|
C. SHERMAN JOHNSON
Johnson offers cable and wire fittings in 16th" to 3/8" sizes in type 316 stainless steel for machine swage, Hand Crimp, mechanical termination and splice termination. You can find cable railing hardware and Terminal Tuner, Classic, Decko, Smooth Line, Terminator and Threaded Terminal Turnbuckles to accent the look of any cable system.
|
|
|
Splice Line Small Boat Kit for Boats up to 30'
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
2 x LS-3600 Toggle Jaw w/ Splice Eye
2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
Fid/Needle/Twine
|
349.58 |
|
|
Splice Line Large Boat Kit for Boats up to 40'
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
2 x LS-3600 Toggle Jaw w/ Splice Eye
2 x LS-2900 Tubular Turnbuckle w/ Splice Eye
90' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions
Fid/Needle/Twine
|
383.69 |
|
|
Splice Line Gate Kit - Midship for One Side
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
1 x LS-3100 Over Center Gate Hook w/ Splice Eye
1 x LS-3200 Splice Eye to Splice Eye Fitting
1 x LS-3300 Gate Eye to Splice Eye Fitting
1 x LS-3400 Adjuster w/ Splice Eye
6' Dyneema
|
202.67 |
|
|
Splice Line Gate Kit - Aft for One Side
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.
Specifications:
1 x LS-3100 Over Center Gate Hook w/ Splice Eye
1 x LS-3300 Gate Eye to Splice Eye Fitting
6' Dyneema
|
154.19 |
|
|
Lever Arm Crimper Tool
C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.
This specific tool is built to handle the stress of crimping stainless fittings. "Nicropress" tools were designed to crimp soft copper and aluminum oval and stop sleeves only.
Specifications:
Two cavities for 1/8" and 3/16" hand crimp fittings
Good production tool for the dealer
|
300.64 |
|
|
Cable Cutter to 1/4" - Felco
C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.
This specific tool will give you a clean, crisp cut through 1/4" sized cables. Swiss made.
|
330.47 |
|
|
C-12 Cutter to 3/8" - Felco
C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.
This specific tool will give you a clean, crisp cut through 3/8" sized cables.
|
563.69 |
|
|
Cooler Tie-Down Kit
C. Sherman Johnson has designed this ergonomic hook to hook turnbuckle to be used to tie down coolers, chairs, dinghies, casting platforms or any other items that need to be secured. The body of the turnbuckle has a cushioned grip which allows adjustment without tools. Knurled nuts lock the turnbuckles in place. The hooks have a 1" opening.
These tie down turnbuckles are constructed of 316 Stainless Steel and the hooks are threaded into bronze inserts to prevent galling. Approximate dimensions are 11-3/4" closed and 15" open. Maximum working load is 1,000 pounds.
Kit Includes: 2 turnbuckles and 2 (48-570) pad eyes
|
170.35 |
|
|
Hinged Pad Eye- 1/4"
C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.
Specifications:
T-316 Stainless Steel construction
Supplied with backing plate
|
31.09 |
|
|
Hinged Pad Eye- 5/16"
C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.
Specifications:
T-316 Stainless Steel construction
Supplied with backing plate
|
59.51 |
|
|
Hinged Pad Eye- 3/8"
C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.
Specifications:
T-316 Stainless Steel construction
Supplied with backing plate
|
49.51 |
|
|
Rigging Tape - White - 1" x 15'
C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.
|
16.88 |
|
|
Rigging Tape - Black - 1" x 15'
C. Sherman Johnson has brought back the self-amalgamating rigging tape that started the craze in the 70's. This tape works well at covering up those exposed cotter pins or any sharp objects that may harm sails, lines, or people. When used as directed, the tape actually bonds to itself and makes one solid piece. It can also be used on hot objects for an emergency repair or radiator hoses, etc. Rigging tape is sold in black or white and packaged in a reusable, retail clamshell pack with color header and instructions.
|
16.88 |
|
|
Tubular Turnbuckle with Splice Eye
*Dyneema Line not included with fittings
C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.
|
42.64 |
|