Extension Cable with XID - 12-Pin - 30' Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 12-pin Airmar transducer with XID. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Extension Cable with XID - 12-Pin - 10' Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XID Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

M265LH Plastic In-Hull Mount Transducer w/Depth - 12-Pin Garmn's best performing 1 kW in-hull, this narrow beam transducer provides crisp image detail. The transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and a 0 to 30 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Not recommended for cored-hull vessels Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GPSMAP® 1243xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 12" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 1243xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 12.1" x 8.9" x 3.2" (30.8 x 22.8 x 8.2 cm) Weight: 6.6 lbs (3.0 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 10.3" x 6.4"; 12.1" diagonal (26.2 x 16.3 cm; 30.7 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

GPSMAP® 943xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 9" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 943xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 9.2” x 6.4” x 3” (23.3 x 16.2 x 7.6 cm) Weight: 3.6 lbs (1.6 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 7.8” x 4.4”; 9.0” diagonal (19.9 cm x 11.2 cm; 22.9 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge are required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) J1939 Ports: 1 Garmin Marine Network Ports: 1 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

15' Extension Cable - 8-Pin SI-TEX Extension Cable Features: 15' 8-Pin

Bare Wire Transducer to 12-Pin Sounder Wire Block Adapter Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block adapter. Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv & 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1M Adapter Cable with Female 8-Pin Garmin Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with Garmin units.

DownVü™/SideVü™ 12-Pin Transom Mount Transducer for GCV™ 10 Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin transducer. This 20' transducer cable with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü™) and 500 ft left and right (SideVü™) an operating frequency of 455/800 kHz; and a 0 to 70 transom angle. Pair it with your GCV™ 10 black box sonar. Transducer comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GCV™ 10 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transducer Adapter Cable - 12-Pin Keep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6M (23.6") long. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GT51M-TM Transom Mount DownVü/SideVü 500W (CHIRP 260/455 kHz) Traditional 600W Mid-Band CHIRP 80-160 kHz Transducer with Temp - 12-Pin The GT51M-TM transom mount transducer provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. This traditional CHIRP and CHIRP DownVü/SideVü transducer is optimized for depth performance and rough condidtions. The CHIRP DownVü/SideVü elements have a power rating of 500W per element (1,500W total) and operating frequencies of 260/455 kHz. The traditional CHIRP sonar has a power rating of 600W and operating frequencies of mid-band CHIRP 80-160 kHz. It also includes a built-in fast response temperature sensor. GT51M-TM includes a 12-pin transducer with mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power Cable Right Angle - 2-Pin Power your compatible black box sonar with this 6' (2M) threaded power cable. The right-angle connector helps with the tight fit often associated with mounting.

TZtouch3 Transducer Y-Cable 12-Pin to 2 Each 10-Pin Furuno's TZtouch3 transducer Y-cable connects a 12-pin to 2 different 10-pin. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

1M Adapter Cable with Male 8-Pin Black Box Connector for Echonautics 300W, 600W & 1kW Transducers Mix-n-match cable for use with SI-TEX NavPro units.