|
AS-T-Y
Features:
Enables use of Humminbird temperature sensor accessory
For use with 700 Series Ethernet models only
Compatibility:
700 Series™: Ethernet Models - 778c HD, 788ci HD, 798c HD
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.52 |
|
|
Temp/Speed Sensor
Temperature range of 25-99.9 degrees F.
Speed range of 2-75 MPH.
Note: Requires purchase of AS T Y cable to connect with HELIX 5 Series, HELIX 7 Series, 600 Series, select 700 HD Series, 8x9 ci Series, 9x9 ci Series and 11x9 ci Series.
1-Year Limited Warranty
Compatibility:
Current Models: HELIX 10, HELIX 12, HELIX 5, HELIX 7, HELIX 9, SOLIX 12, SOLIX 15
Discontinued Models: 1100 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series, ONIX
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
74.51 |
|
|
Y Cable for 2 CHIRP Transducers for CP470/CP570
Raymarine Y Cable specifically for two CHIRP transducers for Raymarine's CP470 and CP670.
|
61.36 |
|
|
2-Pin Power Cable
Use Garmin's 2-pin power cable with your GPSMAP® 4xxx Series or GPSMAP® 5xxx Series.
Compatible Devices:
GPSMAP® 4xxx Series
GPSMAP® 5xxx Series
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.39 |
|
|
20M Power & Ethernet Cable for HALO 2000 & 3000 Series
Simrad's power and ethernet 20-meter cable specifically for the HALO 2000 and 3000 series.
|
202.80 |
|
|
Video Cable F-Type to BNC - 25'
25' Cable - F-Type on one end, BNC on the other end
For use with MD-Series
|
82.58 |
|
|
Video Cable F-Type to BNC - 50'
50' Cable - F-Type on one end, BNC on the other end
For use with MD-Series
|
102.01 |
|
|
Video Cable F-Type to BNC - 75'
75' Cable - F-Type on one end, BNC on the other end
For use with MD-Series
|
140.88 |
|
|
Video Cable F-Type to BNC - 100'
100' Cable - F-Type on one end, BNC on the other end
For use with MD-Series
|
150.59 |
|
|
Active Imaging 2-In-1 & 83/200 Package with Y-Cable
Active Imaging 2-in-1 Transducer
Active Imaging is a scanning sonar technology that provides incredibly detailed, high-resolution imaging sonar without sacrificing any range. Active Imaging transducers accomplish this by better directing the SideScan beams which increase resolution and improve range performance
Active Imaging is available in two models:
The Active Imaging stand-alone transducer lets the user combine the new Active Imaging transducer with a separate CHIRP transducer for dual transducer installs.
Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
Active Imaging utilizes the latest techniques in sonar signal generation
Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to the water. This ensures that no sonar signal is lost during transmit or receive
Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Features:
Active Imaging sonar offers no compromise high-resolution detail to users
800kHz operation covers many use cases and ranges.
With 800kHz range and resolution capabilities users do not need to choose between seeing in High detail or seeing far
High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
Environmental
Operating temperature: -15°C to +55°C (+5°F to +131°F)
Storage temperature: -30°C to +70°C (-22°F to +158°F)
Physical
Cable length: 7.6 m (25 ft)
Mounting options: Transom, flush step, and jack plate mounting
Connector: 9 pin
Transducer
Output: SideScan imaging, DownScan imaging, and temperature
Frequency: 455 kHz and 800 kHz
Max depth: DownScan: 91 m (300 ft): SideScan: 91 m (300 ft) side range at 455 kHz, 46 m (150ft) side range at 800 kHz
Operating speed: DownScan and SideScan: 9 knots (10 mph)
9-Pin High-Speed Skimmer Transducer 83/200 kHz
9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector.
Features:
Transom Transducer
High-Speed Skimmer
83/200kHz with Temp
9-Pin Connector
|
394.80 |
|
|
14-M360-2DDI-Y - MEGA 360 & 2D/MDI 14-Pin Y-Cable
This Y cable allows for the connection of a MEGA 360 Imaging transducer and a 14-pin HW / MDI+ transducer (including Built-in MEGA Imaging) to the same compatible Humminbird fish finder.
Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter.
For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin HW /MDI+ transducer.
If this cable is being used with a HELIX fish finder, then the #720106-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable.
Compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors
30" (76 cm) cable on Dual Sprectrum CHIRP side of cable
10' (3 m) cable on the MEGA 360 side
Waterproof, screw-on, 14-pin connectors
1-Year Limited Warranty
|
59.99 |
|
|
14 M SILR Y - SOLIX®/APEX® Side Imaging Left-Right Splitter Cable
The 14 M ID SILR Y cable allows for two Side Imaging transducers to be connected to into a single sonar input on a Humminbird chartplotter. This y-cable utilizes the two Side Imaging transducer to act as independent port and starboard Side Imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear picture on each side of the vessel. This rigging cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.
Features:
Compatible with: All SOLIX and APEX models
Combines two Side Imaging transducers together, acting as independent port and starboard Side Imaging sonar sources and can then be connected to a single Humminbird control head.
Includes transducer ID for Airmar® accessory transducers when used in combination with 14 M ID SIDB Y (#720111-1)
Cable length: 30" (76 cm)
1-Year Limited Warranty
|
51.42 |
|
|
V10 Series RCA Audio Y Cable - 2 Channel - 1 Female to 2 Males
T-Spec's Y cable will send your musical signals cleanly across the veritable battlefield of induced noise and uncertain factory electronics in your vehicle, so you'll enjoy all of your music with none of the noise. T-Spec RCA cables resist noise due to their shielded construction and the double twisted pair arrangement of the wire inside their jackets.
Recycled copper often contains impurities that can impair a wire's conductivity, so T-Spec uses only oxygen-free non-recycled, virgin copper to maximize signal flow in their patch cables. Each machined metal RCA plug features a patented 4-way split tip that guarantees the best possible electrical contact. T-Spec's proprietary PVC jacket gives each cable great flexibility for easier installation, and the durability required for marine certification.
Features:
Double twisted-pair design minimizes noise from your system
Oxygen-free virgin copper
Split-tip RCA connectors for maximum contact area
Ultra-flexible PVC blended jacket
Marine compliant
In the Box:
1 10" RCA Audio Y cable - 1 Female to 2 Males
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.89 |
|
|
V10 Series RCA Audio Y Cable - 2 Channel - 1 Male to 2 Females
T-Spec's Y cable will send your musical signals cleanly across the veritable battlefield of induced noise and uncertain factory electronics in your vehicle, so you'll enjoy all of your music with none of the noise. T-Spec RCA cables resist noise due to their shielded construction and the double twisted pair arrangement of the wire inside their jackets.
Recycled copper often contains impurities that can impair a wire's conductivity, so T-Spec uses only oxygen-free non-recycled, virgin copper to maximize signal flow in their patch cables. Each machined metal RCA plug features a patented 4-way split tip that guarantees the best possible electrical contact. T-Spec's proprietary PVC jacket gives each cable great flexibility for easier installation, and the durability required for marine certification.
Features:
Double twisted-pair design minimizes noise from your system
Oxygen-free virgin copper
Split-tip RCA connectors for maximum contact area
Ultra-flexible PVC blended jacket
Marine compliant
In the Box:
1 10" RCA Audio Y cable - 1 Male to 2 Females
Instruction sheet
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.89 |
|
|
9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX
Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only. Allows the use of two side imaging transducers with one unit without the need for a transducer switch.
Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.
Allows the use of two side imaging transducers with one unit without the need for a transducer switch.
Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.
30" length.
Supports MEGA Side Imaging.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
40.00 |
|