Vision Series Universal Mounting Plate - 15" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 15" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No Holes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome. Mounting Plates are required to complete an Edson Vision Series Mounting Series. Order Base Mount separately.

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

GPS Mount with Light Extension Adapter Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.  *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.* The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Attwood LED 12V Combination Anchor/Streaming Light Edson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters) The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Wing w/Light Arm Receiver Edson's 68800 Wing Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts while providing two wings to mount adding space for GPS Antennas and other electronics. Edson's Wing Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Specifications: Base Mount and Mounting Plate sold separately For Vertical Mounts 37" Wide

The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas.  It is constructed from lightweight aluminum and is powder-coasted white for a durable finish.  For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System. Features: Rugged Design Marine-grade aluminum construction Powder-coated white Rivets included for mast attachment Easy installation First all modular system - extremely versatile Simple selection and installation Requires Vision Mounting Plate to install radar or sat dome antenna Mast Mount Radar Platform For sailboats and trawlers Swivel Feet fit most masts Rivets included

Edson International will introduce a new Radar, Satellite Antenna and Accessory Mounting System at the upcoming Miami Boatshow. Known as the Vision Series, the new product line delivers styling and design features unlike any mounting solution currently available. All-new sleek, modern design. First all modular system - extremely versatile. Easy to select and install for any radar, dome, light or camera combination. Easy to add accessories. Upgradable for future additions and modifications. Powder coated aluminum construction   Designed and manufactured at Edson's Massachusetts facility, the new towers provide a cost effective yet performance enhancing solution to mount the latest electronic radar & satellite domes, cameras, lights, and antennas on a wide range of power boats. A unique series of Mounting Plates allow the customer to mount any manufacturer's antenna on to any Edson Vision Series Tower, greatly simplifying the ordering process for the customer and stocking requirements for the dealer. The Vision Series towers will be available in single, dual and the first production triple mount configuration. Also available are standardized mounts to fit a wide range of products allowing electronics installers to stock a single product for multiple applications. "The Edson Vision Series is a stylistic departure from what our industry is used to seeing in an electronics mount,"says Rick Cowen, Product Manager for Edson's NavCom line. "These towers are really going to turn some heads and visually enhance the lines of powerboats, new and old."   See all Edson Products at Edson Marine ( http://www.clrmarine.com/462m4/manufacturers/edson-marine.html )   Vision Series mounts are available in a variety of standard and customized heights to fit most recreational powerboat designs. The unique Mounting Plates, Optional Antenna Wings, and Light Arms are easily added to the basic towers allowing a versatile, but simple installation for multiple antennas, receivers and lights. Custom height towers and configurations will also be available.   SEE THE EDSON VISION SERIES ELECTRONICS MOUNTING SYSTEM AT MIAMI BOATSHOW CONVENTION CENTER ELECTRONICS ROOM - BOOTH #1686

Universal Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Universal Mounting Plate fits most brand and models 2kW, 4kW and Braodband Radars.  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Furuno & Sitex Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and  Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Intellian/KVH/Raymarine/Sea King/SeaTel Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Raymarine 33STV & 37STV , Sea-King 15, SeaTel C14, Intellian i1, i2, &i3, and KVH M1, M2, M3, V3, TV1, TV3. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Mounting Plate for Simrad HALO™ Open Array Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family. The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style. Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Garmin 4ft Open Array Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately