|
1000 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 3/4"
Includes Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 50 l/min - 800 GPH
Capacity straight (13.6V/27.2V): 63 l/min - 1000 GPH
Amperage: 3.2 A
Fuse size: 5 A
Connection: 3/4"
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 14.4 oz.
|
85.92 |
|
|
750 GPH Ultima Combo Automatic Submersible Bilge Pump 12V
Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.
CE-Approved
Features:
Pre-configured with an electronic Ultima Switch for automatic operation
Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
Extremely energy efficient
Water-cooled motor for long service intervals
Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Pump body: Thermoplastic
Shaft seal: Lip seal
Shaft: Stainless steel
Voltage: 12v
Wire size: 16GA
Hose size: 3/4"
Includes Dura-port connection
Specifications
Capacity 3ft (0.9 m) head (13.6V/27.2): 44 l/min - 700 GPH
Capacity straight (13.6V/27.2V): 50 l/min - 800 GPH
Amperage: 3 A
Fuse size: 5 A
Connection: 3/4"
Length: 4.41" (112 mm)
Width: 4.25" (108 mm)
Height: 3.35" (85 mm)
Weight: 14.4 oz.
|
79.26 |
|
|
Automatic Submersible Bilge Pump - Ultima Switch
01674-001
Heavy-Duty, high-performance pump
Exceeds the tough demands of commercial and recreational duty
Liquid Cooled
12-Pole motor with double ball bearings
Lip Seal design construction
Prewired with automatic float switch(with Manual Over-ride Operation)
Optional and removable check valve included
1-1/8" & 1-1/4" hose adapters included
3 year warranty
|
136.30 |
|
|
Automatic Submersible Bilge Pump - Ultima Switch
02274-001
Heavy-Duty, high-performance pump
Exceeds the tough demands of commercial and recreational duty
Liquid Cooled
16-Pole motor with double ball bearings
Lip Seal design construction
Prewired with automatic float switch(with Manual Over-ride Operation)
Optional and removable check valve included
1-1/8" & 1-1/4" hose adapters included
3 year warranty
|
151.12 |
|
|
Yanmar 128397-42500 Engine Cooling Pump Bronze
Yanmar Engine Cooling Pump, Bronze, Full Cam, 3/4" Slip On Ports. Comes with Pulley and Mounting Bracket.
GMF YEU series, Johnson 10-24509-01 F4B-903
|
299.88 |
|
|
Scot Pump SC 131-000-806-4.75 for Scot Pump 57017-2
|
501.67 |
|
|
Thru-Hull Connector - 3/4" - 90° - White
90 Degree Thru-Hull Connector - When looks are important, these are the 90 degree fittings to use. The outside nut is secured to the threaded shaft with a deck plate key. There no threaded section protruding through the head or in need of sawing so its always a neat, finished installation.
Features:
Outside nut is secured to the threaded shaft with a deck plate key
No threaded section protruding through the head or need for saws
Makes for a neat, finished installation
Built with Johnson Pump quality
|
8.71 |
|
|
Laing D5-38 790N, 8-24Vdc Pump
Laing Ecocirc Pump Noryl Vario Series, 5GPM at 3' Head (12V), 8-24VDC 3-35Watts Adjustable, 3/4” Hose Barb Ports, Mounting Bracket, 140Degree, 50psi
|
294.58 |
|
|
Laing DDC-3.2tp, Computer Cooling Pump 12V
Laing Computer Cooling Pump DDC Series, 2.2GPM at 0' Head, 8-13.2VDC 18Watts, Tach Output, 4 Pin Molex Connector, 3/8” Hose Barb Ports, No Mounting Feet.
|
252.40 |
|
|
Laing DDC-3.2TPMP Computer Cooling Pump 12V
Laing Computer Cooling Pump DDC Series, 2.2GPM at 0' Head, 8-13.2VDC 18Watts, Tach Output, 4 Pin Molex Connector, 3/8” Hose Barb Ports, Mounting Feet Parallel to Inlet.
|
252.40 |
|
|
Laing DDC-3.1Tp, Computer Cooling Pump 12V Pump
Laing Computer Cooling Pump DDC Series, 1.75GPM at 0' Head, 8-13.2VDC 12Watts, Tach Output, 4 Pin Molex Connector, 3/8” Hose Barb Ports, No Mounting Feet.
|
240.24 |
|
|
Little Giant Mag-Drive Pump 581603
Little Giant 3-MD-HC Magnetic Drive Pump
Motor 115 Volt 60 Hz 1/12 HP Open Fan Cooled Motor, 750 GPH at 1 Foot Head, Shutoff Head 21.9 Feet, Inlet: 3/4" FNPT, Outlet: 1/2" MNPT, Ryton Body, Fluid Temperature Up to 200F (93C), UR/C-CSA Listed, 6 Foot Power Cord
581603 Magnetically driven pump for highly corrosive chemicals and solutions. The MD-HC Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.
|
567.00 |
|
|
Aerator Head - 9-3/4" Spray Bar with Shut Off Valve
Overall length 9-3/4", 3/4" thru-hull, one shut off valve
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
24.68 |
|
|
Pumpgard In-Line Strainer 3/4 Hose - 40 Mesh
Inlet strainer protects all-electric diaphragm pumps. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing allows instant inspection. Quick, in-place cleaning of the 40 mesh stainless steel screen.
|
24.30 |
|
|
Spare Motor for Cartridge
Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.
|
37.75 |
|