|
AD XTM 9
Transducer Mounting Hardware
This hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling motor.
For use with:
XNT 9 20 T
XNT 9 QB 90 T
XNT 9 SI 180 T
XNT 9 QB 90
XNT 9 20
XNT 9 DI T
1157c
1158c
1158c DI
141C
161
323
325
343C
345c
345c DI
363
365i
383C
385ci
385ci DI
515
525
535
550
560
561
565
570
570 DI
575
580
581i
585C
586C
586c HD
587CI
587ci HD
595C
596C
596c HD
596c HD DI
597CI
597ci HD
597ci HD DI
717
718
727
728
737
747c
767
768
777c2
778C
778c HD
787c2
787c2I
788C
788ci
788ci HD
788ci HD DI
798c SI
798ci SI
798ci HD SI
858c
858c DI
917C
957
958c
958c DI
981C SI
HDR 610
MATRIX 10
MATRIX 12
MATRIX 15
MATRIX 17
MATRIX 20
MATRIX 25
MATRIX 27
MATRIX 35
MATRIX 37
MATRIX 55
MATRIX 65
MATRIX 67
MATRIX 77C
MATRIX 87C
MATRIX 97
PIRANHA 1
PIRANHA 2
PIRANHA 3
PIRANHA 4
PIRANHA 5
PiranhaMax 10
PiranhaMax 15
PiranhaMax 150
PiranhaMax 160
PiranhaMax 170
PiranhaMax 180
PiranhaMax 190C
PiranhaMax 20
PiranhaMax 210
PiranhaMax 215
PiranhaMax 220
PiranhaMax 230
PiranhaMax 240
PiranhaMax 30
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.83 |
|
|
AD MTM Trolling Motor Adapter for MEGA Transom Transducer
This hardware kit adapts our MEGA transom mount transducer for use on the trolling motor.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.25 |
|
|
AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket
MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit.
Features:
Compatible Transducers: XM 9 HW MDI T, XTM 9 HW MDI T, XM 14 HW MDI T, XTM 14 HW MDI T
Compatible Fish Finders: HELIX 9 CHIRP MEGA DI+ GPS G3N, HELIX 10 CHIRP MEGA DI+ GPS G3N, HELIX 12 CHIRP MEGA DI+ GPS G3N, SOLIX 10 G2 – All Models, SOLIX 12 G2 – All Models, SOLIX 15 G2 – All Models
|
40.90 |
|
|
AD-MTM-HW-MSI MEGA SI+ Trolling Motor Adapter Bracket
MEGA SI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit.
Features:
Compatible Transducers: XM 9 HW MSI T, XTM 9 HW MSI T, XM 14 HW MSI T, XTM 14 HW MSI T
Compatible Fish Finders: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N, SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2
|
40.90 |
|
|
Trolling Motor Adapter Kit
Mount your Airmar TM150M transducer with CHIRP technology to your trolling motor with this adapter kit. Contents include two 3/4" pan head screws, a plastic trolling motor adapter ring, a plastic trolling motor adapter, a metal band clamp and instructions.
Compatible Devices:
GPSMAP® xs Series
GSD™ 25 Premium Sonar Module
GSD™ 26 CHIRP Professional Sonar Module
Plastic Transom Mount Transducer with Depth & Temperature - Airmar TM150M
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.49 |
|
|
Trolling Motor Mount f/GT36 and GT56
Easily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.
|
22.49 |
|
|
Trolling Motor Transducer
Trolling Motor Mount Transducers are designed to mount on to the body of most trolling motors. A low profile shape reduces drag in the water and minimizes interference with weeds. Trolling Motor Transducers are often used in conjunction with the standard Transom Mount Transducer and connected by a switch to allow the fishfinder to display information from either the transom or the trolling motor. Some Transom Mount Transducers can be converted to Trolling Motor Mount by purchasing a Trolling Motor Adapter.
Description: Trolling Motor Transducer with Temperature Sensor, Hydrodynamic, dual beam, 20 and 60 degree cone angles, 200/83 kHz. Includes 15' cable, trolling motor mounting hardware.
For Use With: Piranha 5, Legend ID40, Matrix 15, Matrix 17, Matrix 25, Matrix 17, Matrix 55, Matrix 65, Matrix 67, FF515, FF535, FF565
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
91.07 |
|
|
XTM-9-HW-T Dual Spectrum CHIRP Trolling Motor Transducer with Temp for HELIX®
Trolling Motor Dual Spectrum CHIRP Transducer supports Dual Spectrum CHIRP 2D Sonar with high frequency beam and wide cone angle, offering CHIRP range of 150-220kHz. Includes built-in temperature sensor, rugged composite design and 20’ cable.
Features:
This accessory is compatible with the following Humminbird products: HELIX 5 CHIRP G2 – GPS-equipped models only, HELIX 7 CHIRP G2/G3 – GPS-equipped and CHIRP DI G2 models, HELIX 7 CHIRP G2N/G3N – All models, HELIX 8 CHIRP G3N – All models, HELIX 9 CHIRP G2N/G3N – All models, HELIX 10 CHIRP G2N/G3N – All models, HELIX 12 CHIRP G2N/G3N – All models, ICE HELIX CHIRP G2 – All models (In Open Water Mode).
Side Imaging™ and Down Imaging™ units can support the XTM 9 HW T as a 2D sonar only transducer. This transducer does not support Side Imaging or Down Imaging.
Dual Spectrum CHIRP: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
Dual Spectrum CHIRP Max Depth: 1200ft (365m)
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
85.70 |
|
|
HDI Trolling Motor XDCR Adapter Cup
For using HDI 83/200 and 455/800 kHz XDCR on a trolling motor
|
20.47 |
|
|
Trolling Motor Mount for MK, Garmin, Rhodan, & Power Pole
The Sea Swivel is a heavy-duty marine-grade pivoting bracket designed to maneuver a trolling motor in the correct position while being deployed. This bracket also has the benefit of being able to adjust the stowed position to match the angle of any boat. That means no more anchor hatches covered up and no more trolling motorheads hanging off the side of the boat. All that is needed is an 8" x 8" flat mounting surface and access under the gunwale to tighten the nut. During installation, it is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Features:
Maneuverability and Positioning
The Sea Swivel offers a heavy-duty pivoting bracket that allows users to easily maneuver the trolling motor into the correct position while deployed. This is especially useful for maintaining proper control and direction while fishing or navigating in different conditions.
Adjustable Stowed Position
The ability to adjust the stowed position of the trolling motor to match the angle of the boat is a significant advantage. This means that the trolling motor won't interfere with anchor hatches or hang off the side of the boat when not in use, enhancing the boat's aesthetics and functionality.
High-Quality Materials
The use of 7075T6 aluminum alloy, commonly found in the aerospace industry, provides peak strength and ensures the Sea Swivel's durability. This material choice suggests that the product is designed to withstand the rigors of marine environments and provide longevity.
Corrosion Resistance
The anodized finish is designed to protect the Sea Swivel from the harsh marine environment, which typically includes exposure to saltwater and other corrosive elements. This coating enhances the product's ability to resist rust and other forms of corrosion over time.
Stainless Lock Pin and Hardware
The utilization of all 316 stainless lock pins and mounting hardware further enhances the product's resistance to corrosion, as 316 stainless steel is known for its exceptional corrosion resistance properties, making it well-suited for marine applications.
Backing Plate for Strength
The inclusion of a pre-cut backing plate to be placed under the mounting surface is a smart design choice. This additional plate strengthens the installation area, reducing the risk of damage or failure due to stress or strain over time.
Easy Installation
The patent-pending design and single-bolt mounting system contribute to streamlined installation processes. This can be a significant selling point for customers, as it saves time and effort during setup.
*It is recommended that users apply teff-gel or marine-grade grease to the main bolt threads and the bearing assembly.
Compatibility
The Sea Swivel stands out as a versatile solution seamlessly accommodating many makes, models, and sizes of trolling motors. It makes installation a breeze and comes pre-drilled for the quick-release brackets listed below:
Minn Kota RTA 54/62 (fits all 36V permanent magnet motors)
Minn Kota RTA 55/56 (fits all new Brushless/Quest motors)
Minn Kota RTA17 (fits all 24V motors for smaller units)
Also fits quick-release mounts for the *Garmin Kraken 24v/36v
Rhodan large mount 6 bolt 36v 96/108
Rhodan smaller mount 4 bolt 24v
Power Pole Move PV 36V/24V
Lifetime Warranty
Sea Swivel offers a limited lifetime warranty.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1318.80 |
|
|
Trolling Motor Bracket
Raymarine's Trolling Motor Bracket is made specifically for Raymarine's Dragonfly Transducer.
|
114.98 |
|
|
Trolling Motor Mount for HV-100
Raymarine's Trolling Motor Mount bracket for the HV-100 transducer.
|
56.23 |
|
|
14" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 14" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
14" x 8" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
157.50 |
|
|
16" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 16" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
172.50 |
|
|
18" Straight Trolling Motor Plate for Garmin’s Kraken
The Sea Brackets 18" Straight Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.
Suggested Hardware:
316L stainless steel hardware is recommended for rust prevention
Mounting hardware is included with Garmin's Quick Release Plate System
Backing disk from Sea Brackets or an alternative backing support system
1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts
5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts
Dimensions:
18" x 8" x 1/2"
Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.
|
175.50 |
|