RAM Mount 1.5" Diameter Ball Flat Surface Mount w/2.5" Round Base & Diamond Base The RAM-138U consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, double socket arm and diamond base adapter. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.35" Material: Powder Coated Marine Grade Aluminum Ball Size 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round Base The RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Unpackaged Ram Wedge Mount Keeping things simple and versatile, the new RAM Ball Wedge Mounts are a great way to provide a mounting point to practically anything. Simply slide the wedge into the round opening of your rod holder base and tighten the screw. The new RAM Ball Wedge Base expands to accommodate holes from 7/8"- 1" diameter and locks in tight. Once installed, you have the perfect way to mount anything from RAM Rod holders, GPS, Cell Phone, Cup Holder, Fishfinder, or Flash Light which can all be supported and perfectly positioned using this great new product. Features: Compatible With: Scotty bases, Hobie Kayaks with sail mount ports 7/8"-1" diameter Material: High Strength Composite Ball Size: 1.5"

RAM-ROD 1.5" Diameter Ball & Hardware f/RAM 5 Spot Mounting Base Color: Black Material: High Strength Composite

1.5" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

RAM Motorcycle 1" Ball Adapter for Brake/Clutch Reservoir Base This ball connects to the open hole on the side of the RAM-B-309-1U (single 1" ball) and is included with the purchase of the RAM-B-309-2U (double 1" ball). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Diameter Ball Mount with 2/2.5" Round Bases - AMPs Hole Pattern The RAM-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.35" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. If you prefer a smaller double socket arm with two round bases, RAM recommends the RAM-B-101U.

RAM 1.5" Diameter Ball Mount with Short Double Socket Arm & 2/2.5" Round Bases w/AMPs Hole Pattern The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length) The RAM-B-101U-C consists of a long double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.3125" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5 Inch Ball Base with Strap 0.5 Inch to 2 Inch Diameter The RAM-108B consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM 1.5" Ball Base w/Strap 0.5" to 2" Diameter The RAM-108BU consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series Fishfinders The RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.

1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

1.5" Ball Adapter for John Deere Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Compatibility: Compatible with the GS2600 & GS2630 John Deere displays Weight: 0.4 lbs.