|
Base Reducer - Pair
If you currently have a set of TACO Marine outrigger poles from your GS-170 mounts, they can still be used if you upgrade your bases to our GS-280 or 380 series. Our TACO Outrigger Base Reducer is the perfect complement to allow your current poles to be used, by reducing the base without missing a beat.
Features:
Reduces Grand Slam base from 1-1/2" to 1-1/8"
Allows the use of GS-170 Outrigger Poles with GS-200 and 300 Series
Nylon, easy-to-install sleeve design
1-year Limited Warranty
|
115.75 |
|
|
16' Telescoping Carbon Fiber Outrigger Poles Sleeved for TACO Bases
Carbon fiber poles are strong, stiff, and perfect for trolling a variety of baits. Up to 26 feet in length, each pole weighs less than 3-1/2 pounds. The Surface finish is 3K sanded with High Gloss Clear Coat. These poles are sold in pairs and designed to fit Lee’s Sidewinders and other major brand outrigger holders. Sold in Pairs.
The perfect solution for trolling a variety of baits.
Features:
Light Weight – Makes deployment, retrieval, raising, and lowering a breeze
Strength – Spreaders become unnecessary
A glossy clear coat finish is standard
Technical Specifications:
Length - 16'
Number of Sections - Four (4)
Mounting Base - Lee's Sidewinder 1-5/8"
Rigging – Double rigging
Maximum Line Strength – 400 lb. monofilament
*Sold as a Pair
|
1390.66 |
|
|
Gen 3 Standard Starlink Antenna Mount with 8 Degree Wedge Base
The Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) has been specifically designed for the harsh marine environment. If it's good for the marine environment then it's ideal for any other outdoor application (RVs, overland vehicles, vans, jeeps, side-by-side, UTV, trucks, etc.). The base aluminum plate has a 3 part polyurethane prime and powder coat and the end pieces are made using machined marine-grade high-density polyethylene to ensure the best possible finish and corrosion resistance.
The Gen 3 Standard Starlink Antenna (sometimes Gen 4 / Standard) now features a convenient pressure-fit kickstand for placement on flat non-mobile surfaces. However, marine or vehicle mounting necessitates additional support. Opting for the Seaview SRM200W Mount is a superior choice, offering a reliable and adaptable mounting solution. You have the option to utilize through-bolts for a permanent fixture through machined holes in the mount's base or pair it with the Seaview 8° Wedge base for a highly versatile installation.
*The SRM200W can be mounted directly or it can be mounted to the Starlink 8° Wedge Base (SVSLWB).
Wedge Base Features:
Designed to fit the Starlink Flat High-Performance Antenna and Seaview SRM200W Mount for the Gen 3 Standard Starlink Antenna.
Pre-drilled mounting holes allow the hardware to fasten directly to the wedge.
Drilled and tapped for the CG30PW (white) or CG30PB (black) cable seal that comes with each Seaview wedge base.
No need to cut the Starlink connectors for installation.
Available in white or black
|
686.40 |
|
|
March 809 815 Series Mag-Drive Centrifugal Pumps
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze with Base 24VDC High Speed 7.5GPM 1/2"MPT Ports
|
498.00 |
|
|
Groco Bp-20-S-Base Casting Pump Base
|
41.24 |
|
|
Gianneschi PM50 REPAIR KIT Pm50 Repair Kit Kpm5001
|
86.36 |
|
|
Gianneschi PM40 REPAIR KIT PM40 Repair Kit
|
86.36 |
|
|
TACO Marine $25 Handle Savings
Take advantage of these special offers from TACO Marine now until March 31st, 2019. Receive $25 via mail-in rebate with the purchase of the Shore Power Cable Holder or the Come On Board Handle.
TACO Marine $25 LED Savings
Take advantage of these special offers from TACO Marine now until March 31st, 2019. Receive $25 via mail-in rebate with the purchase of two TACO Marine LED lights.
TACO Marine $100 Neptune Savings
Take advantage of these special offers from TACO Marine now until March 31st, 2019. Receive $100 via mail-in rebate with the purchase of Neptune Premium and Backrest, Neptune II & Backrest or Neptune III.
TACO Marine Rub Rail Kit $50 Savings
Take advantage of these special offers from TACO Marine. Receive $50 back with the purchase of a TACO Marine Vinyl Rub Rail Kit. Offer valid on purchases made now until April 30th, 2019. Don't miss out on these super savings!
Specials Closeouts Remanufactured Rebates
|
|
|
Don't miss out on TACO super savings now until December 1st, 2019. From Outrigger Mounts to Poles and Kits, select products are now on sale. TACO brings aboard products with a level of unparalleled quality. Check out TACO's Outrigger Sale today!
TACO Marine Provides Innovative, Quality Products. From rub rail and tower hardware to innovative sport fishing products, boat builders, accessory manufacturers, dealers, distributors and retailers alike rely on TACO's design, manufacturing, and distribution expertise to bring their products to fruition on-time, on-budget, and with a level of unparalleled quality that is to be expected from an industry pioneer.
Sale Ends December 31, 2019
Specials Closeouts Remanufactured Rebates
|
|
|
Taco Marine
From rub rail and tower hardware to innovative sport fishing products, boat builders, accessory manufacturers, dealers, distributors and retailers alike rely on TACO's design, manufacturing, and distribution expertise to bring their products to fruition on-time, on-budget, and with a level of unparalleled quality that is to be expected from an industry pioneer.
|
|
|
Now an easy way to manage outrigger lines while on board. With TACO's new clamp-on Outrigger Line Caddy, anglers have an easy way to store line while outriggers are rigged and in the retracted position. By simply clamping the pair of outrigger line caddy ears onto the outrigger pole at the desired distance, the excess rigging line is wrapped around the outrigger caddy ears to keep lines neat and orderly.
Benefits:
Easy clamp-on installation
Designed to fitt all standard outrigger sizes
Durable to withstand the marine environment
Clam shell packaging for durability and product visibility
Features:
Clamp on assembly
Sold in pairs
Fits standard 8',12',15',18' (1-1/8" and 1-1/2" ) outriggers
Durable black nylon
Specifications:
Black nylon
Black rubber reducer bushing
#10 Stainless steel screw and hex nut
|
40.43 |
|
|
Revolution Top Gun Package - 18'
Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt! If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.
This package comes complete with a pair of Revolution Bolt-In Top Gun Radial bases, a pair of 18' Telescoping poles and a complete single line rigging kit with Rupp release clips.
Top Gun Telescoping Poles - 18' Pair
Our 18 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA.
O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases.
Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
Revolution Top Gun Bolt-In Outrigger Holders - Pair
This innovative outrigger base is great for new installations or retrofits on both hard or soft tops. Rupp Revolution Top Gun bases reduce moving parts and offer an efficient and flexible BOLT-IN design that improves durability while reducing cost. Easily bolted into any 'outrigger ready' boat. A quarter turn of the handle disengages the handles locking pin for easy outrigger deployment. The only one of its kind, this product is constructed of aircraft grade anodized aluminum with stainless steel locking components. NO need to lift the outrigger weight for deployment. The outrigger locks itself into position upon retrieval. Rupp Revolutions are designed and manufactured 100% in the USA, utilizing proven materials and processes. All Rupp Top Guns come with a Three Year Warranty and Rupp's 'best-in-class' customer and technical service. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun Poles, either six piece fixed length or telescoping poles in 15' or 18'.
|
2635.56 |
|
|
Revolution Top Gun Package - 15'
Buy Rupp's complete Outrigger System and save money. The Rupp Sportfishing kits make it simple to have your boat ready to fish upon receipt! If your boat came "outrigger ready" with a Rupp outrigger mounting plate or similar plate from TACO or E-TEC Marine - your ready to bolt in a Rupp Outrigger and go.
This package comes complete with a pair of Revolution Bolt-In Top Gun Radial bases, a pair of 15' Telescoping poles and a complete single line rigging kit with Rupp release clips.Top Gun Rigging Kit w/Klickers
Complete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 50ft of white braided nylon halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (2) Swivels. This rigging kit is for small outriggers, 20' and under.
Top Gun Telescoping Poles - 15' Pair
Our 15 foot telescoping pole is comprised of three sections making it the most rigid and durable telescoping pole on the market. Very little flex and robust buttons make Rupp telescoping poles an obvious choice. Our telescoping poles are an ideal match for any of our Top Gun outrigger bases. Every part of these telescoping poles are fully serviceable, easy replaceable and made in the USA.
O.D of outrigger base tube is 1.50", designed to fit perfectly into Rupp outrigger bases.
Revolution Top Gun Bolt-In Outrigger Holders - Pair
This innovative outrigger base is great for new installations or retrofits on both hard or soft tops. Rupp Revolution Top Gun bases reduce moving parts and offer an efficient and flexible BOLT-IN design that improves durability while reducing cost. Easily bolted into any 'outrigger ready' boat. A quarter turn of the handle disengages the handles locking pin for easy outrigger deployment. The only one of its kind, this product is constructed of aircraft grade anodized aluminum with stainless steel locking components. NO need to lift the outrigger weight for deployment. The outrigger locks itself into position upon retrieval. Rupp Revolutions are designed and manufactured 100% in the USA, utilizing proven materials and processes. All Rupp Top Guns come with a Three Year Warranty and Rupp's 'best-in-class' customer and technical service. Forged 4" x 6" mounting flange provides ease of BOLT-IN installation and below top operation. Designed to accept Rupp Top Gun Poles, either six piece fixed length or telescoping poles in 15' or 18'.
|
2507.83 |
|
|
Striker Base Gunnel Mount
F16-0150-F
The TACO Striker skiff flush mount base is the strongest gunnel mount base on the market today.
12 locking positions with our hex nut design including stand up and lay down.
Manufactured to very high standards using marine grade cast 316 stainless steel.
Ambidextrous arms. (will fit both port and starboard bases).
Welded locking adapter for maximum strength.
Removable arms for unobstructed decks.
Template included for installation.
Bases compatible with Lee™, Perko™, & Rupp™ outrigger poles
|
560.89 |
|
|
15' Black/Silver Outrigger Poles - 1-1/8" Diameter
Taco Sport Fishing continues to enhance the thrill of blue water fishing
with the ultimate in telescoping outriggers. Taco Marine's patented
Tele-Outriggers are strong and sturdy even in the roughest seas with
multiple trolling lines. More lines mean more fish! Whether using Taco
Marine's Grand Slam 170 or Striker Base, you'll be sure to find the perfect
fit for a great day of fishing!
Features:
Satin/polished anodized Aluminum
Telescopes to less than 6' for bridge clearance, trailering and storage
Designed for universal use with Grand Slams,S triker Bases and other
Taco Marine mounts that accept 1-1/8"outriggers
Reduces stress on gunnels when used with Striker Bases and T-Tops when
used with Grand Slam 170
15' Tele-Outrigger Poles are perfect for boats 21-26'
Sold in pairs
Available in Black with Silver Rings & Tips and Silver with Silver Rings
& Tips
1-1/8" outside diameter works well with Taco Marine Grand Slam 170
Outrigger mount
|
653.44 |
|