xSonic TM185HW Wide-Beam Chirp Tramsom Mount Transducer - 9-Pin
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers
A unique property of the new high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & temperature
150-250 kHz H frequency
Urethane Housing
1 kW
Wide 25° beam
Weight: 0.45 kg (1.1 lb)
Hull Deadrise: 2° to 20°
Acoustic Window: Urethane
|
975.18 | |
xSonic TM150M Transom Mount Transducer - 9-Pin 10M Cable
As CHIRP continues to re-define recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The TM150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.
*Depths vary depending on target strength and sea conditions
This is a Transom Mount model in the CHIRP product line. The TM150M is an excellent choice for freshwater fishers, and CHIRPS across the following bandwidth: Medium Frequency 95-155 kHz. Designed for smaller boats up to 25'.
Features:
Depth and water temperature sensor
300W
Plastic Housing
Ideal for inshore or coastal fishing in shallow to medium depths
Freshwater anglers will see fish holding close to structures and suspended fish
Track bottom at higher boat speeds
More coverage under your boat delivers wider archesand 26° to 17° beamwidths
Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer
Hull Type: Fiberglass, wood or metal
1 internal ceramic
|
289.30 | |
B285HW Bronze 1kW Wide Beam Chirp Thru-Hull Transducer
Requires Mix and Match Cable
Get more coverage under the boat with Airmar's wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the single band, wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers
A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & temperature
150-250 kHz High frequency
Bronze housing
1 kW
Wide 25° beam
Exclusive Xducer ID® technology
Boat Size: Up to 9M (30')
Specifications:
Hull Deadrise: Up to 24°
Acoustic Window: Urethane
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1379.66 | |
TM185C-HW High Frequency Wide Beam CHIRP Transom Mount 14-Pin Transducer for Humminbird
Get more coverage under the boat with Airmar's wide beam Chirp. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, this transducer is truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using this wide beam transducer will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers.
A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display.
Features:
CHIRPS across the following bandwidths: — High-Frequency: 150-250 kHz
25° Constant Beamwidth
1kW (1,000 Watt) RMS Power
Depth Range: 600'-800'
Depth & fast-response water-temperature sensor
Urethane housing and stainless steel kick-up mounting bracket
Boat Size: 8 m to 12 m (25' to 40')
Boat Type: Outboards; I/O
Hull Type: Fiberglass, Wood, Metal
Can retrofit to existing TM258, TM260, TM265, and TM275 bracket
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1301.93 | |
xSonic P319 Plastic Low Profile TH 50/200 9-Pin 600W Connector - 10M Cable
The P319 is a compact, plastic, thru-hull, dual-frequency (50/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats.
Depth/Temperature
Requires just one hole in the hull to receive data for both depth and temperature
Dual Frequency
Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate
Provides extremely accurate data
Low Profile
Just 5mm extends outside of the hull
Specifications:
Frequency: 50/200 kHz
Power Rating: 600W
Speed Sensor: No
Temperature Sensor: No
Mounting Style: Plastic Thru-Hull
Elements: 1
Beamwidth @ -3dB: 45 (50 kHz) 12 (200 kHz)
|
166.19 | |
xSonic B275LH-W Wide Beam CHIRP, 1 kW, 9 Pin Connector
Get more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CHIRP transducers.
A unique property of the high frequency transducers is that the beambwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features
Depth & Temperature
42-65 kHz Low Frequency
150-250 kHz High Frequency
Bronze
1 kW
9 Pin Connector
Fairing Block Included
Wide 25° Beam
|
2135.89 | |
xSonic R509LH-W Thru-Hull Wide-Beam CHIRP w/Fairing Block
Get more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.
Features:
Depth & fast response water-temperature sensor
CHIRPs across the following bandwidths:
Low Frequency 28 to 60 kHz
High Frequency 150 to 250 kHz
25 internal Broadband Ceramics
Epoxy housing with stuffing tube and high-performace fairing
Boat size: 12M (40’)
Hull Type — Fiberglass, Wood, Metal
Can retrofit to existing R209 install
Exclusive Xducer ID® technology
Specifications:
Hull Deadrise: 0° to 25°
Acoustic Window: Epoxy/urethane
Weight: 20.8kg (46lb)
|
4456.65 | |
xSonic B150M Thru-Hull Transducer - 9-Pin 10M Cable - 0°
As CHIRP continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The B150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.
*Depths vary depending on target strength and sea conditions
A tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS across the following bandwidth: M Model - Medium Frequency 95-155 kHz
Features:
Depth and water temperature sensor
300W
Bronze Thru Hull
0° tilt
Ideal for inshore or coastal fishing in shallow to medium depths
Freshwater anglers will see fish holding close to structures and suspended fish
Track bottom at higher boat speeds
More coverage under your boat delivers wider archesand 26° to 17° beamwidths
Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer
Hull Type: Fiberglass, wood
1 internal ceramic
|
368.44 | |
xSonic P79 Adjustable 200/50kHz Plastic In-Hull Transducer - 9-Pin
This entry level in-hull transducer with an adjustable deadrise angle makes installation a snap.
The 9-pin 600 W transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 22 degree deadrise.
Transducer kit comes with installation instructions*. Follow the instructions carefully to avoid damaging your boat.
*Fiberglass should be no more than 5/8" thick
*Not recommended for cored hulls
|
122.22 | |
xSonic SS60 Stainless Steel 20° Tilt Thru-Hull Depth/Temp Transducer - 9-Pin - 10M Cable
The SS60 is a stainless steel, thru-hull, tilted, dual-frequency, depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Features:
Depth/Temperature - Calculates how deep the water is, so that you can avoid running aground, whilst also incorporating a temperature sensor for accurate water temperature readings
Easy To Install
Dual Frequency - Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate - Provides extremely accurate data
20° Tilt - The 20° tilt is ideal for boats with a 16° to 24° hull deadrise
Low Profile - The low profile housing minimizes drag with just 5mm extending outside of the hull
Plug & Play Connection - Easily connect to NSSevo3, Lowrance HDS G3
|
403.61 | |
Navico Mix & Match Cable for Low-Frequency CHIRP Transducers - 9-Pin
Specifically for use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000W).
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
114.00 | |
xSonic M135M Medium Chirp 1 kW In-Hull Transducer - 9-Pin
The M135M’s medium frequency delivers the right combination of coverage under the boat, an extended depth range, and the ability to produce clean and accurate target and structure returns in mid- to deeper water. Medium frequency also delivers excellent shallow to mid-depth performance, bottom detail, and fish-target separation. Operating at a frequency range of 85 to 135 kHz, this transducer reveals fish at medium depths up to 457 m (1500 ft) and gives ultra-clear target resolution.
Airmar’s M135M includes a plastic mounting base that is aligned with the centerline and secured inside the hull. Then it is filled with non-toxic antifreeze. The transducer is inserted into the base and adjusted for the proper deadrise offset, ensuring the beam is shooting straight down for maximum echo returns. The eco-friendly coolant is the best medium to transmit through solid fiberglass and into the surrounding water. The major benefit of an in-hull transducer is that there are no protruding features on the exterior of the hull, making it the perfect choice for trailered or lifted boats. Designed for smaller boats up to 11 m (36') with a solid fiberglass hull.
Features:
Depth only
1 kW of power
50 kHz of total bandwidth from one transducer
Recommended for use on planing and displacement hulls
Plastic transducer and mounting base
Covers popular fishing frequencies of 88 and 107 kHz plus everything else in the bandwidth
Also available as transom (TM185M), thru-hull low-profile (B175M), and thru-hull with fairing (B285M) mounts
Patented Xducer ID® technology
Specifications:
Medium frequency: 85 to 135 kHz
Beamwidth: 16 degrees to 11 degrees
Maximum Depth: 457 m (1500 ft.)
Weight: 4.2 kg (9.2 lb.)
Recommended Boat Length: Up to 11 m (36 ft.)
Hull Material: Solid fiberglass only
Hull Deadrise: Up to 22 degrees
Acoustic Window: Urethane
Transducer Element: One broadband ceramic assembly
Includes: Adjustable mounting base
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
809.66 | |
TM275C-LHW 1kW Chirp Transom Mount Transducer
Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'.
The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage.
Features:
Depth and fast-response water-temperature sensor
1 kW for great deep water performance from the low frequency
Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000') 25° to 16° beamwidth
High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500') 25° constant beamwidth
123 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and fish target separation
High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column
Transom-mount transducer with stainless steel mounting bracket
Recommended boat size: up to 10 m (32')
Hull Type: Fiberglass, wood, aluminum or steel
Exclusive Xducer ID® technology
Mix and Match Cable Required
Specifications:
Weight: 4 kg (8.9 lb)
Transom Angles: 3° to 21°
Acoustic Window: Urethane
Urethane transducer housing with stainless steel bracket
Eight internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1781.26 | |
Airmar B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT f/Simrad, Lowrance & B&G B117 Traditional/CW Thru-Hull 50/200kHz, 600W, Transducer, 9-Pin, DT for Simrad, Lowrance & B & G
The B117 features a 50/200 kHz, dual-frequency, single, ceramic element in a low-profile bronze housing. The nearly-flush design minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth only or depth and temperature
600 W
Dual-frequency element: 50 kHz with a wide 45° beamwidth for performance to 353 m (1,200'), 200 kHz with a 12° beamwidth for performance to 206 m (700')
Right-angle cable exit saves space and protects the transducer if stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Low-profile, bronze housing has minimal drag
Plastic P319 and stainless steel SS60 models are also available to accommodate all hull materials and deadrise angles
Specifications:
Weight: 0.9 kg (2.0 lb.)
Recommended Boat Length: Up to 8 m (25')
Hull Material: Fiberglass or wood
Hull Deadrise: Best performance through 7°. Can accommodate up to 12°.
Acoustic Window: Urethane
Hole Diameter: 51 mm (2")
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
288.35 | |
PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket/Keel Mount - No Connector
Get more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.
The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').
The low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.
Features:
The depth and fast-response water-temperature sensor
2 kW of power for great deep-water performance from the low frequency
2 kW low frequency: 38 to 75 kHz
19° to 10° port-starboard beamwidth
10° to 5° fore-aft beamwidth
Maximum depth of 1,829 m (6,000')
1 kW high frequency: 150 to 250 kHz
25° constant beamwidth
Maximum depth of 152 m (500')
137 kHz of total bandwidth from one transducer
Covers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth
High frequency delivers superior shallow-water performance, bottom detail, and fish-target separation
High wide beamwidth yields more coverage for detecting fish in the upper-water column
Urethane housing designed for custom mounting in a cavity
Also available in an external (R109LHW) mount
Exclusive Xducer ID® technology
Specifications:
Weight: 13.6 kg (30 lb.)
Recommended Boat Length: 12 m (40') and above
Hull Material: Solid fiberglass only
Hull Deadrise: Accommodates any deadrise angle based on custom cavity construction
Acoustic Window: Epoxy/urethane
Transducer Element: 16 internal broadband ceramic assemblies
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
3235.97 | |