DFF3D Multi-Beam Sonar for NavNet TZtouch & TZtouch2 Turn your NavNet TZtouch or TZtouch2 MFD into a multi-beam sonar that can see 120-degrees port to starboard, allowing you to see the depth and direction fish schools are moving, while displaying the seabed condition in real time. The DFF3D gives you real-time 120 port-starboard view of the water column and seabed in over 650 feet. The DFF3D allows you to explore fishing spots and find fish in deep water far faster than conventional single beam sounders. The main beam penetrates right under the boat at a depth of over 1,000 feet, depending on water conditions. Installation is made easy thanks to a compact transducer design. The built-in motion sensor in the transducer stabilizes the display to give clear and stable images, even under rough sea conditions. Cross-Section displays the real-time sea column echo in 120 degrees port and starboard. This mode aids in instantly understanding the distribution of bait fish and water column conditions. The 3D Sounder History provides an intuitive and easy-to-understand 3D image of the seafloor, along with fish school icons. This mode is useful in a variety of situations, such as selecting fishing hotspots and assessing the seabed condition. A single (directly under the boat) or triple-direction (middle, left and right) fish finder image can be displayed. The triple beam display helps to understand the depth of fish targets and the seabed condition in each direction, as well as the direction target fish are moving. Each beam angle and beam width are selectable. Side scan clearly displays the shape of structure as a high definition image in port and starboard direction. It is suitable for searching the seabed and understanding sea floor structure. Features: Sidebar detection range is over 650 ft (200 m) in a 120-degree swath port and starboard direction Deep water, main beam penetration directly under the boat is over 1,000 ft. (350 m), depending on water conditions Rich set of menus in each display mode The built-in motion sensor (standard supply) stabilizes the display to give clear and stable images even under rough sea conditions Thru-hull or Transom mount transducers available Customize the display according to your needs - Depending on the situation and preference, a combination of screen modes can be displayed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MCU004 Remote Control for NavNet TZtouch & TZtouch2 Furuno's NavNet TZtouch and TZtouch2 Multi Function Displays have become widely utilized on a variety of helms and bridges. To enhance the various installations, Furuno has developed the MCU004, a versatile remote control unit that can be used with TZtouch and TZtouch2 units. The MCU004 Remote Control features a large rotary knob and joystick, which can be utilized as the RotoKey on NavNet TZtouch and for zooming in/out on both TZtouch and TZtouch2. In addition, the joystick allows you to pan around the chart and move the cursor on the screen. The remote also has dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. For those captains that have multiple TZtouch or TZtouch2 displays on their helm or bridge, a single MCU004 can control all of the displays. With a simple press of the Active Display Button, you can switch from one display to another. The MCU004 Remote Control is a perfect companion for any helm or bridge. Whether you are using the TZtouch Black Box and want to mount the MCU004 in the arm of the captain_s chair, or you have a center console and want to have a remote on the transom while you are fishing, the MCU004 is an ideal solution. Features: Rotary knob as well as a joystick to take the place of the RotoKey Allows users to zoom in and out Joystick functions like a mouse allowing users to move the cursor on the MFD screen Buttons for Edge Swiping, Home, MOB and more Single MCU004 can control multiple TZtouch and TZtouch2 displays Allows for toggling back and forth from one display to another WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DRS2DNXT 19" Solid-State Doppler Radar with Target Analyzer & Fast Target Tracking for NavNet TZtouch, TZtouch2 & TZtouch3 - LESS CABLE The NXT Step with Doppler Radar Technology The Furuno NXT Radar is the next step in Radar evolution; a Solid-State Radar with pulse compression, Target Analyzer™, and Fast Target Tracking™ utilizing Doppler technology. Combined with FURUNO exclusive RezBoost™ technology for beam sharpening, NXT packs the performance of a larger Radar in a more compact package. Target Analyzer Function Utilizing Doppler Technology NXT was the first Radar in the world to use the Furuno exclusive Target Analyzer™ function, where targets that are approaching your vessel automatically change color. Green targets are targets that stay stationary or are moving away from you, while red targets are moving towards your vessel. Target Analyzer™ works independently of vessel speed, both your own vessels and target vessels, with minor limitations. Echoes dynamically change colors as targets approach, or get farther away from your vessel. Target Analyzer™ can increase safety, as well as improve situational awareness. Fast Target Tracking Once a target has been selected, a speed and course vector is displayed in seconds. With accurate tracking information, estimation of other vessels' course and speed is greatly simplified. With Doppler technology, any vessel approaching yours will automatically display a target vector, as well as sound an alarm. RezBoost™ Beam Sharpening For the first time, Furuno's exclusive RezBoost™ technology is used in one of our Radar units, with impressive performance. With RezBoost™ set to MAX, the sharpness of a 2-degree beam width can be achieved. Specifications" Antenna Size: 19" Antenna Type: Radome Band: X-Band Beam Width: 5.2 Degrees Power Usage: 12-24 VDC Power Output: 25W Range: 48nm SIGNAL/POWER CABLE IS AN ACCESSORY This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TZ Professional DFF3D Module - Requires PBG Module Map the seafloor of your fishing area in just a few passes. 50 depth points per second, your time has never been so valuable!  Instead of spending hours gathering PBG recordings, you can now collect PBG recordings in just a few sweeps. By adding the optional DFF3D Module together with the PBG Module to your TZ Professional software, you can connect this Furuno Multi-Beam Sonar to your computer and unlock powerful integration features. The DFF3D Sonar is the first entry level Multi-Beam Sonar able to reliably create PBG up to 200 meters. This data is sent directly to TZ Professional and used to create a highly-detailed PBG map faster than ever before. The DFF3D is a MultiBeam sonar. It allows you to use features such as Down Sounder, Port and Starboard Sounder, Real time wide angle A-Scope (Section), Fish Target History (Water Column) and Side Scan Sonar. The DFF3D can generate up to 50 depth points per second. To put this into perspective, 300 football fields can be covered in less than 20 minutes with the DFF3D! TZ Professional (with the optional PBG and DFF3D modules) can be connected to the new Furuno DFF3D Multi Beam sonar. Creating your bathymetric (PBG) map becomes as fast as ever with TZ Professional. Multiple beams are constantly sent out by the sonar returning quality information for each depth point. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  New Product Preview Including 3D Multi-beam Sonar & Radars For NavNet TZtouch & TZtouch2     The Miami Boat show marks the opening of an event that each year continues to set the tone for the recreational boating industry. Furuno would like to introduce the boating public to some exciting new products. We'd like to provide you with a preview of the upcoming products. The star of this year's show for Furuno is certain to be the all-new DFF3D Multi-beam Sonar. We're proud to bring 3D underwater viewing and side-scanning capabilities to our flagship NavNet TZtouch and TZtouch2 MFDs, with this all-new DFF3D black box module. This Multi-beam Sonar takes the highly-desired ability to scan port to starboard under the vessel and ups the ante by displaying unique 3D Sounder History that presents a very intuitive three-dimensional image of the seafloor, along with icons depicting fish distribution. This mode is extremely useful for locking-in on fishing hot spots and assessing the seabed condition. Leveraging Furuno's unique commercial fisheries experience and technology, the DFF3D delivers a sidebar detection range of an unprecedented 650+ feet, while also seeing down to over 1,000 feet, possibly making it the only Sounder many fishermen will need! The DFF3D is scheduled to begin shipping later this spring and will initially be paired with an all-new, motion stabilized multi-beam, thru-hull transducer. Additional transducer options, including a transom mount version, will be available later in the year. Please take a few moments to check out the videos below and accompanying DFF3D brochure that will introduce you to the many features, abilities and benefits of this revolutionary new fishing machine from Furuno!         Enhancing NavNet TZtouch and TZtouch2 sensor options doesn't stop with the DFF3D Multi-beam Sonar. Furuno's already extensive and award-winning DRS family of ultra-high definition Radar sensors is expanding. With the 2016 introduction of the DRS6AX X-Class Radar, Furuno raised the bar on performance for traditional X-Band recreational Radar. Now, we're moving that bar up a couple more notches with two new, high-power X-Class Radar options for NavNet TZtouch and TZtouch2, the DRS12AX and DRS25AX. These two new Radars not only deliver incredibly high performance and useful features, but do so at an extremely competitive price. Scheduled to commence delivery this spring. As with other open array DRS Radars, these new models can be paired with a number of antenna options, ranging in size from 3.5 to 6 feet. Check out the below video on the newly expanded line of X-Class Radars, and download updated brochures for NavNet TZtouch and TZtouch2, which now include product info for these new Radars and the DFF3D Multi-beam Sonar.     In addition to new Sonar and Radar options, NavNet TZtouch2 MFD's will soon provide extensive and valuable data to owners of Yamaha's most popular outboard engines. Furuno is one of the first manufacturers to integrate an MFD with Yamaha Engines, to display gauges and other important information. Furuno collaborated closely with Yamaha to create the interface, while designing the gauges to emulate Yamaha's familiar look and feel. NavNet TZtouch2 interfaces with Yamaha's Helm Master®, Command Link® and Command Link Plus® to bring engine data across the network. This marriage of helm navigation and engine data places all of this critical information at the operator's fingertips, making TZtouch2 a truly turnkey solution for many boats. While this integration will require the purchase of an inexpensive gateway module from Yamaha, the availability of this data on a TZtouch2 MFD will be a no-cost upgrade for customers, as it will be incorporated into an upcoming TZtouch2 software update, coming this spring. While there will be a formal introduction when the software update becomes available, you can get more detailed info on this exciting integration between TZtouch2 and Yamaha engines by reviewing the product brochure.     Yamaha Engine Gauges on TZTL15F MFD   The new product excitement is not only confined to NavNet TZtouch and TZtouch2. Furuno is also pleased to be premiering our latest standalone Radar model, the all-new 1815 Color LCD Radar. The Furuno 1815 assembles some of the very best features of our latest commercial and network models, presenting them in a compact and durable standalone Radar package that includes a stylish, low-profile 4kW Radome antenna, packaged with an 8.4" color LCD display that is a cosmetic match to the extremely popular FCV588 Fish Finder.   The 1815 is designed for a wide variety of vessels, including pleasure craft, workboats and small fishing boats that require an easy-to-use, true color Radar, at an affordable price point. This compact Radar incorporates many of Furuno's latest Radar features, including Furuno's Fast Target Tracking (TT) function, which allows the user to manually or automatically track up to 10 targets. In addition to TT, the 1815 can also display up to 100 AIS targets, when interfaced with an AIS Receiver and applicable sensors. Another useful feature is Furuno's proprietary True Trail mode. With True Trails, moving objects will show a gradation trail of the target in their wake, making it possible to gauge the directional movement of targets at a glance. These features, combined with Furuno's unique True View mode, make reading the display easier and more intuitive, even for novice navigators. The full-featured 1815 Radar will be a very economical upgrade for boaters. For more specific details on the all-new 1815 compact, standalone Radar, be sure to check out the 1815 product brochure.     As you can see, Furuno is going to provide our mutual boating customers with a number of new product surprises. To see these products in action, we trust this New Product Preview will provide you with the latest and greatest info on these upcoming offerings. All Furuno products can be purchased at CLR Marine our Authorized Furuno Reseller.      Specials   Closeouts    Remanufactured    Rebates  

    Unleash the power to see fish clearer, deeper & on both sides of your boat, with unprecedented clarity. Features built-in dual-channel 1kW TruEcho CHIRP™, 2kW/3kW TruEcho CHIRP™ "Deep Impact" power booster, DFF3D Multi-Beam sonar, Hi-Power radar with bird detection mode, premium fishing, and CMOR charts, and much more!     Go on a POWER TRIP with the most powerful MFD series available. Hybrid 9" and 12" display with RotoKey™ and buttons for added accessibility. Large 19" and 16" multi-touch IPS display for maximum brightness.         The NavNet FAMILY has grown even bigger. The latest addition to the growing NXT Solid-State Radar family, the DRS2DNXT delivers all the same capabilities as the larger NXT Radars but does so while housed in a compact 19" Radome, making it the perfect solution for smaller vessels or those desiring a backup Radar with the same features their larger Radar provides.     Specials    Closeouts    Remanufactured    Rebates

165T-50/200-SS260 DFF3D Thru-Hull Combo Transducer Stainless Steel Combination Thru-Hull The 165T-50/200-SS260 includes the DFF3D elements along with 50/200 kHz elements and temperature and motion sensors. It can be connected to the DFF3D Multi-Beam Sonar along with one sounder. These transducers save money and space compared to purchasing and installing two separate transducers. Features: Stainless Steel Thru Hull with high speed fairing block Can be flush mounted in keel without using fairing block DFF3D operating frequency: 165 kHz Built-in motion sensor Built in temp sensor 1kW, 50/200 kHz, 20/6 ° beam angles for sounder elements - the same elements as an Airmar B164 transducer 12M Cables with 10-pin Connector for sounder, 7-pin connector and a pigtail cable for the DFF3D Recommended for a TZtouch2 or a TZtouch/DFF1, and DFF3D installation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 12" MFD with 1kW Dual Channel CHIRP Sounder with Internal GPS Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ Built-in GPS Receiver on TZT12F Hybrid control 12” display with Rotokey™ and buttons for added accessibility DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch and location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 16" MFD with 1kW Dual Channel CHIRP™ Sounder & Internal GPS Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ Built-in GPS Receiver 16” multi-touch IPS displays DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions IPS LCD provides superior viewability from virtually any angle Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch & location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 19" MFD with 1kW Dual Channel CHIRP™ Sounder Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ 19” multi-touch IPS displays DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions IPS LCD provides superior viewability from virtually any angle Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch & location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Thru-Hull Multibeam Transducer f/DDF3D The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch2 Black Box Chartplotter/Fishfinder Total Control, Simply Refined With the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures. Simply Refined, Simply Beautiful Following in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network. Incredibly easy-to-use controller and graphical user interface The optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips. The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. Powerful Fish Finder with built-in Furuno features The built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders. Freedom to build the helm of your dreams NavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems. Remotely view and control your bridge with apps for your smartphone and tablet  Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network. MapMedia Raster and Vector Chart Library Freely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.  Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical data You can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible. Free & easy-to-use marine weather forecasts The weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Simply Touch ...& GO! Furuno NavNet TZtouch New Product at CLR Marine     NavNet TZtouch™ integrates a high-sensitivity, edge-to-edge glass multi touch screen, giving you total control at your fingertips. Navigation is simplified by using your fingertips to zoom and pan around the chart and a variety of other screens. As soon as your fingers touch the display, taps, pinches and swipes are instantly transformed into useful actions and commands. From the standard drag and drop, to custom multi touch gestures that you create, this interface is so easy to understand, you will be up and running in no time. To make operation even easier while underway, FURUNO has incorporated its intuitive RotoKey™ rotary knob, which allows you to make adjustments, such as range and gain, or make menu selections, using either the touch screen or the RotoKey™.      

Furuno Touch Encoder Unit for NavNet TZtouch2 & TZtouch3 - Silver - 3M M12 to USB Adapter Cable Control all aspects of your NavNet TZtouch2 or NavNet TZtouch3 from one simple, stylish Touch Encoder! The TEU001 combines “The Best of Both Worlds” when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKey™ for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control. With a RotoKey™ and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips! This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Touch Encoder Unit for NavNet TZtouch2 & TZtouch3 - Black - 3M M12 to USB Adapter Cable Control all aspects of your NavNet TZtouch2 or NavNet TZtouch3 from one simple, stylish Touch Encoder! The TEU001 combines “The Best of Both Worlds” when it comes to NavNet control. The innovative TEU001B Touch Encoder Unit provides a compact, touch-based interface that emulates the already familiar Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. It also incorporates a beautifully designed RotoKey™ for easy access and tactile control of many common operations, including zoom in/out and quick menu scrolling. The color LCD touchscreen will enhance the look of any dash and provide incredible armchair control. With a RotoKey™ and LCD Touch Screen that supports both single and two-finger tap functions, you can control nearly every function of your NavNet TZtouch2 or TZtouch3 MFD directly from this simple and stylish Touch Encoder. Edge swipe up or down, left or right to access all of your menu options, take advantage of long and short press functions, and zoom and pan your charts - total control of your NavNet TZtouch2 or NavNet TZtouch3 MFD is at your fingertips! This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.