4. Lifetime warranty Material: High Strength Composite Compatible RAM Components: The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder for the Garmin Rino 610, 650 & 655t This RAM high strength composite cradle is designed to hold the following devices: Garmin Rino 610 Garmin Rino 650 Garmin Rino 655t Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder for the Garmin nüvi 52, 52LM, 54 & 54LM This RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 52 Garmin nüvi 52LM Garmin nüvi 54 Garmin nüvi 54LM Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Patent pending roller design for super smooth placement and removal of the GPS 3. High strength materials ensure product longevity 4. Lifetime warranty Material: High Strength Composite Compatible RAM Components: The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts

RAM EZ-ROLL'R Cradle f/SPOT Gen3 This RAM high strength composite cradle is designed to hold the following devices: SPOT Gen3 Features: Open access to all electronic ports Patented roller design for super smooth placement and removal of the SPOT Gen3 Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Lifetime warranty Made in the U.S.A. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

This RAM high strength composite cradle is designed to hold the following devices: Garmin Approach G5 Garmin Oregon 200 Garmin Oregon 300 Garmin Oregon 400c Garmin Oregon 400i Garmin Oregon 400t Garmin Oregon 550 Garmin Oregon 550t Garmin Oregon 600 Garmin Oregon 600t Garmin Oregon 650 Garmin Oregon 650t Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Patent pending roller design for super smooth placement and removal of the GPS 3. Form fitted cradle supports and protects device without vibration 4. High strength materials ensure product longevity 5. Lifetime warranty 6. Made in the U.S.A. Material: High Strength Composite

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 320 Garmin GPSMAP 62 Garmin GPSMAP 62s Garmin GPSMAP 62sc Garmin GPSMAP 62st Garmin GPSMAP 62stc Material: High Strength Composite

Locking Case f/Garmin dezl™ 770LMTHD The RAM-HOL-GA70LU is a high-strength composite locking case for the Garmin dezl 770LMTHD. RAM has designed a form-fit cradle that supports the device and protects it from vibration. We have also molded in a sun visor to shield the screen and the diamond hole pattern allows the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Locking Case Features: Open access to all electronic ports including speaker, microphone, and SD slots High strength materials ensure product longevity Form fitted cradle supports and protects device without vibration Built in visor prevents glare on screen Integrates the factory Garmin magnetic dock for charging Locks device in place so it cannot be removed without the use of tools Lifetime warranty Made in the U.S.A. Specifications: Material: High Strength Composite The "U" in the part number reflects product packaged in poly bag. Weight: 0.55 lbs.