With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Talon Pontoon Edge Mount Kit Features: Basic Pontoon Mounting Kit for Talon Shallow Water Anchors Deck edge mount design to fit most pontoon styles Contains edge mount Talon bracket, under deck support bracket and hardware

Through hull transducer mounting kit Kit for mounting depth transducer through wooden or steel hulls.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

50/200kHz Skimmer Transducer Mounting Kit Features: 50/200kHz Skimmer transducer mounting kit Heavy duty plastic mounting bracket

MKR-DSC-15 DSC Transducer Adapter Cable - Lowrance® 8-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in dual-spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

Don't miss out on Minn Kota's Endura Transom Mount trolling motors promotion now until June 15th, 2008.  For all the detail please check out our Rebate Corner.

MKR-DSC-14 DSC Transducer Adapter Cable - Garmin® 8-PIN The adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-10 DSC Transducer Adapter Cable - Lowrance® 7-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-16 DSC Transducer Adapter Cable - Lowrance® 9-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7 MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.  Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX 7 models Adapter not required for SOLIX models Cable length: 30 inches Compatible Units: HELIX 7 CHIRP GPS G2N*/G3N The built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer. *HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.

MKR-DSC-12 DSC Transducer Adapter Cable - Garmin® 4-PIN The adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-30 Remote Power Switch Allows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch. Features: Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30 ft. lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova, and Riptide Instinct motors Specifications: Warranty: One-Year Warranty

Prop & Nut Kits "A" (MKP-9) Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota® prop dimensions (3/8", 1/2" and 5/16"). Includes prop nut and washer. Requires a crescent wrench for installation. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-49 Cable & Handle For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable. Features: Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKP-23 Prop & Nut Kit D  Quickly, easily remove or replace your prop with this kit. A crescent wrench is required for installation.  Compatible with Minn Kota Props:MKP-24 Weedless Wedge (part number 2331130 / 1865013) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.