Fender Tender II Use this Davis accessory to clip your fenders to rails, lifelines, side wing windows or cleats. Fender Tender II simplifies the handling and relocation of boat fenders. The "Railing Lock" firmly grasps rails from 7/8" to 1" (22 to 25 mm) diameter. New "Lifeline Lock" provides added safety. Use 1/4" to 3/8" (6 mm to 9 mm) diameter nylon line. Made of tough, sun-resistant plastic.

FENDER - Navy Blue - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 Color: Navy Blue *Sold as a pair

Gianneschi PM50 REPAIR KIT Pm50 Repair Kit Kpm5001

Gianneschi PM40 REPAIR KIT PM40 Repair Kit

Zig-Zag Fender Hanger - Pair with 4' Fender Lines No need for knots in your fender lines. Keeps fenders in place with a simple system. Put a line over the rail and weave it through the zig-zag teeth. Features: Pair, 4 ft. fender lines included Quick and easy to use

Mooring Fender Lock Kit - Stainless Steel Pair Stainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal. Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately

Fender Loc Fender Lines - 3/8" x 72" - Pair - White Features: Provides an adjustable and secure tie-off for your boat fenders Built-in loop eliminates knot tying and works on all types of fenders Package includes (2) - 6' fender loc lines; 3/8" in diameter Polypropylene rope is color matched to your Taylor fender

Fender Loc Fender Lines - 3/8" x 72" - Pair - Blue Features: Provides an adjustable and secure tie-off for your boat fenders Built-in loop eliminates knot tying and works on all types of fenders Package includes (2) - 6' fender loc lines; 3/8" in diameter Polypropylene rope is color matched to your Taylor fender

Fender Loc Fender Lines - 3/8" x 72" - Pair - Black Features: Provides an adjustable and secure tie-off for your boat fenders Built-in loop eliminates knot tying and works on all types of fenders Package includes (2) - 6' fender loc lines; 3/8" in diameter Polypropylene rope is color matched to your Taylor fender

9" Diameter Fender Holder Kit - 2 Pack Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage. Features: Versatile system for easy installation Durable construction for years of service Flexible modular design - add on or reconfigure at anytime Available as individual pieces or as a kit for a two or three holder assembly One of the most popular fender holders on the market The two holder kits include two TFR fender baskets (of selected size), three TFR 402 rails mounts (for 7/8 - 1 in. rails) and a pair of TFR 403 Parallel Connectors Specifications: Size: (inch) 9" Fits the following Polyform fenders: F-2, F-3, G-5, HTM-2, NF-5 *Note: Fenders sold separately

FENDER - Black - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 Color: Black *Sold as a pair

FENDER - Grey - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 Color: Grey *Sold as a pair

FENDER - Red - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 Color: Red *Sold as a pair

FENDER - White - Pair Snubber FENDER is an easy-to-use, quick fender fastener. Attaching your fender reliably happens in just seconds with the ability to adjust the height. Snubber FENDER fits all railing types regardless of size. Rubber-like material doesn’t slide along the railing and doesn’t clunk around in your boat. Features:  Rubber-like material doesn’t slide along the railing Does not clunk around or leave marks on your boat Quick simple attachment and detachment No need to attach the line permanently through the compensator Can also be attached while the line is tied on both ends No need for loose clips Applications: Snubber FENDER is suitable for all types of boats that have handrails Fender lines with a diameter of 5-8 mm and also fits flat ties Fits chains, ropes, and bars Specifications:  Size: 138 x 40 x 24 mm Weight: (lb) 0.17 / (g) 77  Weight (pair): (lb) 0.34 / (g) 154 Color: White *Sold as a pair

True Fit Fender Holder - 9" Diameter Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel.  The modular design and hardware attachments allow for a wide array of options for boat fender storage. The modular system fits rails from 7/8" to 1" at any height or any angle.  Because of its modular design, you can add on additional fender holders as your needs change.  *Fenders and connectors sold separately  Compatible With: F-2 Fenders, F-3 Fenders, G-5 Fenders, NF-5 and HTM-2 Fenders Features: A versatile system for easy installation Durable construction for years of service  Flexible modular design - add on or reconfigure at anytime Technical Specifications: Made from 304 Stainless Steel wire Dimension Inside Diameter - 9" Dimension Length - 19" Weight (individual Fender Holder) - 1.6 lbs.  In the Box: One (1) TFR-230 Holder *Sold as a Individual