Bluetooth Dongle Have a stereo without Bluetooth, but want to upgrade to Bluetooth without paying for a brand new stereo? Look no further than this small BT module.  Connect the RCA outputs from the MIL-BTREC module into the RCA aux input from your stereo, and wire to 12V power and 12V ground.  Features: Connects to any stereo with an RCA auxiliary input Allows you to stream audio from your smartphone to your radio Requires both power and ground *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Bluetooth Dongle  (Audio only) Designed to enable Bluetooth audio streaming from a compatible Apple, Android, Windows, BlackBerry or other Bluetooth compatible media device directly to any Fusion marine stereo (with AUX input). The MS-BT100 supports live audio streaming and is accessed through the auxiliary input audio source on your stereo. Whether you have an iPhone, Android or Windows smartphone you can enjoy your favorite audio tracks through Fusion's award winning marine entertainment systems.  Features: Live Audio Streaming: Apple, Android, Windows, BlackBerry or other Bluetooth compatible device streaming Media Device Control: Navigate your music library while you're on the move directly from your smartphone Simple installation: Connect the RCA connectors to the AUX input on your Fusion marine stereo. +12V Power and ground connection required Designed with the marine environment in mind, the MS-BT100 boasts International IP65 water resistant rating to protect against the harsh marine environment The MS-BT100 has an effective range of 33 ft around your vessel, so whether you're on the deck or at the helm enjoy uninterrupted audio streaming 1 Year Limited Consumer Warranty: For peace of mind Functionality:  If you're on the move or relaxing on the deck, simply reach into your pocket for direct Media Device Control of the audio experience from your compatible device Simply connect the MS-BT100 to the Auxiliary input RCA connectors on your marine stereo and connect the power to the amplifier power output for instant Bluetooth functionality *Compatible with any Bluetooth enabled Fusion Marine Stereo. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bluetooth Dongle - Audio Receiver The BT-TWO allows "Connect & Play" integration to your audio device by BT A2DP, with the ability to be a stand-alone source.  The BT-TWO does not interfere with hands-free systems! The ideal application is to be used as a stereo head unit replacement and in combination with an amplifier via RCA connectors. Features: Works w/Android and Apple OS Waterproof IP65 Rated Stereo Male RCA Output BT 4.0 (higher sound quality, faster speed, longer range) Remote Trigger Output Low Current Draw - 20mA In-line Fuse Protection *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SmartSolar MPPT Solar Charge Controller - 250V - 70AMP - UL Approved A solar charger gathers energy from the solar panels and stores it in the batteries. Using the latest, fastest technology, SmartSolar maximizes this energy harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged. Feature Highlights Common to All Models: Ultra-fast Maximum Power Point Tracking (MPPT). Advanced Maximum Power Point Detection in case of partial shading conditions. Outstanding conversion efficiency. Natural convection cooling.  Automatic battery voltage recognition. Flexible charge algorithm. Over temperature protection and power derating when the temperature is high.   Sizing Options: Suitable for a variety of battery voltages. Most models connect to 12, 24, and 48V batteries, some only connect to 12 and 24V batteries, or only to 48V batteries. Charge currents rating from 10A up to 100A. Maximum PV array Voc voltages ranging from 75V up to 250V. Multiple chargers can be used in parallel, for large systems we recommend using the models with a VE.Can communication port.   PV Terminal Options: TR - one positive and one negative screw terminal. MC4 - 3 pairs of paralleled MC4 connectors.   Bluetooth Options: SmartSolar models have Bluetooth. BlueSolar models do not have Bluetooth. They can be retrofitted to have Bluetooth by connecting the VE.Direct Bluetooth Smart dongle. Advantage: the product is not Bluetooth accessible when the dongle is not connected. Note that on the SmartSolar models, Bluetooth can be disabled.   Display Options: VictronConnect Application. Connects via Bluetooth or via the VE.Direct - USB interface MPPT Control. Connects to all models via a VE.Direct cable SmartSolar Control Display. Plugs directly into the housing of the larger models GX device VRM website (GX monitoring device needed) Communication Ports: VE.Direct - all models VE.Direct and VE.Can - limited models. VE.Can is especially suitable for systems with multiple solar chargers. All units are simply “daisy chained” to each other with a single RJ45 cable between each unit and also between the last unit in the chain and the GX monitoring device.   Temperature Sensor Options: Internally (all models). Externally via the Smart Battery Sense (only SmartSolar models).   Load Output Options: Physical output - On the 10, 15 and 20A models. Virtual output - via VE.Direct TX digital output cable and the BatteryProtect or a solid-state relay.   Remotely Enabling and Disabling the Charger: All larger units feature the Victron standard remote on/off terminals. All models that don’t feature an onboard Remote on/off terminal can be remotely controlled by using the VE.Direct non-inverting remote on/off cable – ASS030550310. Note that this prohibits using the VE.Direct port for anything else.   Firmware Update Options: Local updates via the VictronConnect Application (via Bluetooth or USB-VE.Direct interface) Remote updates via the VRM website and a GX device   Optional Accessories: VictronConnect Application (free download) Wire boxes, to cover and protect the terminals. See table on page 2 for wire box types Control and display panels: MPPT control or SmartSolar control) GX monitoring device (CCGX, Venus GX, Octo GX, or Cerbo GX) Data cables: VE.Direct cable, RJ45 Cable (VE.Can models only), USB-VE.Direct interface External control cables: TX cable, non-inverting cable Bluetooth dongle (for non-smart models) Specifications: Load Output: No Battery Voltage: 12/24/36/48V Optional Display: MPPT ctrl & SmartSolar ctrl  Bluetooth: Built-in Com. Port: VE.Direct Remote On-Off: Yes Programable Relay: Yes Wire Box: L Please contact your dealer for any returns, repairs or support issues related to this product.

MIL-BC1 Bluetooth Controller  Need a stereo option that simply focuses on Bluetooth? Look no further than the MIL-BC1.  This small pre-amp Bluetooth controller gives you maximum music with minimal hassle.   Once installed, pair your Bluetooth device/stash it in a safe place, and use this BT controller to control all basic audio functions.   Note: you will need an external amplifier in order to complete this system setup as this controller is “pre-amp”. Features: Waterproof (IP66 rated) resistant to rain, splash and spray Compatible with iPhones and Android smart phones * SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VE. Direct Bluetooth Smart Dongle Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data.  The dongle is able to read data from all products with a VE.Direct port, such as the BMV-70x series battery monitors, Phoenix Inverters with VE.Direct port, MPPT Solar Charge Controllers. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

SmartShunt 1000AMP/50MV Bluetooth Smart Battery Shunt The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. VictronConnect VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.  Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

SmartShunt 2000AMP/50MV Bluetooth Smart Battery Shunt The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. VictronConnect VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle.  Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

SmartShunt 500AMP/50MV Bluetooth Smart Battery Shunt The Smart Battery Shunt The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively the SmartShunt can be connected and be read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable. The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but less wiring and clutter is wanted. The SmartShunt is equipped with Bluetooth, a VE.Direct port and a connection that can be used for: monitoring a second battery, midpoint monitoring or a temperature sensor. VictronConnect VictronConnect lets you get live status information and configure any Victron products which either have Bluetooth built-in, or are connected to a VE.Direct Bluetooth Smart Dongle. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

VE. Bus Smart Dongle The VE.Bus Smart dongle is two products in one: First of all it is the bluetooth accessory for our range of inverter/chargers: Multis, MultiPlusses, MultiPlus-II, MultiGrid, MultiGrid-II, Quattros, and our series of Phoenix Inverters with a VE.Bus port. When installed, use the VictronConnect app to monitor operation and also operate the system: change the input current limit as well as switch between Off, On and Charger-only modes. Secondly it can work as a Voltage- and Temperature-sense device for the inverter/charger. This works with all models, and is especially useful in combination with the MultiPlus-II, as it does not have on-board terminals for Voltage- and Temperature sense wiring For monitoring, the device is a great alternative in caravans, smaller yachts and motor homes for which the Color Control GX or Venus GX are a step too far. Warranty Info WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Please contact your dealer for any returns, repairs or support issues related to this product.

REM70 Wired Remote   The Milennia MIL-REM70 wired remote control lets you command your stereo system from a remote location. You'll be able to change sources, switch radio bands, and also adjust the volume, track selection, toggle play/pause and more. This remote works with a variety of Infinity and JBL marine receivers  Features: Water resistant  Provides control of all stereo functions Backlit silicone rubber membranes 2-line display  Dimensions (L x W x D) 4-1/8" x 2-1/4" x 1-6/10" In the Box: REM70 Remote 18" Wire harness Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

REM80 Hardwire Remote The Milennia MIL-REM80 wired remote control lets you command your stereo system from a remote location. You'll be able to change sources, switch radio bands, and also adjust the volume, track selection, toggle play/pause and more on the built-in 2-3/8" LCD display. This remote works with a variety of Infinity and JBL marine receivers  Features: Water resistant  Provides control of all stereo functions Backlit silicone rubber membranes 2-line display  Dimensions (L x W x D) 4-1/8" x 2-1/4" x 1-6/10" In the Box: REM80 Remote 18" Wire harness Instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Power Module  This RGB controller is designed to work with select Infinity marine receivers, including the KAPPRV515.  With 9 total inputs, you can add and control LED speakers, additional lighting, and more.  There's an output that will allow you to daisy-chain additional Milennia RGB modules. Features: Designed to work with select Infinity marine receivers Control LED speakers, additional lighting, and more Made for marine and outdoor use In the Box: Power module Wiring harness - 7" Mounting hardware *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MIL-RF9BL Wireless Remote with RXUART Receiver for Use with INFPRV250 & MIL-PRV22 Wireless RF remote compatible with JBL, Infinity, and Milennia remote-ready marine stereos.  Features: RF radio frequency means no line of sight is required Features volume control, track selection, radio tuning, and source selection Dimensions (H x D x W) - 3-3/16" x 3/4" x 2-7/16" Compatible with: MIL-PRV22   INFPRV250 *Sold as an Individual

SmartSolar MPPT 150/60-TR The Victron SmartSolar MPPT 150/60 Solar Charge Controller is Bluetooth accessible via either built-in Bluetooth or the Victron Energy Bluetooth dongle. The VictronConnect app is available for free on both iOS and Android. This app allows you to view plenty of parameters: battery voltage, solar history, load output, flexible battery charge algorithms, plus day/night timing and light dimming options. These solar charge controllers will gather energy from your solar panels fast and efficiently.  Ultra-fast Maximum Power Point Tracking (MPPT) Especially in the case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.  The load output is short circuit proof. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control is connected to the load output. A special interface cable may be needed, please see the manual Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Please contact your dealer for any returns, repairs or support issues related to this product.