|
Elastomeric Marine Sealant - 10oz Cartridge - Black
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Elastomeric Marine Sealant - 10oz Cartridge - White
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Elastomeric Marine Sealant - 10oz Cartridge - Clear
A one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
14.28 |
|
|
Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
Sikaflex®-291 is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. Used by many boat builders, its fast cure time makes it ideal for applications where speed is important.
Uses:
General all-purpose, marine adhesive and sealant, which may be used for light duty bonding. Sikaflex®-291 has excellent adhesion to gelcoat, fiberglass, metal and wood that can be gunned or brushed into place.
Characteristics & Advantages:
Use above and below water lineResists salt water
Fast strength build-up
Paintable and sandable
Excellent bond
NSF approved for potable water (black and white only)
USDA approved for incidental food contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.99 |
|
|
Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
Sikaflex®-291 LOT is a 1-component, marine grade polyurethane elastomeric adhesive and sealant. It is a moisture cured, non-sag system designed with a long open time for jobs that require more time.
Uses:
General all-purpose, high strength marine sealant, which may be used for light duty bonding with long open time capability for humid climates or jobs requiring more time that remain permanently elastic.
Characteristics & Advantages:
Use above and below water line
Resists salt water
Paintable and sandable
Excellent bond
NSF approved for potable water
USDA approved for incidental food contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.56 |
|
|
Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
Sikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.
Uses:
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.
Characteristics & Advantages:
Highly elastic and durable
Resistant to aging and weathering exposure
Non-corrosive
Can be sanded and overpainted
NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white)
UL listed for potable water (black, gray, and white)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.60 |
|
|
Silicone Rubber Sealant Cartridge - Black
An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.
|
18.40 |
|
|
LifeSeal® Sealant Cartridge - Black
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.
|
22.19 |
|
|
Life-Calk Cartridge - Black
A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.
*Not compatible with all paints, Sikkens, Cetol, Deks, Olje
WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.99 |
|
|
PP5205 PowerPod Pre-Cut for Raymarine eS127/eS128 - Carbon Black
PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
All PowerPods Include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
471.26 |
|
|
PP4402 PowerPod Pre-Cut for Raymarine e7/e7D - Carbon Black
PP4400 Series, PowerPods are a better option than bracket mounting. PowerPods provide a clean look of flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with marine electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are great for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product.
|
322.90 |
|
|
PP5052 PowerPod Pre-Cut for Raymarine C90W/E90W - Carbon Black
PowerPods are designed for the serious boater who is blasting offshore. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Over 70 Pre-Cut PowerPods are available for all popular manufacturers products. 1.8" opening in the swivel tube provides plenty of room for running wires and connectors through. PowerPods are positioned at a 20 degree tilt back viewing angle.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.
|
445.08 |
|
|
PED4402 PedestalPod Pre-Cut for Raymarine e7/e7D - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
There are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.
|
322.90 |
|
|
Marine Hull Mount Horn - Black
Features:
For vessels under 12 meters (39.4 ft.)
12 or 24 volt DC system
Built-in water evacuation drainage system
|
27.47 |
|
|
FM-S10RB FM Series 10" 400W Flush Mount Marine Subwoofer - Round Grill - Black
Clear audio, clean aesthetics, all-class.
Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion's FM Series flush mount marine subwoofers are designed to deliver high-quality bass to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends.
Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series subwoofers are designed to be flush mounted with a mounting flange no thicker than 3mm [1/8"] for a premium, visually-appealing, near-flat finish.
With an IP65 weatherproof rating, True-Marine™ accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series subwoofers are built to last on board season after season.
Features:
Optimized 2.1 Configuration: When connected with a pair of FM Series speakers and a Fusion Multi-Zone™ stereo with DSP, you have the option of creating a 2.1 audio zone to simplify installation and reduce system cost by adding bass without the need for an external amplifier.
Quality Audio Reproduction: Enjoy quality low frequency audio at any volume level.
Innovative Design Aesthetics: Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel.
Non-Intrusive Mounting System: The FM Series uses 'speaker legs' that keep the subwoofer in place without creating any screw holes to your vessel.
True-Marine™ Designed and Engineered: Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation.
Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness.
Specifications:
Subwoofer Size: 10"
Peak Power: 400W
RMS Power Rating: 120W
Efficiency (1W/1M): 87 dB
Frequency Response: 30 Hz - 2 kHz
Nominal Impedance: 4 Ohms
Recommended Amplifier Power (RMS): 40-300 W/Ch
Cone/Surround Material: Polypropylene with rubber surround
Mounting Diameter Clearance: 269mm (10-9/16")
Mounting Depth Clearance: 140mm (5-1/2")
Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 40L
Operating Temperature Range: 0-50°C (32-122°F)
Storage Temperature Range: -20-70°C (-4-158°F)
Water and Dust Resistance (IPX rating): IP65
Warranty: 3 Years
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
251.99 |
|