Light Arm for Open Array Radars Edson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

Light Arm for Radar Domes and Sat Domes Edson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome.  Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights. Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical).  Specifications: Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately) Base mounts sold separately

1-1/4" Black Light Bar for Open Array Radar up to 4.5' - Must Pick LTB Top Seaview light bars are made from aluminum and powder-coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars are also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.

Light Arm Receiver for Aft Angled Mounts The Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

GPS Mount with Light Extension Adapter Edson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light.  *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.* The 67400 GPS Mount with Light Extension Adapter requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Light Arm Receiver f/Vertical Mounts Edson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.  Base Mount and Mounting Plate sold separately.

1-1/4" Light Bar for Open Array Radar Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25" in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters, etc. What's also unique with Seaview light bars is that many can fold over 90° to allow for extra height clearance. Easy Installation Secured with a stainless steel clamp, simply use the supplied four bolts.  

Garmin 4ft Open Array Mounting Plate With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4).  Specifications: Mounting Plates are required to complete an Edson Vision Series Mounting System.  Base mounts sold separately

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array Radars The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements. Features: All-new sleek, modern design First all modular system - extremely versatile Simple selection and installation Easy to add accessories Powder coated aluminum Requires Vision Mounting Plate to install radar or sat dome antenna 6" Heavy Duty Aft Mount 6" Tall Aft raked 30 degrees

Vision Series Mounting Plate for Simrad HALO™ Open Array Edson's Vision Series Mounting Plate allows the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy-duty mounts. If you wish to use one of the Edson Vision Series Mounts, available in single, double, and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family. The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder coat. This American-crafted mount is built to handle all of your adventures on the water, with style. Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.

Attwood LED 12V Combination Anchor/Streaming Light Edson offers the 67510 Attwood LED Anchor/Steaming Light (72" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. With 3NM of 360° visibility while drawing a fraction of the power of traditional incandescent lights, Attwood's 3NM LED Masthead/Anchor light is one of the first of its kind. Constructed of corrosion resistant composites with stainless steel accents, this product was designed for the harsh coastal marine environment. For use on boats up to 65.6 ft. (20 meters) The 67510 Attwood LED Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

Perko Combination Anchor/Steaming Light (50" Wire Length) Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. All-Round White Light with 12 volt bulb and is constructed of Black Polymer and Chrome Plated Zinc Alloy Top.  Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in Length The 67500 Perko Combination Anchor/Steaming Light requires an Edson Light Arm that is secured to a Vision Series Base Mount with a Light Arm Receiver and Radar Mounting Plate. Order Edson's Light Arm, Light Arm Receiver,  Base Mount and Mounting Plate separately.

23.75" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must. Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount. Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Separately

28" Pre-Drilled Dual Mount for Open Array Radars Up to 4.5' - Black - Top Plate Required Install your sat dome, camera, or other marine electronics above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars, while the top mounting plate is modular and sold separately. The oval hollow mast section allows for easy cable management. Compact Design Specifically designed to not take up a large number of space results in the perfect solution where space saving is a must.   Eliminate Interference A Dual Mount gives your radar or satdome extra height clearance to tower above anything that could obstruct its view, while still maintaining a small footprint. This also allows for all electronic cables to pass through one hole for a cleaner installation. Universal The lower platform is welded onto the main body of the mount. This platform comes pre-drilled for just about all open and closed dome radars. The above image shows a lower platform on a dual mount that’s for a closed dome radar. When selecting a Seaview dual mount be sure to check to make sure that the particular one you are looking at is for a closed dome radar or an open array radar. The dual mounts that are for an open array radar have an extended lower platform so that the antenna clears the main body of the mount.   Modular Top Plate The top platform is where you bolt the Top Plate to. Seaview developed the Top Plate to make product selection easier for the customer and to enhance the look of these mounts. Long gone are the days of top plates with a bunch of holes in them.  *Top Plate Sold Seperately

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar Domes With Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately.