Fuel Data Manager Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total fuel used. Features Replaces EP-85 Monitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel Rate into Fuel Used Outputs: Seasonal/Trip/Total Fuel Used Will report accurate Vessel Fuel Remaining if MFD Fuel screen is maintained at every refuel One sensor will monitor up to 3 engines Additional Fuel Data Managers can be added for more engines Will monitor fuel rates from multiple engines transmitting through a single gateway

A California law firm this week filed a class action lawsuit in U.S. District Court in Los Angeles, alleging oil companies failed to inform boat owners that ethanol causes damage to fiberglass fuel tanks.   The suit seeks to represent a class comprising all owners of boats with fiberglass fuel tanks who filled their tanks with ethanol-blended gasoline from a California retailer. The suit also seeks to represent all persons in California who own boats with fiberglass fuel tanks that had to be replaced because of damage caused by ethanol-blended gasoline bought from a California retailer.   The lawsuit, filed by Kabateck Brown Kellner, LLP, names major oil companies, including Chevron and Exxon Mobil Corp., as defendants.   Chevron said it has not yet been served with the lawsuit.   “As such, we are not in a position to comment,” said Lloyd Avram, Chevron media relations team leader.   According to court documents, Lawrence Turner, the plaintiff, bought ethanol-blended gasoline for his boat, which had a fiberglass fuel tank. Turner then discovered the ethanol in the gasoline began dissolving the boat's fiberglass fuel tank and caused damage to the boat's engine. The court documents said Turner was “forced to spend approximately $20,000 to fix the problems caused by the defendants' ethanol blended gasoline.”   "The price of gas is bad enough, but selling gasoline that dissolves gas tanks is a new low even for the oil companies," said Brian Kabateck, managing partner of Kabateck Brown Kellner and the lead attorney on the case, in a statement. "The oil companies know this fuel is corrosive, but they're keeping consumers in the dark to pump up their profits. The cost to the consumer is thousands of dollars in repairs."   Ethanol attracts water. When enough water is absorbed by the ethanol-blended gasoline, the ethanol and water solution separates from the gasoline, with the gasoline floating to the top. This results in a layer of water with a high concentration of ethanol at the bottom of the fuel tank.   There are many underground storage tanks that are made of fiberglass, but these were developed specifically to withstand ethanol.  The vast majority of fiberglass tanks on boats were not designed to withstand ethanol.

 Outboard Fuel Line Issues   We could not start our outboard engine.  WHAT'S WRONG??    Our outboard engine usually always starts on the first pull and it is not flooded.   Trying to pump fuel through the squeeze bulb was a waste of time as fuel would not fill the bulb.  Take the line off the engine and put a screw driver in the end and sometimes it would pump fuel and sometimes it would not.  So you have to figure it is an issue with the hose or the bulb.  All fittings were factory tight and when the hose was submerged in water no air bubbles when squeezing the bulb.  Let's just replace the hose. We got lucky and got the dinghy started.  Off to the local chandlery we go, it was about a mile walk from the dock.  We were towed back to the boat because again we could not get the outboard started. This is our second fuel hose on a two year old engine.  Anyway I removed the fittings without a lot of work and reinstalled them on the new hose with new clamps.  The outboard is now starting on the first pull again.   About three weeks have gone by, we are now having starting issues again.  Now what? I pull the spark plugs out and the engine is not flooded.  That leaves a fuel issue again. I start playing with the fuel line again, it can not be this, I'm saying to myself.  I pull off the engine side of the fuel line from the bulb and nothing seems wrong.  Put that back together and take the tank end of the hose off the bulb.  There's an issue, I can't blow through it.   So I pull off the tank fitting, there it is, about a ½” in you can see something blocking the hose.  So I cut off about 3 inches of that end, I still could not blow through it. Cut off another 3 inches and found that same looking blockage twisted up in the hose.  What is this junk, this $50.00 fuel hose is garbage.  This time I have a new idea, can I pull this blockage out?  I was able to get hold of enough of that stuff to pull it all out of the hose.  It's a plastic liner and was twisted in several spots.  I ran some fuel through the hose without the liner, now to get rid of the glue that was used to keep the liner in place and then the engine ran fine.   Hose three, that's what I said hose number three.  This has to be a fluke so I bought another new hose and will change it out the next time I have an issue.  Well later is here and guess what.  The outer hose on this new replacement has shrunk some and the thin plastic liner is sticking out both ends of the new hose.  That hose was almost $65.00 as we were again in another country.   I have since replaced the Outboard Fuel Hose with Automotive Fuel Hose and put a plastic wire loom over it to protect it from the UV rays.  I'm just hoping the squeeze bulb I reused does not have a liner in it.  So far so Good two months later, our outboard starts on the first pull.       Closeouts     Rebates    Remanufactured    Specials  

  Accurately monitor temperature, humidity, pressure and more indoors or outdoors and easily access current and stored data wirelessly on your mobile device. Waterproof and rugged, Kestrel data loggers are built to stand up to the abuse of harsh environments while being quick to set up and simple to use. The Kestrel LiNK App allows users view real time data, set up threshold alerts, view charts and easily send data via email or social media.         Specials   Closeouts    Remanufactured    Rebates

Navico Navico is the leader in marine electronics and is currently the world's largest marine electronics company, and is the parent company to leading marine electronics brands Lowrance, Simrad and B G. Navico has approximately 1,500 employees globally and distribution in more than 100 countries. Navico partners with a talented, global supplier network to deliver quality products to its customers.

RAM Large Cable Manager f/2.25" Diameter Ball Bases The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. Compatible RAM Mounts: Compatible with all 2.25" diameter ball bases that contain a three hole, 120 degree hole pattern. Material: High Strength Composite and Glass Filled Nylon IMPORTANT: To prevent galling of threads during assembly, it is imperative that all threads are lubricated with oil prior to assembly. Note: The "U" in the part number reflects product packaged in poly bag. RAM ball base not included with purchase.

RAM Small Cable Manager for 1" & 1.5" Diameter Ball Bases The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. Compatible RAM Mounts: Compatible with all 1" and 1.5" diameter ball bases that contain the universal AMPs hole pattern. Material: High Strength Composite and Glass Filled Nylon IMPORTANT: To prevent galling of threads during assembly, it is imperative that all threads are lubricated with oil prior to assembly. Note: The "U" in the part number reflects product packaged in poly bag. RAM ball base not included with purchase.

Fluid Level Sensor Transmits the tank level from a suitable tank level sender unit on the the NMEA 2000 network. Replaces EP-65 Reports Tank Fluid Level: 0-100% Pre-configured for Fuel Tank Instance 0 Pre-calibrated to the 33-240j U.S. marine standard tank level sender Can re-calibrated via compatible Navico MFDs to other standard levels Can be reconfigured* to output the following level types: Water, Gray Water, Live Well, Oil, Black Water. Cable Length 10 feet and comes with a Micro-C T-Connector.

Freedom Sequence Intelligent Power Manager (EMS) The Xantrex Freedom Sequence is an intelligent energy management system (EMS) that provides automatic power & load management for Recreational Vehicles (RVs) when powered by shore power or generator. IQ FOR YOUR RV OR BOAT! Together with the Freedom SW Inverter/Charger, System Control Panel (SCP) and Automatic Generator Start (AGS), the Freedom Sequence provides a complete integrated power management solution for RVs. The Freedom Sequence enables you to monitor and control all the power components from a single, easy to use System Control Panel, rather than multiple, mismatched, control panels. When used with the Freedom SW Inverter/Charger and the Automatic Generator Start, the Freedom Sequence provides automatic generator starting and stopping and automatic inverter assist support for maximum load usage, all behind the scenes. These power components that form a single, cohesive 'Freedom SW Power System' are manufactured by Xantrex and are able to communicate with each other. The Freedom Sequence automatically manages RV power needs while helping to minimize the nuisance caused by tripping of circuit breakers. Features: Manages the complex RV or boat power system from a single remote System Control Panel Smooth integration with the Freedom SW inverter/charger to provide a total power solution Power management for different available sources including 50Amp Service, 30Amp Service, 20Amp Service and Generator Independent modular design allows use with any breaker panel Automatic inverter assist mode to provide additional power to support high peak power demands Automatically sheds and re-engages loads to avoid the nuisance circuit breaker tripping 4 AC and 4 DC relays for wider options on load shedding Automatic detection of 120/240 Vac split phase AC source Real time independent monitoring of AC loads Quick programming of custom OEM configuration Quick-connect AC terminals for fast and easy AC wiring (no strain relief required) Easy to operate and configure WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm VDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh.  These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low.  Features: Connection - M4 Stud Voltage: 6-24V *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Navico StructureScan™HD Sonar Stainless Steel Thru-Hull Transducer (Single) LSS-2 Though Hull Transducers Thru-hull, Stainless Steel LSS-2 StructureScan® HD transducers deliver extreme target detail, bottom discrimination and bait and game fish separation at depths to 300'/92M and a wider range of 600'/183M side-to-side coverage. All StructureScan® HD transducers are packed with an enhanced dual-frequency element array that operates at 455 kHz and 800 kHz. These Stainless steel transducers from Airmar® are available only from Navico exclusively for StructureScan® HD and StructureScan® systems. These sturdy, bronze transducers are resistant to the electrical forces in the environment where it will be used. Each feature a low-profile design that minimizes drag; provide exclusive 3-channel beam, port and starboard SideScan plus DownScan Imaging™ technology; includes a high-performance fairing that will give you Structure performance at speeds up to 35 mph; and feature a 30'/9M transducer cable.

Navico 7-Pin Blue Mix & Match Chirp Cable - 1M Airmar's Mix & Match Chirp Cable for Navico. Features: Length: 1M 7-Pin Color: Blue This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Navico 9-Pin Mix & Match Chirp Cable - 1M Airmar's 9-Pin Mix & Match Chirp Cable for Navico Med and High or Highwide Transducers Features: Length: 1M 9-Pin for Med, High, and Highwide Transducers, Single Chirp Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Navico Ethernet Cable Shadow-Caster's Navico Ethernet marine network cable.