|
Description:
The RAM-111U-B consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Compatible Devices:
Garmin Fishfinders/Chartplotters
Humminbird Fishfinders/Chartplotters
Lowrance Fishfinders/Chartplotters
Raymarine Fishfinders/Chartplotters
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
48.77 |
|
|
RAM 2.25" Diameter Ball Mount with 11" X 3" Rectangle Base, & 3.68" Round Base
The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Weight:
3.45 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
115.55 |
|
|
RAM® Pin-Lock™ Security Kit for Single Swing Arms & Gimbal Brackets
The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.
Hardware Included:
(2) RAM Pin-Lock Security Keys
(1) 1.25" Nylon Washer
(1) #10-24 x .72" Threaded Stud Adapter
(1) 5/16"-18 x 1.06" Threaded Stud Adapter
(1) 1/4"-20 x 1.34" Threaded Stud Adapter
(1) M5-.8 x 12mm Threaded Stud Adapter
(1) M6-1 x 16mm Threaded Stud Adapter
(1) M8-1.25 x 21mm Threaded Stud Adapter
(4) .72" Nylon Washers
(1) .77" Nylon Washer
|
29.47 |
|
|
The RAM-111U-D consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG LENGTH double socket arm and 6.25" x 2" rectangle base. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-111U-D is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
68.69 |
|
|
RAM Pin-Lock™ Security Kit and 1.5" Diameter C Size Mount for Gimbal Brackets
The RAM-SG-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering.
Features
Overall Height:
7.35"
Weight Capacity:
Up to10 lbs
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
67.36 |
|
|
RAM 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Base, STANDARD LENGTH Double Socket Arm & 2.5" Round Base
The RAM-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1.5" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to ten pounds.
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
|
50.30 |
|
|
RAM 2.25" Ball Mount w/ Long Double Socket Arm, 11" x 3" Rectangle Base, and 3.68" Round Base
The RAM-D-111U-E consists of a long length double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more
Specifications/Features
Weight Capacity:
Up to 15 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
|
162.08 |
|
|
RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ Base
The RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected to the base is a standard length double socket arm and 6.25" x 2" rectangle plate for supporting a wide range of fishfinders and chartplotters. The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear polybag for store shelf display. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
51.59 |
|
|
RAM 1" Diameter Ball Mount with 6.25" X 2" Rectangle Base & 2.5" Round Base
The RAM-B-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles. For most applications, mount will support up to three pounds.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. For mounting a GPS puck antenna to this mount, RAM recommends the RAM-338U
|
33.04 |
|
|
The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and much more. Rubber ball and socket technology dampens shock and vibration, as well as allows for almost infinite adjustment and perfect viewing angles.
The RAM-D-111U is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
11.5"
Weight Capacity:
Up to 15 lbs.
Ball Size:
2.25" Rubber "D" Ball Size
Material:
Powder Coated Marine Grade Aluminum
|
140.80 |
|
|
RAM Short Double Socket Arm f/3-3/8" Bases
Part #: RAM-E-201U-D
The RAM-E-201U-D short double socket arm has a socket at both ends that accomodates 3-3/8" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 7.25"
Socket-to-Socket Length: 4.375"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
106.10 |
|
|
RAM Pin-Lock™ Security Kit and 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Plate
The RAM-S-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
Features
Overall Height:
7.35"
Weight Capacity:
Up to 10 lbs
Material
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
55.60 |
|
|
RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.79 |
|
|
RAM 12" Long Double Swing Arm with Open Swivel Single Socket
The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size.
Swing Arm Length:
12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
59.90 |
|
|
RAM Short Double Socket Arm with Jam Nut for 2.25" Ball Bases
Part #: RAM-D-201U-C-MI1
The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
50.05 |
|