The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Simrad SimNet Product to NMEA 2000 Network Adapter Cable The Simrad SimNet Product to NMEA 2000® Network Adapter Cable, manufactured by Simrad, is used to connect a Simrad SimNet product like the NMEA 2000®/NMEA 0183 Adapter (AT10) or CX NavStation Series products to an NMEA 2000® network as shown in the following diagram. The cable is 0.5 meters in length and has a female SimNet connector on one end and a standard male NMEA 2000® Micro Series connector on the other end.

AXIOM Power Cable 1.5M Right Angle & NMEA 2000 Connector Features: AXIOM Power Cable 1.5M Right Angle NMEA 2000 Connector 90°

Analog Rudder Angle Indicator The analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a vessels rudder. All ComNav Autopilots come with built in electronics to drive at least three meters without additional interfacing. Features: Flush mount Water resistant front face Supply voltage for lighting 12-32VDC

GRF™ 10 - Rudder Feedback Sensor Compatible Devices Pair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rudder stops while sailing or boating. The GRF 10 uses a magnetic sensor to relay position information, eliminating friction that causes other types of sensors to wear out. The arm of the GRF 10 is connected to the rudder of the boat and relays position information through the sensor to the mariner so they know where the rudder is - giving them an added peace of mind when starting from a stopped position, docking, launching or moving at slow speeds. Additionally, the GRF 10, allows sailors to: Know where the rudder is positioned without having to look back Make smoother maneuvers and avoid over-compensating Save undue wear and stress on their autopilot system by eliminating force on the rudder when it's already stopped left or right. Specifications: 6.5" Cable Max cable length 49' Compass safe distance 3.2' WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GND™ 10 Black Box Bridge The Garmin GND 10 black box bridge seamlessly integrates Nexus instruments and sensors with the Garmin family. It converts data between the Nexus network and NMEA 2000 to provide trouble-free compatibility between Nexus and Garmin products including gWind and gWind Race wind transducers. Simple plug-and-play installation between Nexus and NMEA 2000, with USB connectivity eliminates need for user setup and system configuration. GND 10 allows PC applications, such as NexusRace, Expedition, Adrena or SeaTrack, to communicate sailing-specific functions between Nexus and NMEA 2000 networks. It also enables GND 10 software updates over NMEA 2000. Existing NexusRace PC application can be used to update software, configure and calibrate Nexus devices over USB using the FDX protocol. Features: Converts data between the Nexus network and NMEA 2000 Provides trouble-free compatibility between Nexus and Garmin products Simple plug-and-play installation between Nexus, NMEA 2000 and USB No user setup or system configuration required Allows PC applications such as NexusRace, Expedition, Adrena, or SeaTrack, to communicate sailing specific functions between Nexus and NMEA 2000 networks Enables GND 10 software updates over NMEA 2000 Existing NexusRace PC application can be used to update software, configure, and calibrate Nexus devices over USB using the FDX protocol Lighting levels of Nexus Marine instruments can be set from equipment connected to NMEA 2000 Allow setting and resetting of race start timers and distance logs from Garmin equipment connected to the NMEA 2000 network In The Box GND 10 USB Mini-B cable NMEA 2000® drop cable (2 m) NMEA 2000 T-connector Nexus network cable (5 m; straight connector) Mounting hardware Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

M510 EVO VHF with AIS & NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver is integrated in the M510 PLUS EVO 51 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Integrated AIS Receiver* With its integrated AIS receiver*1 or external NMEA sentence*2, the IC-M510 can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen. *1 AIS receiver is not included, depending on the transceiver version. *2 Optional MA-510TR or third-party AIS receiver/transponder. Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

M510 EVO VHF with NMEA 2000 The IC-M510 EVO is a multifunctional and stylish VHF marine transceiver that also features innovative smartphone operation technology. Its built-in class D DSC provides essential maritime communication, supporting safety on the water. Integration with built-in NMEA 2000™ connectivity and two-way hailer/RX hailer functions enhances the experience at sea even more. Simple remote control through a smart device enables an unprecedented onboard communication experience. In addition, the product features a color display, navigation functions, and a stylish design that won an iF design award. It can be used for pleasure boats, fishing boats, and sailing, as well as in rescue and public safety. *AIS receiver not included in the M510 EVO 41 NMEA 2000™ and Loud 25 W Two-Way Hailer/20 W RX Hailer Now Built-in The NMEA 2000™ network provides plug-and-play data communication to inter-connect with other marine equipment such as an MFD (Multi-Function Display.) The radio can send GNSS (GPS) position, AIS information*, DSC call, and radio channel data to other equipment. When connected to the optional SP-37 speaker horn, users can talk with the crew on the deck or shore via the radio's microphone and hear any reply via the horn speaker. The RX hailer function lets users listen to the radio traffic on the deck or tower through the hailer speaker. Users can also sound foghorn patterns from the hailer speaker. Radio Control & Intercom Through Smart Devices Use the RS-M500 app (for iOS/Android) to wirelessly control the IC-M510 EVO through the radio’s WLAN feature.  Users can use up to three smart devices as a wireless microphone, intercom between a device and the M510, and a simple remote control for specific functions.    Award Winning Sleek Design - iF DESIGN AWARD 2022 The IC-M510 series (including the IC-M510 EVO) is a winner in the world-renowned iF DESIGN AWARD 2022. The radio can be installed in either panel or trunnion mounting and has a sleek design that looks great on a boat's black glass cockpit dashboard. Wide Viewing Angle Color TFT LCD The color TFT LCD provides nearly a 180-degree viewing angle. The wide-viewing-angle display has high-resolution characters and function icons. Hold down the DISP key to switch the night mode screen, ensuring good readability in low-light conditions. Built-in Class D DSC, “Distress” Button Can be a Lifesaver in an Emergency Situation With just a press of the “DISTRESS” button, the built-in DSC (Digital Selective Calling) system can digitally transmit distress information to the Coast Guard and/or other vessels. The DSC watch function continuously monitors the DSC channel (Ch. 70) for added safety and security. 15 W Speaker Provides Clear and Loud Audio The built-in waterproof speaker enhances the received audio and provides powerful, clear audio.  Simplified Navigation Function The navigation function guides users to a specified waypoint or AIS target. Users can assign up to 100 destinations as waypoints, such as favorite fishing spots or starting positions for yacht races. Combined with MA-510TR Supports Safer Navigation When connected to the optional MA-510TR Class B AIS transponder, users can send and receive real-time information about vessels, including identity, position, speed, course, and other relevant data, displayed on the screen. Making a vessel's position known to others helps prevent collisions and accidents, especially at night, in rough weather, or on crowded shipping routes. The MA-510TR enhances safety during navigation at sea. Active Noise Canceling Technology The Active Noise Cancelling digitally removes background noise from both transmit and receive audio and provides clear communication in a noisy maritime environment. Other Features: Integrated GNSS receiver (selectable from either internal GPS antenna or use optional UX-241 GNSS antenna) IP68 advanced waterproofing (1 m depth of water for 60 minutes) Voice Scrambler with optional UT-112A AquaQuake™ prevents audio degradation from a water-logged speaker Supplied HM-205RB speaker-microphone can be connected to either the front or rear panel to meet to user's requirement External speaker connection Optional HM-195 CommandMic™ are available Supports 4-digit channels Supplied waterproof flash mount gasket for panel mount Specifications: General Specifications: Frequency range: TX: 156.025 157.425 MHz; RX: 156.050 163.275 MHz; DSC: 156.525 MHz; AIS1, 2*1: 161.975, 162.025 MHz Usable Channels: USA, CAN, INT, WX channels Type of Emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)*1 Power Supply Requirement: 13.8 V DC (11.7 15.9 V DC) Current Drain (at 13.8 V DC): TX 25 W output: 5.0 A; RX Max. audio: 1.6 A, 2.0 A (with HM-195), 4.0 A (with extSP), 7.3 A (with ext SP, RX hailer, and HM-195) Operating Temperature Range: –20 degrees C +60 degrees C, –4 degrees F +140 degrees F Antenna Impedance: 50 Ω Dimensions (W x X x D): 175 x 110 x 53 mm, 6.8 x 4.3 x 2.1 in Weight (approx.): 730 g, 1.6 lb (not including microphone) Transmitter Specifications: Output Power (at 13.8 V DC): 25 W, 1W Max. Frequency Deviation: ±5 kHz Frequency Tolerance: ±0.5 kHz Spurious Emissions: Less than −70 dBc (at 25 W) Residual Modulation: More than 40 dB Adjacent Channel Power: More than 70 dB Receiver Specifications: Sensitivity (at 12 dB SINAD): –10 dBμ typical DSC (1% BER): –1 dBμ emf typical Adjacent Channel Selectivity: More than 75 dB DSC (1% BER): More than 73 dBμ emf Spurious Response: More than 75 dB DSC (1% BER): More than 73 dBμ emf Intermodulation: More than 75 dB DSC (1% BER): More than 68 dBμ emf Hum & Noise: More than 40 dB Audio Output Power: More than 15 W (external speaker) Audio Output Power (at 10% distortion with 4 Ω): 20 W typical (RX Hailer), 25 W typical (Hailer) Wireless LAN Specifications: Wireless LAN standard: IEEE802.11 b/g/n Authentication and Encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES) Channels: 1 to 13 (2.4 GHz band)*2 Output Power: Less than 10 mW/MHz Supplied Accessories: Speaker microphone, HM-205RB Microphone hanger DC power cable Mounting bracket kit Flush mount gasket *1 Only for the Integrated AIS version. *2 May differ depending on the country of use.

NMEA 2000® Backbone/Drop Cable - 1' (0.3M) - *Case of 10* Extend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable. Compatible Devices: AIS™ 300/600 Blackbox Transceiver GBT™ 10 GCL™ 20 Low-light Imaging Camera GDL™ 40 GET™ 10 GFL™ 10 GFS™ 10 GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™ GHP™ 20 Marine Autopilot System with SmartPump GMI™ 10/20 Marine Instrument GPS 19x NMEA 2000® GPSMAP® Series VHF 200/300 Marine Radio VHF 300 AIS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000® Backbone/Drop Cable - 6' (2M) - *Case of 10* Extend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable. Compatible Devices: AIS™ 300/600 Blackbox Transceiver GBT™ 10 GCL™ 20 Low-light Imaging Camera GDL™ 40 GET™ 10 GFL™ 10 GFS™ 10 GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™ GHP™ 20 Marine Autopilot System with SmartPump GMI™ 10/20 Marine Instrument GPS 19x NMEA 2000® GPSMAP® Series VHF 200/300 Marine Radio VHF 300 AIS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAA100 NMEA 2000®Rudder Angle Adapter The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200. The RAA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with existing analog gauges so you don't have to give up your existing analog gauges to enjoy the advantages of digitally networked information. Features: Rudder Angle WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.