When wiring, use these heavy-duty, 10-gauge connectors where a plug and socket can't be used. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKR-28 Trolling Motor Plug & Receptacle The MKR-28 trolling Motor Plug and Receptacle provides continuous power and are rated to 60 amps up to 48V. Designed for freshwater and saltwater applications, silver-plated terminals provide reliable use in the harshest conditions. This plug is the recommended replacement for the MKR-18 Plug & Receptacle (part number 1865102) and MKR-26 (part number 1865128). Package includes: trolling motor plug with 18” wire lead, receptacle with 24” wire lead, mounting faceplate, dust cap, 1-10 AWG splicer, 1 AWG ferrule, 2 AWG ferrule, 4 AWG ferrule, heat shrink, hex wrench, and installation manual. Features: Trolling Motor Plug and Receptacle provide continuous power rated to 60 amps up to 48V Designed for freshwater and saltwater applications Silver-plated terminals for a reliable corrosion-resistant connection in any freshwater or saltwater application Sealed waterproof design Secure threaded electrical connection Adjustable mounting orientations Continuous power rated to 60 amps up to 48V 8 AWG wire leads Compatible with 1 - 10 AWG wire sizes

DeckHand Pontoon Manufacturer item #1810141 For pontoons, this DeckHand gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. Automatically raise and lower your anchor at the touch of a button. DeckHand 40 has a 40-lb anchor capacity (anchor not included) and is pre-spooled with 100 feet of 800-lb test nylon rope. Universal davit can be mounted at base of DeckHand or in remote position on boat deck. Davit also stows anchor horizontally to eliminate anchor swing. Anchor shackle allows for quick changes between anchors. A special anti-drag system senses the bottom to allow for controlled drifting. Runs on 12-volt battery (not included). Includes: Standard DeckHand 40 anchor winch MKA-16-02 Quick Release Bracket Corded Remote Accessory (DH-40) MKR-12 quick connect plug WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

  Double Down! 2019 Minn Kota Talon Promotion   To receive your rebate, purchase (2) two qualifying Minn Kota Talon 12' or 15' models now until June 30th, 2019. Receive up to $500 by submitting online only.  Don't miss out on this fantastic offer!   Offer valid now until June 30th, 2019.     Save $500 on Two Minn Kota Talon   It's the only shallow water anchor that goes down to 15' deep. The only one you can control from anywhere on the boat. And the only one with User-Selectable Anchoring Modes that let you anchor in anything. When it comes to dominating shallow water, Talon is the only name you need to know.   Offer valid now until June 30th, 2019.         Specials    Closeouts   Remanufactured    Rebates  

MKR-DSC-15 DSC Transducer Adapter Cable - Lowrance® 8-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in dual-spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-14 DSC Transducer Adapter Cable - Garmin® 8-PIN The adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-10 DSC Transducer Adapter Cable - Lowrance® 7-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-16 DSC Transducer Adapter Cable - Lowrance® 9-PIN The adapter connects select Lowrance fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Lowrance® fish finders with a Minn Kota motor and a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

MKR-DSC-12 DSC Transducer Adapter Cable - Garmin® 4-PIN The adapter connects select Garmin fish finders with Minn Kota's built-in Dual Spectrum CHIRP transducer on your trolling motor. Shielded, IP68-rated waterproof connectors are metal-tipped to prevent sonar interference. *Only provides traditional 2D sonar. Features: Connects select Garmin® fish finders with a built-in Dual Spectrum CHIRP transducer Shielded cable for crystal-clear sonar performance Waterproof heavy-duty composite connector Compatible with 2D sonar only

This heavy-duty trolling motor connector uses a snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included). WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKR-MDI-2 Humminbird HELIX MDI Sonar Adapter Cable for HELIX 7 MEGA Imaging® uses high-frequency sonar so you can easily distinguish fish from structure, see the direction fish are facing and even target individual species. And now with MEGA Imaging+, you'll be able to scan deeper and wider without sacrificing clarity. Adapter connects your Humminbird HELIX 7 G3/G4 fish finder with a built-in MEGA Down Imaging transducer on your trolling motor.  Connects your Humminbird HELIX fish finder to a Minn Kota motor equipped with Built-In MEGA Down Imaging Shielded cable for crystal-clear MEGA Down Imaging sonar performance Compatible with HELIX 7 models Adapter not required for SOLIX models Cable length: 30 inches Compatible Units: HELIX 7 CHIRP GPS G2N*/G3N The built-in transducer cannot supply MEGA Down Imaging to Humminbird models that do not already have the capability. If you have a G2/G2N or a G3/G3N HELIX that is not a MEGA SI or MEGA DI model, you will still get 2D CHIRP Digital Sonar from the transducer. *HELIX G2 and G2N units need to be running the latest software update to view sonar from Built-In MEGA Down Imaging motors.

MKR-30 Remote Power Switch Allows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch. Features: Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30 ft. lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova, and Riptide Instinct motors Specifications: Warranty: One-Year Warranty

Minn Kota Minn Kota is the oldest manufacturer of electric fishing motors in the world with nearly 70 years of hard-earned experience in the lab and on the water. Their list of Minn Kota firsts supports this commitment to trolling motor development and the fishing community. Today, Minn Kota is the unquestioned leader in the trolling motor industry, enjoying dominant market share in both bow-mount and transom-mount motors.

Don't miss out on Minn Kota's Endura Transom Mount trolling motors promotion now until June 15th, 2008.  For all the detail please check out our Rebate Corner.

  RAPTOR IS RELENTLESS   Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.     FIND THE RAPTOR FOR YOUR RIG   Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.     JUST THE RIGHT AMOUNT OF HOLD   Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.       Specials    Closeouts    Remanufactured    Rebates