RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.79 | |
RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.32 | |
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 | |
RAM Motorcycle Handlebar Clamp Base with M8 Screws
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.73 | |
RAM Composite Handlebar Swivel Base
The RAM high strength composite rail mount consists of a locking tooth system with a standard diamond plate end. The mount will accommodate rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Installation Instructions:
To mount to a circular rail, simple press the plastic "U" clamp around the rail and then connect and tighten the small nut and bolt to close the U clamp. Next connect the diamond plate to the mounted clamp at the required angle and screw in the other bolt through the diamond plate. Now you are ready to connect any of the RAM composite or any other cradle with two holes positioned 1.912" center to center. Placing a rubber lining (not included) between the tube and the mount for a tube with a diameter less than 1" will help the base grab the rail.
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. You cannot rotate the diamond plate on the U clamp when the cradle is connected.
|
6.05 | |
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate
Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment.
Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.64 lbs
|
38.71 | |
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/B Size 1" Ball, Short Arm & Level Cup™
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Included is a short double socket arm and a Level Cup™.
Compatible with any cups, cans, bottles or mugs ranging from 2.5” to 3.5” diameter.
Mounting Base Dimensions: Accommodates rails 1 1/8” to 1 1/2” in diameter
|
53.78 | |
RAM 1" Diameter Ball Long Double Socket Arm with Diamond Base. Overall Length: 6.62"
The RAM-B-103-C-238U consists of a diamond base and LONG double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Dimensions:
Overall Length: 6.62"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
26.75 | |
RAM® Tough-Strap™ Handlebar Ball Base
The RAM® Tough-Strap™ is the lowest profile rugged mounting solution for any bike or motorcycle handlebars. With two different size straps, easily install the RAM® Tough-Strap™ on any mountain bike, road bike, or e-bike with a simple twist of a knob. This RAM® Tough-Strap™ Handlebar Mount includes a B size ball base so you can attach any RAM® B size socket arm and your desired device holder to complete your solution. The long strap is used for bar diameters ranging from 1.25"-1.38" while the short strap is used for diameters ranging from 0.875"-1". Utilize the extra rubber strip to cut down to the diameter range of 1"-1.125" for a more custom fit. Take the RAM® Tough-Strap™ on your next adventure on and off the road.
Features:
Low profile handlebar mount featuring the new RAM® Tough-Strap™, easily attaching to your handlebar with the turn of a single knob
Includes two different strap sizes for handlebars; Long strap ranges from 1.25"-1.38" diameter and small strap ranges from 0.875"-1" diameter, with an extra rubber strap for a more custom fit ranging from 1"-1.25"
Attach any RAM® B size socket arm and desired device holder for an ideal handlebar mount for all bike types, including mountain bikes, road bikes, and e-bikes
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
(1) #10-24 x 2.5" Machine Screw
(1) Long Strap
(1) Short Strap
(1) Long Rubber Strip
(1) Short Rubber Strip
(1) Tightening Knob
Specifications:
Clamp Range: 0.875"-1.38"
Ball/Socket Size: B Size (1")
Weight Capacity: Standard Use: 2lbs, Heavy-Duty Use: 1lb
Materials: High strength composite
Weight: 0.25lbs
|
14.45 | |
RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter
The RAM-B-176U consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
Metric Standard
12mm
.5 degrees
14mm
.5 degrees
16mm
.63 degrees
18mm
.71 degrees
20mm
.79 degrees
28mm
1.10 degrees
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
|
34.61 | |
Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter
The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
46.37 | |
Small Tough-Claw™ Base w/Short Double Socket Arm and Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-A-HOL-UN7BU consists of the Tough-Claw™ rail clamp base, SHORT length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Cradle Dimensions
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
|
66.07 | |
RAM Mount Universal Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle Universal Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-C-UN7U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM highly recommends adding a secondary tethering device for all open cockpit applications while using this product.
|
74.77 | |
Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter
The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.12 | |
Small Tough-Claw™ Base w/1" Ball & M6 x 30 SS Hex Head Bolt f/Raymarine Dragonfly-4/5 & WiFish
The RAM-B-400-379-M616U consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-400-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.
|
48.68 | |