Inboard/Outboard Rail Mount The Kuuma Grill Rail Mount is ideal for using your Kuuma grill aboard your boat by mounting it on any cockpit rail.  This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters. Compatible With: Any Kuuma grill Features: Can be used on 7/8" - 1-1/4" round horizontal railings or on 1-1/4" square railings All installation hardware included Made of rust-resistant anodized aluminum Dimensions (L x W x H) - 9" x 2" x 2.5" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quick Release Rail Mount The Quick Release Rail Mount allows you to quickly mount and dismount your grill to the rail of your boat.  It features a quick-release knob for fast and easy set-up and break-down.  The grill mounting plate and rail mount are designed to separate and reattach without unscrewing any hardware and without the use of tools.  This simple design helps prevent the loss of small installation hardware, and helps ensure that your Rail Mount will be convenient and easy to use for many years.  The Quick Release Rail Mount is constructed of anodized aluminum with stainless steel hardware.  The Rail Mount allows the grill to hang outside or inside the boat's rail. Compatible With: Any Kuuma grill  Features: Grill mounting plate and rail mount are designed to separate and reattach for easy set-up and break-down Quick-release knob easily pulls and twists to lock in the "release" position, making grill removal simple Prevents losing small installation hardware during installation or removal Fits 7/8 to 1-1/4" round or square rails, allows grill to hang outside or inside boat's rail *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Universal Single Axis Mount  The Universal Single Axis Rail Mount solves many standard mounting problems.  Allows you to mount your Kuuma grill either vertically or horizontally to any square or round railing. This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters. Compatible With: Any Kuuma grill Features: Can be used on horizontal or vertical rails Can be used on square or round rails Hang your grill outside the rails to protect fiberglass from spills All installation hardware included *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Newport SS 4" Tachometer for Gas Inboard/Outboard - 0 to 6000 RPM The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - 0 to 6000 RPM 3.375" (85 mm) Mounting hole Operating Voltage - 12/24 V In the box: Gauge Mounting Hardware Installation Manual Factory P/N TC9516 *Sold as an Individual **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Teak Swim Platform Comes equipped with mounting hardware for boats with inboard/outboard motors 304 Stainless Steel Hardware Assembly Required

Teak Swim Platform Comes equipped with ladder & mounting hardware for boats with inboard/outboard motors 304 Stainless Steel Hardware Assembly Required

White Poly Swim Platform Comes equipped with mounting hardware for boats with inboard/outboard motors 304 Stainless Steel Hardware Assembly Required

White Poly Swim Platform Comes equipped with ladder & mounting hardware for boats with inboard/outboard motors 304 Stainless Steel Hardware Assembly Required

Teak Swim Platform with 2-Step Telescoping Ladder for Boats with Inboard/Outboard Motors Features: 304 S.S. Hardware Platform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thick Includes Mounting Hardware Assembly required

Teak Swim Platform with 3-Step Telescoping Ladder for Boats with Inboard/Outboard Motors Features: 304 S.S. Hardware Platform Dimensions: 18"W (back) 17"W (front) x 15"D x 1-5/16" thick Includes Mounting Hardware Assembly required

Platinum 4" Tachometer - 7000 RPM (Gas - Inboard, Outboard & I/O) Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed. By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution. 4" - Hole size: 3.375" (85mm) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N TC8511 *Sold as an Individual *Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Poly Rail Mount Motor Bracket - White Injection Molded Polypropylene These Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.

Poly Rail Mount Motor Bracket - Black Injection Molded Polypropylene These Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.

Clamp-On Rail Mount Fits On 1" & 1-1/4" Rails Designed to allow secure mounting of the Navilights with magnetic base to the bow pulpit or stern rail. Examples of Usage: The Clamp-on Rail mount easily attaches to the bow pulpit and can safely hold for example the Navilight Tricolor. In a nearly center position it may be used in its BiColor mode, otherwise it is recommended to use two Clamp-on Rail mounts, each equipped with a Navilight Tricolor showing the green and red light individually. Mounted to the Stern rail it may hold the Navilights TriColor, or the Navi light 360°/Navi light Rescue to show the Sternlight. The Clamp-on Rail mount may also be used on vertical poles - together with the Navi light 360°/ Navi light Rescue it is the perfect solution for the Masthead light. Specifications: Save mounting of Navi lights with magnetic base (Navi light 360° 2NM, Navi light Tricolor 2NM, Navilight Red/Green, Navi light 360° Rescue). Fits on rails from 25 to 32mm (7/8" to 1-1/4") Rotates through 180° Size: L = 97mm, W = 50mm, Diameter = 55mm Weight: 80g

Navilight All RED 360° 2NM w/Navimount Base & Rail Mount - Black Portable All-round RED Navigation light with Navimount base, compatible with Navisafe Navimount system and many GoPro® / Action camera mounts. The Navilight All RED 360° without the Navimount base can be mounted directly to the 4-piece-pole but also directly to all kind of GoPro® / Action camera mounts. Technical Specifications: 5 Modes: 360° Float light facing up Submersible to 20M /66' Corrosion resistant Powered by three AAA batteries (not included) Modes: 16 RED LED 360° Constant lights / 40 - 45hrs 16 RED LED 360° Flashing lights / 110 - 115hrs 10 RED LED 225° Forward lights / 70 - 75hrs 6 RED LED 135° Stern lights / 95-100hrs 4 RED LED 360° Dim function / 125-130hrs Navimount RAIL Mount - Black The Navimount RAIL mount is designed to attach the Navilights with Magnetic base, Navimount base or Suction base onto any 25 or 35mm / 1" or 1-1/4" rail. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.