|
RAM Universal X-Grip III Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2
Part #: RAM-HOL-UN9U
The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.
The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III.
Compatible Devices:
Apple iPad
Apple iPad 2
Apple iPad 3
Apple iPad HD
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Motorola XOOM 2
Pandigital R90A200
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Toshiba Thrive
Most 10" Screen Tablets
All devices that maintain the following dimensions below:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Multiple mounting access points on the back of the holder
7. Additional support keeper at the bottom of the holder
8. Will not interfere with electronic ports, speakers and camera
Material:
High Strength Composite with Rubber Tips
Note:
The "U" in the part number reflects product packaged in poly bag.
|
73.32 |
|
|
RAM Universal X-Grip III Tablet Holder for Large Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2 - Includes Yoke Mount
The new RAM X-Grip III line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip III leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.
The X-Grip III consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The X-Grip III expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III.
Compatible Devices:
Apple iPad
Apple iPad 2
Apple iPad 3
Apple iPad HD
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Motorola XOOM 2
Pandigital R90A200
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Toshiba Thrive
Most 10" Screen Tablets
All devices that maintain the following dimensions below:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Multiple mounting access points on the back of the holder
7. Additional support keeper at the bottom of the holder
8. Will not interfere with electronic ports, speakers and camera
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
116.26 |
|
|
RAM Flat Surface Mount® with Long Double Socket Arm & Universal X-Grip® III Holder For Large Tablets
The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal X-Grip® III clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III.
X-Grip® III Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
X-Grip® III Cradle Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of cradle allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
6. Multiple mounting access points on the back of the cradle
7. Additional support keeper at the bottom of the cradle
8. Full access to all ports
9. Lifetime warranty
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
|
105.82 |
|
|
RAM Universal X-Grip® II Tablet Holder with 1.5" Ball for 7'' Tablets including the iPad mini 1-3
The RAM-HOL-UN8BCU consists of a spring loaded holder and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7" tablets.
The X-Grip® holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet
6. Rustproof
7. Lifetime warranty
8. Made in U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
45.20 |
|
|
RAM Universal X-Grip IV Large Phone/Phablet Holder with 1" Ball
The X-Grip IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the X-Grip IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle.
Compatible Devices:
HTC Droid DNA
Huawei Ascend P1
LG Intuition
Nokia Lumia 920
Pantech Vega No. 6
Samsung GALAXY Note II
Samsung GALAXY S III
The X-Grip IV holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Holder Dimensions:
Minimum Width = 1.75"
Maximum Width = 4.5"
Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM ball mounts
6. Lifetime warranty
Material:
High Strength Composite & Stainless Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
30.38 |
|
|
RAM Mount Universal X-Grip Holder Diamond Base Surface Mount
Part #: RAM-B-102-UN7U
The RAM-B-102-UN7U consists of a double socket arm, diamond base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
48.52 |
|
|
RAM Mount Universal X-Grip™ Holder Handlebar Rail Mount
Part #: RAM-B-149Z-UN7U
The RAM-B-149Z-UN7U consists of a double socket arm, handlebar rail mount with zinc coated u-bolt base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Gripȁ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
Samsung Galaxy S7
Samsung Galaxy S7 Edge
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
58.96 |
|
|
RAM Mount Universal X-Grip Holder Yoke Glare Mount
Part #: RAP-B-121-UN7U
RAM Composite Clamp Mount with Universal X-Grip™ Holder. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality composite materials insure your device is safe, secure, and within easy reach. The clamp base fits a rail or edge lip from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base. Extra ball not included with purchase of this mount.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
53.62 |
|
|
RAM Mount Universal X-Grip Holder Composite Surface Mount
Part #: RAP-B-138-UN7
The RAP-B-138-UN7 consists of a double socket arm, 2.5" round base base and universal spring loaded X-Grip™ holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the suction cup X-Grip™ mount to your optimum viewing position. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite, Rubber Tips & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
42.65 |
|
|
RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large Tablets
The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip® III clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III.
The RAM X-Grip® III cradle is compatible with the following tablets WITH OR WITHOUT CASE:
Apple iPad Air
Apple iPad 4 (With Lightning Connector)
Apple iPad 3
Apple iPad 2
Apple iPad 1
HP TouchPad
Asus EEE Pad
Asus Eee Pad Transformer
Lenovo LePad Slate & IdeaTab Lynx
LG G-Slate
LG Optimus Pad
Microsoft Surface
Motorola XOOM
Motorola XYBOARD 10.1
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Samsung Galaxy Tab 2 10.1
Samsung Galaxy Tab 3 10.1
Toshiba Thrive
Most 10" Screen Tablets
X-Grip® III Cradle Features:
1. Spring loaded cradle expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of cradle allows for attachment to many 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet
6. Multiple mounting access points on the back of the cradle
7. Additional support keeper at the bottom of the cradle
8. Full access to all ports
9. Lifetime warranty
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The RAM-B-316-1-UN9 is not compatible with the Apple iPad with LIFEPROOF NUUD CASE
|
116.17 |
|
|
Universal X-Grip Holder f/12" Tablets
The new RAM X-Grip line of products just got bigger and better. This new model is just what you've been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don't. Simple to open and close, the spring loaded RAM X-Grip leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.
The RAM-HOL-UN11U holder expands and contracts for perfect fit of most 10" and 12" tablets with or without sleeves, as well as some smaller tablets. This holder by RAM consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper.
** The RAM-HOL-UN11U is compatible with the iPad Pro WITHOUT CASE ONLY. **
Compatible Devices (WITH OR WITHOUT CASE):
Microsoft Surface Pro 3
Samsung Galaxy Note® Pro 12.2
Most 12" Screen Tablets
X-Grip Holder Dimensions:
Minimum Width = 7.25"
Maximum Width = 8.75"
Maximum Length (WITHOUT additional supports) = Unlimited
Maximum Length (WITH additional supports) = 10.25"
Depth = 0.875"
X-Grip Holder Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of cradle allows for attachment to many 1" socket mounts
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Made in the U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
74.69 |
|
|
Universal X-Grip® Cradle with 1" Ball & STANDARD Length Double Socket Arm for 7" Tablets
Consists of a STANDARD length double socket arm and universal X-Grip® clamping cradle for 7" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"
Specs & Features
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Rustproof
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.5 lbs.
Compatible Devices:
7" Screen Tablets
Amazon Kindle Fire
Amazon Kindle Fire HD
Amazon Kindle Fire HDX
Apple iPad mini
Apple iPad mini 2
Apple iPad mini 3
Apple iPad mini 4
Nexus 7
Samsung Galaxy Tab 2 7.0
Samsung Galaxy Tab 3 7.0
Samsung Galaxy Tab 4 7.0
Samsung Galaxy Tab A 8.0
Samsung Galaxy Tab S2 8.0
Samsung Galaxy Tab S 8.4
|
50.02 |
|
|
Universal X-Grip® Holder w/1" Ball Base
The RAM-B-202-UN9U consists of a composite spring loaded cradle, expandable grip arms, additional bottom support keepers and 1" ball base adapter. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-B-202-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. The included 1" ball base includes hardware to attach directly to the back of the cradle and is compatible with all "B" size double socket arms. Please verify dimensions of your tablet below for compatibility with the X-Grip®.
The X-Grip® holder is compatible with tablets devices that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"
Maximum Length (using additional supports) = 10.25"
Features:
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Versatility of cradle allows for attachment to many 1" socket arms
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Multiple mounting access points on the back of the cradle
Additional support keeper at the bottom of the cradle
Full access to all ports
Lifetime warranty
Made in the U.S.A.
Material:
Marine Grade Stainless Steel Components & High Strength Composite
|
79.69 |
|
|
RAM Universal X-Grip Holder Brake/Clutch Reservoir Mount
Part #: RAM-B-174-UN7
The RAM-B-174-UN7 consists of a double socket arm, hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter and universal X-Grip™ cell phone holder. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the cell phone holder to your optimum viewing position. The spring loaded X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic.
X-Grip™ Holder Features:
1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable
X-Grip™ Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Note: Part number reflects product packaged in clear clam shell for store shelf display. To see if the RAM-B-174-UN7 will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
|
63.18 |
|
|
RAM Universal X-Grip Cell Phone Holder w/1" Ball
Part #: RAM-HOL-UN7BU
Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.
Compatible Devices:
Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case
Apple iPhone (1st Generation)
Apple iPod touch (All Models)
Apple iPod (G1-G5)
All devices that maintain the following dimensions below:
Holder Dimensions:
Minimum Width = 0.875"
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25"
Depth = 0.875"
Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device
Material:
High Strength Composite with Rubber Tips
Ball Size:
1" Rubber Ball "B" Size
|
27.29 |
|