Transom Mount Speed Sensor Transom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector. Features Replaces EP-70 Outputs speed through water Transom-mount paddle wheel Ideal for slow, trolling speeds, where GPS is not as accurate Share paddle wheel speed to any networked display, unlike sonar based paddlewheel sensors

xSonic TM150M Transom Mount Transducer - 9-Pin 10M Cable As CHIRP continues to re-define recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. The TM150M economical CHIRP transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution. *Depths vary depending on target strength and sea conditions  This is a Transom Mount model in the CHIRP product line. The TM150M is an excellent choice for freshwater fishers, and CHIRPS across the following bandwidth: Medium Frequency 95-155 kHz. Designed for smaller boats up to 25'.   Features:  Depth and water temperature sensor 300W Plastic Housing Ideal for inshore or coastal fishing in shallow to medium depths Freshwater anglers will see fish holding close to structures and suspended fish Track bottom at higher boat speeds More coverage under your boat delivers wider archesand 26° to 17° beamwidths Cover the medium frequency range-CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer Hull Type: Fiberglass, wood or metal 1 internal ceramic

xSonic TM185M Transom Mount Transducer As Chirp continues to redefine recreational fishing, AIRMAR has expanded the lineup of single band transducers to satisfy the growing demand for this game changing technology. The TM185M, an economical Chirp transducer, is designed for offshore fishing and freshwater anglers. Operating at a frequency range of 85-135 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 1,500 feet*) along with ultra-clear target resolution. Designed for smaller boats up to 25’, the TM185M is available as a transom-mount transducer. Features: Depth & Temperature Chirp Technology 1 kW High-Performance Urethane Housing Exclusive Transducer ID® Weight: 0.45 kg (1.1 lb) Hull Deadrise: 2° to 20° Acoustic Window: Urethane

Bike Speed Sensor 2 & Cadence Sensor 2 Bundle Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology.  With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DX900+ Multilog Smart™ Electromagnetic Speed Sensor Thru‑Hull NMEA 0183 Say goodbye to the paddlewheel and hello to Smart® Sensor technology. The DX900+ uses electromagnetic technology to accurately measure dual-axis speed through water plus immediately calculate leeway travel. Paddlewheels need cleaning and only measure speed longitudinally. The DX900+ measures water flow at 360° and will immediately deliver the leeway data to your instrument. There are no moving parts to clean or maintain. Performance sailors, racers, or long-distance cruisers will immediately see the benefits of the accuracy and reliability of the DX900+. The DX900+ is available as a Speed and Water-temperature sensor. Features: Electromagnetic dual-axis speed, and water temperature with no moving parts Measures transverse and longitudinal speed that instantaneously calculates leeway angle and speed through water with no latency Connects and shares data wirelessly with AIRMAR’s CAST™ app. Perfect for displaying performance data on phones or tablets, plus makes calibration fast and easy. Outputs heel and trim The sensing pins in contact with the water are made from very high-quality alloy, allowing very stable measurements and high resistance to corrosion. (Do not use any bottom paint on exposed sensing pins.) Thru-hull, low-profile housing with water valve Retractable insert for safe storage Available in a plastic (P717V) or stainless steel (SS617V) housing Retrofits to existing P617V housing Specifications: Weight (sensor, box, and cable): Plastic—1 kg (2.3 lb.) Stainless steel—2 kg (4.4 lb.) Hull Material: Plastic housing for fiberglass or metal hull/Stainless steel housing compatible with all hull materials Deadrise Angle: Up to 22° Hole Diameter: Fiberglass or wood—51 mm or 2", Stainless steel housing in metal hull—57 mm or 2-1/4" Transverse Speed Range: ±6 knots Longitudinal Speed Range: ±60 knots Accuracy of Transverse and Longitudinal Speed: ±0.1 knots for speeds under 10 knots, ±1% for speeds above 10 knots Display Resolution: 0.01 knots Outputs: NMEA 0183—speed and temperature Configurable Data Update Rate: Up to 10 Hz Operating Temperature Range: -15°C to 55°C (5°F to 131°F) Water Temperature Accuracy: +0.5°C (+1.0°F) Power: Supply Voltage: 9 to 16 VDC Average Power Consumption: NMEA 0183 - 2.5 W Standard Cable Length: NMEA 0183 - 6M (20') Includes: Blanking plug CE Compliant: Yes to IEC60945 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

EP-80R Temperature Sensor -NMEA2000 Transom Mount Replaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following temperature types: Outside Inside Engine Room Cabin Live Well Bait Well Refrigeration Heating System *can only be controlled/configured on Navico MFDs

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz This kit combines Simrad’s GO9 XSE Chartplotter/Fishfinder with Navico’s 9-Pin High-Speed Skimmer Transducer. Simrad GO9 XSE Chartplotter/Fishfinder with C-MAP Discover Chart  GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz & HALO20 Package This kit combines Simrad’s GO9 XSE with Navico’s 9-Pin High-Speed Skimmer Transducer and Simrad’s HALO20 20" Radar Dome. Simrad GO9 XSE Chartplotter/Fishfinder w/C-MAP Discover Chart GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector Simrad HALO20 20" Radar Dome with 10M Cable Unrivalled Short-To-Mid-Range Performance Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection but provides precise target definition with minimal clutter. Better Situational Awareness, Collision Avoidance HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets, or 20 in dual range. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings. Ready Instantly HALO20 Radar wakes instantly from its low-power standby mode, delivering radar coverage exactly when and where you want it. Even if your HALO20 radar is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar. Easy to Use Harbor, offshore, weather, and custom modes tune HALO20 Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions. Features: 10W Pulse Compression 24 nm range from a compact 20-inch dome Unrivalled short range Radiation safe Easy operation with harbor, offshore, and weather mode MARPA target tracking InstantOn™ Low Power Consumption Guard Zones Included: 20" dome 10m cable (000-14548-001) Ethernet Adapter Cable (000-14552-001)

H3000 Speed Sensor - Plastic Flush Features: Plastic Flush Housing Integrated Sea Temperature sensor Self-Closing valve to enable easy removal of sensor Dimensions:138mm total/88mm housing  Construction: Plastic

TM260-9N Transom Mount Transducer 1kW 50/200kHz 9-Pin for Navico TM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line 1kW transom-mount brings crystal clear imaging to any of today’s fishfinders. The large 200 kHz element and the seven-element 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260’s high-performance mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH). Fishing Applications: Blue-water trolling using 50 kHz Deep-water bottom and wreck fishing up to 800 m (2,625’)  Features: Top-of-the-line narrow-beam transom-mount  Designed for bottom fishing Wide 19° beam at 50 kHz Narrow 6° beam at 200 kHz Interfaces to any 600 W or 1 kW sounder The depth and fast-response water-temperature sensor Kick-up assembly locks in the “up” position and will not damage the transom Accommodates transom angles between 3° and 21° Urethane housing Boat Size: Up to 12 m (40’) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Temp/Speed Sensor Temperature range of 25-99.9 degrees F. Speed range of 2-75 MPH.     Note: Requires purchase of AS T Y cable to connect with HELIX 5 Series, HELIX 7 Series, 600 Series, select 700 HD Series, 8x9 ci Series, 9x9 ci Series and 11x9 ci Series. 1-Year Limited Warranty Compatibility: Current Models: HELIX 10, HELIX 12, HELIX 5, HELIX 7, HELIX 9, SOLIX 12, SOLIX 15  Discontinued Models: 1100 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, ONIX  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Water Speed Sensor (4-Pin) f/echo™ Series Fishfinders Easily collect speed data and send it to your echo™ fishfinder with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel moves through the water, and speed data is collected and displayed on your device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

HDI Skimmer Med/Hight 9-Pin Transom Mount Features: HDI Skimmer Color: Black  Med/High 455/800kHz  xSonic Transducer

TM260 Transom Mount 1kW Blue Connector for Simrad & Lowrance Fits: Navico units with 7-Pin Blue Connector Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today’s fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260’s rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH). Features: Transom-Mount, Urethane Housing Depth and Temperature Maximum Depth Range: 50 kHz— 529 m to 735 m (1,800’ to 2,500’), 200 kHz—206 m to 294 m (700’ to 1,000’)  Boat Size: 8 m to 12 m (25’ to 40’) Top-of-the-line narrow-beam transom-mount Designed for bottom fishing Wide 19° beam at 50 kHz Narrow 6° beam at 200 kHz Interfaces to any 600 W or 1 kW sounder Cable length: 10m (33 ft) Kick-up assembly locks in the “up” position and will not damage the transom Accommodates transom angles between 3° and 21° Fishing Applications: Blue-water trolling using 50 kHz Deep-water bottom and wreck fishing up to 800 m (2,625') This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SS3D SSHD & TotalScan Skimmer Transom Mount Bracket Structure Scan 3D gives freshwater and saltwater anglers a unique, three-dimensional view of fish, structure and bottom contours - making it easier to understand where fish and structure are located in relation to your boat. With Structure Scan 3D, anglers spend less time searching for productive water and more time catching fish. Structure Scan 3D requires a 3D module with transducer and a HDS Carbon or HDS Gen3 fish finder/chart plotter display. Features: Bracket for 3D and TotalScan Transducers Fits select 3D Structure Scan and TotalScan models Used with Lowrance or Simrad products