|
RAM EZ-ROLL'R Cradle f/SPOT Gen3
This RAM high strength composite cradle is designed to hold the following devices:
SPOT Gen3
Features:
Open access to all electronic ports
Patented roller design for super smooth placement and removal of the SPOT Gen3
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
12.38 |
|
|
RAM Cradle Holder f/Garmin nüvi 50 & 50 LM
Part #: RAM-HOL-GA50U
This RAM high strength composite cradle is designed to hold the following devices:
Garmin nüvi 50
Garmin nüvi 50LM
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
10.31 |
|
|
RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMT
This RAM high strength composite cradle is designed to hold the following devices:
Garmin nüvi 2557LMT
Garmin nüvi 2577LT
Garmin nüvi 2597LMT
Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Roller design for super smooth placement and removal of the GPS
3. High strength materials ensure product longevity
4. Lifetime warranty
Material:
High Strength Composite
Compatible RAM Components:
The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
12.84 |
|
|
RAM Cradle Holder for Garmin Montana® Series
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
10.73 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Astro 220
Garmin GPS 60
Garmin GPSMAP 60
Garmin GPSMAP 60C
Garmin GPSMAP 60CS
Garmin GPSMAP 60CSx
Garmin GPSMAP 60Cx
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
*The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.
|
8.45 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 200w
Garmin nuvi 205w
Garmin nuvi 250w
Garmin nuvi 255w
Garmin nuvi 260w
Garmin nuvi 265wt
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
8.94 |
|
|
RAM Cradle Holder for the Garmin dezl 560LMT & 560LT
This RAM high strength composite cradle is designed to hold the following devices:
Garmin dezl 560LMT
Garmin dezl 560LT
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Patent pending roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
17.59 |
|
|
RAM Cradle Holder for the Garmin Rino 610, 650 & 655t
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Rino 610
Garmin Rino 650
Garmin Rino 655t
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
14.50 |
|
|
Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMT
The RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Lifetime warranty
Made in the U.S.A.
Material: High Strength Composite
Note: *The RAM-HOL-GA54U was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.
|
25.63 |
|
|
EZ-Roll'r™ Cradle for SPOT X™
The form-fitting, high-strength composite RAM® EZ-Roll’r™ cradle for the SPOT X™ allows for the attachment of RAM® components containing the universal AMPS hole pattern. With the device in the cradle, all buttons and the power port remain fully accessible. The RAM® EZ-Roll’r™ cradle for the SPOT X™ is compatible and interchangeable with a wide range of RAM® diamond ball bases. Included is a set of two nuts and bolts.
Features:
Open access to all electronic ports
Patented roller design for super smooth placement and removal of the SPOT X™
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.31 |
|
|
RAM® Printer Cradle for Brother PocketJet 7 Series, 6/6 Plus & 673
The RAM-VPR-101 is designed to hold Brother® PocketJet® Series portable printers. A custom-fit enclosure, the cradle is form-fitting with no sharp edges and adds little to the overall size of the printer. Key features are a full view of LEDs, a sight hole to check the paper level, and a caddy to store pens, cell phones, paper clips, glasses, and other useful items. Complete kits are available as stand-alone systems or integrate with your existing RAM products.
Features:
The form-fit cradle is specifically designed to hold Brother PocketJet 7 series, 6, 6 Plus, and 673 portable printers
Compatible with RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability
Made of high-strength composites for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (4) #8-32 x 5/8" Machine Screws & (4) #8-32 Nylock Nuts
Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"
Materials: High Strength Composite
Weight: 1.1lbs
|
44.75 |
|
|
RAM Cradle Holder for the Garmin nüvi 52, 52LM, 54 & 54LM
This RAM high strength composite cradle is designed to hold the following devices:
Garmin nüvi 52
Garmin nüvi 52LM
Garmin nüvi 54
Garmin nüvi 54LM
Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Patent pending roller design for super smooth placement and removal of the GPS
3. High strength materials ensure product longevity
4. Lifetime warranty
Material:
High Strength Composite
Compatible RAM Components:
The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts
|
13.42 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Approach G5
Garmin Oregon 200
Garmin Oregon 300
Garmin Oregon 400c
Garmin Oregon 400i
Garmin Oregon 400t
Garmin Oregon 550
Garmin Oregon 550t
Garmin Oregon 600
Garmin Oregon 600t
Garmin Oregon 650
Garmin Oregon 650t
Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Patent pending roller design for super smooth placement and removal of the GPS
3. Form fitted cradle supports and protects device without vibration
4. High strength materials ensure product longevity
5. Lifetime warranty
6. Made in the U.S.A.
Material:
High Strength Composite
|
10.85 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Astro 320
Garmin GPSMAP 62
Garmin GPSMAP 62s
Garmin GPSMAP 62sc
Garmin GPSMAP 62st
Garmin GPSMAP 62stc
Material:
High Strength Composite
|
9.90 |
|
|
RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base
Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions:
Accommodates rails 3/4" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.38 |
|