|
60-Amp Circuit Breaker
MotorGuide's Waterproof 60-Amp Circuit Breaker. Protects your motor and boat wiring. Manual reset breaker is compatible with all 12, 24 and 36 volt trolling motors.
Manual reset
Compatible with all 12-, 24- and 36-volt trolling motors
Completely waterproof
|
41.04 |
|
|
Ampco C114-KIT1-EPDM, Kit
|
111.15 |
|
|
Ampco C216-Kit1-Buna, Kit #1
|
76.05 |
|
|
|
107.64 |
|
|
Ampco C216-KIT1-VITON, Kit
|
115.83 |
|
|
"C" Frame Magnetic Circuit Breaker
60 Amp
Double Pole
Standard Circuit Breakers for Paneltronics electrical distribution panels
Meets all American Boat and Yacht Council (ABYC) Standards for non ignition protected circuit breakers
UL Recognized (UL 1077) for use in the U.S.A., and CSA Certified for use in Canada
CE compliant Circuit Breakers are VDE Approved for use in Europe
Trip free (ABYC E-11.12.1.7.2.2.)
Manual reset (ABYC E-11.12.1.7.2.4.)
|
50.08 |
|
|
V10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M)
A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it. The T-Spec V10-2041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 20'
4 AWG matte Grey OFC copper wire - 20'
18 AWG Blue wire - 20'
(1) 100 amp circuit breaker
(1) 1/0 AWG ring terminal with White boot
(1) 1/0 AWG ring terminal with Silver boot
(10) 6" Wire ties
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
156.66 |
|
|
V10-1041 4 Gauge Amp Wiring Kit - 10' (3.05 M)
A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it. The T-Spec V10-1041 Amp Kit is ideal for most single marine amps with a power rating of up to 1000 watts and will give you reliable power for seasons to come.
Features:
Complete marine amplifier wiring kit
Includes power wire, ground wire, turn-on wire, circuit breaker, ring terminals, wire ties, and more
Marine-compliant cable
In the Box:
4 AWG pearl White OFC copper wire - 10'
4 AWG matte Grey OFC copper wire - 10'
18 AWG Blue wire - 20'
(1) 100 amp circuit breaker
(1) 1/0 AWG ring terminal with White boot
(1) 1/0 AWG ring terminal with Silver boot
(10) 6" Wire ties
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
99.59 |
|
|
Combo Kit with ELCI Sensor & 30 Amp Breaker/Stainless Steel Door
Features:
Stainless Steel Sensor
30 Amp Breaker
Electric Leakage Circuit Interrupter
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
729.31 |
|
|
Combo Kit with ELCI Sensor & 50 Amp Breaker/Stainless Steel Door
Features:
Stainless Steel Sensor
50 Amp Breaker
Electric Leakage Circuit Interrupter
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
758.54 |
|
|
Combo Kit with ELCI Sensor & 30 Amp Breaker Non-Metallic Door - White
Features:
White Sensor
30 Amp Breaker
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
568.54 |
|
|
Combo Kit with ELCI Sensor & 50 Amp Breaker Non-Metallic Door - White
Features:
White Sensor
50 Amp Breaker
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
599.23 |
|
|
CombiMaster Inverter/Charger - 12/1500-60 Amp - 120V
The CombiMaster inverter/charger provides the most power and charging in the series. The 3500W version comes in 12V and can be paralleled stacked in a single system up to 10.5kW. The 24V models in 3500W and 5000W can create parallel stacked systems up 35kW. The 1500W version delivers 1500W of pure sine wave inverter power and 60 amps multi chemistry battery charging. The 1500W is the smallest form factor in the series. All models provide pure sine wave inverter power and over 60-200 amps multi-chemistry battery charging, plus the intelligent design is NMEA 2K and MasterBus compatible.
Specifications:
Nominal DC Voltage: 12V (10.2-16V)
Continuous Power at 104° F: 1500W
Peak Power 30 seconds: 2250W
Surge Power 5 seconds: 3000W
Parallel Stacking: No
Synchronize with Mains/Generator: Yes
Output Waveform: Pure Sine
|
1351.20 |
|
|
52MM (2-1/16") OceanLink Battery Current Gauge - 60/+60 Amps - Black Dial & Bezel
OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection. Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.
Interchangeable bezel option.
Features:
AMP Superseal Easylink
270° pointer deflection angle
Reverse polarity protection
Anti-fog double lens
Front & rear protection rating IPX5
Operating temperature range -20 °C / +70 °C
Nominal voltage - 12/24V
Hole diameter - 52MM
In the Box:
Gauge
Bezel
Rubber Seal
Spinlock
Installation Instructions
Safety Instructions
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
57.66 |
|
|
Marine Amp Wiring Kit
In order to deliver the highest quality in sound and performance, Roswell has developed its own wiring accessories to join all of your Roswell Marine audio products together. Everything you need to install and connect two amplifiers (except the amplifiers themselves) is included in this package.
Includes:
(1) power fused distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin charcoal ground wire – 105°C rated, tinned OFC full-spec copper
(1) power ground distribution block: (1) 1/0 AWG/4 AWG in, (2) 4 AWG/8 AWG out
15 ft. 4GA. satin blue power wire – 105°C rated, tinned OFC full-spec copper
(1) inline fuse holder - 1/0 AWG in/out with 4 AWG reducers
10 ft. 18GA. frosted blue remote wire – tinned OFC full-spec copper
(1) 100 Amp mini ANL fuse
(2) 2-meter smoked jacket, quad shielded RCA cables
(2) 60 Amp mini ANL fuses
(2) RCA Y-Adapter (1F to 2M)
(1) 50 amp mini ANL fuse
(2) RCA Y-Adapter (1M to 2F)
(1) 80 amp ANL fuse
(12) 4" black cable ties
(1) 100 amp ANL fuse
(6) stainless steel 3.9 x 16mm screws
(1) 150 amp ANL fuse
(2) M8 washers (ID: 8.4mm, OD: 16mm)
(1) 4GA. brass terminal ring with black boot & M10 bolt
(1) 4GA. brass terminal ring with red boot & M10 bolt
*Does not include amplifier-to-speaker wiring
|
180.00 |
|