|
xSonic SS75M 20° Tilted Element TH Transducer - 600W - Stainless Steel
The SS75M is a Stainless Steel, thru-hull, tilted, medium-frequency (80-130kHz), depth and temperature transducer. The ceramic element is tilted for built-in deadrise compensation, giving excellent echo returns for more accurate depth readings.
Medium Frequency: CHIRP range is 80kHz-130kHz for good target detail in shallow water and excellent bottom tracking in deep water.
The 20° tilt is ideal for boats with a 16° to 24° hull deadrise.
|
772.92 |
|
|
B60-20 20° Tilted Element Transducer with 6-Pin
The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Features:
Depth/Temp
50/200 kHz
600w RMS
Mid-performance
Bronze
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
336.82 |
|
|
B-60-20 Tilted Element Transducer
Low profile tilted element for 16° to 20° deadrise hulls.
Features:
600 Watts
Dual 50/200kHz
|
378.00 |
|
|
SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin
Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
600 Watts
50/200 kHz
45/12 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
30' Cable with 10-Pin Connector
|
426.67 |
|
|
xSonic B150M 20° TH 9-Pin Connector with 10M Cable
As CHIRP continues to redefine recreational fishing, AIRMAR has expanded the
lineup of broadband transducers to satisfy the growing demand for this game
changing technology. The B150M economical CHIRP transducers designed for
offshore fishing and freshwater anglers. Operating at a frequency range of
95-155 kHz, these transducers reveal fish in shallow, murky waters at medium
depths (up to 2,500 feet*) along with ultra-clear target resolution.
*Depths vary depending on target strength and sea conditions
A tilted element model in the CHIRP Thru-Hull product line, the B150M CHIRPS
across the following bandwidth: M Model - Medium Frequency 95-155 kHz
Features:
Depth and water temperature sensor
300W
Bronze Thru Hull
20° tilt
Ideal for inshore or coastal fishing in shallow to medium depths
Freshwater anglers will see fish holding close to structures and suspended fish
Track bottom at higher boat speeds
More coverage under your boat delivers wider archesand 26° to 17° beamwidths
Cover the medium frequency range-CHIRPS from 95-155kHz to provide 60kHz of total bandwidth from one transducer
Hull Type: Fiberglass, wood
1 internal ceramic
|
368.44 |
|
|
xSonic P319 Plastic Low Profile TH 50/200 9-Pin 600W Connector - 10M Cable
The P319 is a compact, plastic, thru-hull, dual-frequency (50/200 kHz) sensor that offers depth and temperature data. Ideal for planing hull powerboats and sailboats.
Depth/Temperature
Requires just one hole in the hull to receive data for both depth and temperature
Dual Frequency
Works at 50 kHz and 200 kHz for good target detail in shallow water and excellent bottom tracking in deep water
Highly Accurate
Provides extremely accurate data
Low Profile
Just 5mm extends outside of the hull
Specifications:
Frequency: 50/200 kHz
Power Rating: 600W
Speed Sensor: No
Temperature Sensor: No
Mounting Style: Plastic Thru-Hull
Elements: 1
Beamwidth @ -3dB: 45 (50 kHz) 12 (200 kHz)
|
166.19 |
|
|
B60 Tilted Element™ 20°
20° titled version is designed for 16° - 24° deadrise angles
The bronze B60-20° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.
Features:
Depth/Temp
50/200 kHz
600w RMS
Mid-performance
7 Pin Blue Connector
Bronze
|
348.71 |
|
|
xSonic Bronze 20° HDI Transducer Thru Hull 50/200 455/800 with 9 pin connector and 10M Cable
Bronze Hybrid Dual Imaging™ (HDI) tilted element thru hull transducer
Provides 50/200kHz traditional frequencies PLUS 455/800kHz Down Scan Imaging plus temperature
20 degree tilt
10M Cable
Beam Width: 50kHz @ 45°, 200kHz @ 11° 455kHz- Fore to aft 2.8°, Port to starboard 56°, 800kHz Fore to aft 1.6° Port to starboard 32°
|
456.37 |
|
|
B164 12 degree 1kW Tilted Element
Step up to a 1kW-Without a Fairing! Airmar has taken our innovative Tilted
Element™ technology to a higher power. The new 1kW, flush-mount, tilted
element transducers are perfect for fast, trailered tournament sport fishing
vessels who cannot have a high-performance fairing. The flush mounted,
bronze housing protrudes less than 6.35 mm (0.25") outside your hull and can
sit on trailer rollers and bunks with no damage at all. The ceramic arrays
are tilted inside the housing giving you the perfect vertical beam with
maximum energy on what is directly below your boat. Take your fishfinder to
the next power with 1kW tilted element transducers.
12 degree tilted version for 8 to 15 degree hull deadrise
Compatible with Lowrance HDS Series and Simrad NSE Series Multifunction Display units.
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
7 pin Blue Connector
Bronze
12 degree
|
1140.00 |
|
|
xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector
SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.
*This Transducer is designed for smaller boats up to 36 feet (11 m).
Features
Frequencies: 130-210 kHz @ 25° constant beamwidth
16° - 25° Deadrise
300m+ Usable Depth
6m+ or large Boat size with Steel or Aluminum hulls
Depth & Temperature
CHIRP Technology
High-Performance
Stainless Steel
Exclusive Transducer ID
9-Pin Connector, 10M Cable
|
1458.80 |
|
|
B175MW Med Ultra Wide 20°, 1KW Chirp Thru-Hull Transducer with 8-Pin Connector for Garmin
Airmar’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Features:
Fixed 20° tilted version for 16° to 24° hull deadrise
8 Pin Connector for Garmin FishFinders
Depth and fast-response water-temperature sensor
1 kW with depth tracking down to 400 m (1,300#39;)
Medium frequency: 60-100 kHz
57° to 73° beamwidth (port/starboard)
16° average fore/aft
40 kHz of total bandwidth from one transducer
Medium frequency for superior mid-depth performance and excellent fish-target separation
Bronze housing for use on stepped, planing, or displacement hull
Low-profile, thru-hull housing yields good resolution at speed when installed properly
Exclusive Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 9 m (30'), 10 m (33')
Common Use: Fishing
Connector: Garmin 8-Pin
Country of Origin: USA
Display Connector: 8G
Functions: Depth, Temperature
Hole Size: 95 mm (3-3/4")
Hull Material: Fiberglass or wood
Material: Bronze
Max Deadrise Angle: 24°
Max Depth: 400 m (1300')
Max Vessel LOA: Up to 11 m (36')
Medium Frequency: 60-100 kHz
Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft)
Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a
Mounting Style: Tilted Element Thru-Hull
Power Rating: 1 kW
Single or Dual Frequency: Single
Tilt Angle: 20°
Tilted Element: Yes
Water Temperature: -10° to 40°C (14° to 104°F)
Weight: 2.7 kg (6 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1742.39 |
|
|
B175MW Med Ultra Wide 1kW, 20° Chirp Thru-Hull Transducer f/12-Pin Garmin175MW Med Ultra Wide 20 Degree, 1KW Chirp Thru-hull Transducer with 12 Pin Connector for Garmin
Airmar's innovative transducer designs have revolutionized the fishing world, and they continue to do so with the Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column.
Airmar’s Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60-100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow.
The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20° angle. Because the transducer is installed almost flush with the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer.
Features:
Fixed 20° tilted version for 16° to 24° hull deadrise
12 Pin Connector for Garmin FishFinders
Depth and fast-response water-temperature sensor
1 kW with depth tracking down to 400 m (1,300#39;)
Medium frequency: 60-100 kHz
57° to 73° beamwidth (port/starboard)
16° average fore/aft
40 kHz of total bandwidth from one transducer
Medium frequency for superior mid-depth performance and excellent fish-target separation
Bronze housing for use on stepped, planing, or displacement hull
Low-profile, thru-hull housing yields good resolution at speed when installed properly
Exclusive Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 9 m (30'), 10 m (33')
Common Use: Fishing
Connector: Garmin 12-Pin
Country of Origin: USA
Display Connector: 12G
Functions: Depth, Temperature
Hole Size: 95 mm (3-3/4")
Hull Material: Fiberglass or wood
Material: Bronze
Max Deadrise Angle: 24°
Max Depth: 400 m (1300')
Max Vessel LOA: Up to 11 m (36')
Medium Frequency: 60-100 kHz
Medium Frequency Beamwidth: 57° to 73° (Port/Starboard) X 16° average (Fore/Aft)
Medium-Wide Beamwidth: 57° to 73° beam p/s 16° average f/a
Mounting Style: Tilted Element Thru-Hull
Power Rating: 1 kW
Single or Dual Frequency: Single
Tilt Angle: 20°
Tilted Element: Yes
Water Temperature: -10° to 40°C (14° to 104°F)
Weight: 2.7 kg (6 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1742.39 |
|
|
B164 Tilted Element™
20°
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kWWithout a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1061.33 |
|
|
B164 Tilted Element™
20 degree titled version is designed for 16 degree - 24 degree deadrise angles.
for use with Raymarine DSM250, DSM300 sounder modules
Features:
Depth/Temp
50/200 kHz
1 kW RMS
High-performance
Bronze
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers.
|
1187.22 |
|
|
B175H-W 1KW Bronze Thru Hull 20° Tilted Element
Installation: Thru Hull
Material: Urethane
Power (RMS): 1kW
Max Depth(ft): 800
Frequency (KHz): 150-250
Records: Depth and Temperature
Approved Hull Material: Fiberglass / Wood
Cable Length (ft/M): 6ft/2m
Supported deadrise: 16-24° Deadrise
ADDITIONAL NOTES: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10m Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.
|
1565.21 |
|